MadStad Engineering MadStad User manual

MadStad Speedmaster Installaon
Fork-Mount Brackets:
Aaching the Windshield or Fly Screen:
Rotate locking tabs against
brackets as shown below.
Set brackets onto aluminum
mounng spools.
Fully seat brackets into the
slots on the spools.
Pull up on the locking tab
and rotate onto the spools.
Make sure the locking tab is fully
pushed down over the two spools.
Remove the factory bolt on the
top fork tree. Install bracket as
shown then fully ghten both
top and boom.
Remove the factory top bolt on
the boom fork tree. Install
bracket as shown below but do
not fully ghten.

Aaching the Lower Deectors:
Set brackets onto aluminum
mounng spools. Rotate
locking tab up as shown.
Fully seat brackets into the
slots on the spools.
Pull up on the locking tab and
rotate between the spools. You
may need to push on the spring
from the inside.
Make sure the locking tab is fully
pushed down between the two spools.