MAG FOCUS Series User manual

FOCUS Series User Manual rev 1.00
[e-mail] Tel./Fax: [phone] www.mag-audio.com
1
User Manual
Systems:
Focus 12
Focus 12A
Focus 15
Focus 15A
Focus Sub
Focus Sub A
FOCUS SERIES

FOCUS Series User Manual rev 1.00
[e-mail] Tel./Fax: [phone] www.mag-audio.com
2
Contents
Contents............................................................................................................................................................................................2
Panel A. Dimensions ....................................................................................................................................................................4
1. Safety instructions ...................................................................................................................................................................6
2. Regulatory information.........................................................................................................................................................7
3. FOCUS series............................................................................................................................................................................. 8
3.1 Introduction ......................................................................................................................................................................... 8
3.2 FOCUS series speaker models ................................................................................................................................... 8
4. Specifications.............................................................................................................................................................................9
5. System operation.................................................................................................................................................................. 10
5.1. Rigging................................................................................................................................................................................ 10
5.2. FOCUS series assemblies .......................................................................................................................................... 10
5.2.1 Assembling the monitoring stack .................................................................................................................. 10
5.2.2 MONITORING series pole mounting...............................................................................................................11
5.2.3. Wall and ceiling mounting. ..................................................................................................................................11
5.3. Passive speakers .............................................................................................................................................................12
5.3.1. Passive connections ...............................................................................................................................................12
5.4. Powered speakers..........................................................................................................................................................13
5.4.1. Preset description...................................................................................................................................................14
6. Standard contents.................................................................................................................................................................14
7. Accessories ................................................................................................................................................................................14
8. Warranty and assistance ....................................................................................................................................................15
8.1. Product warranty............................................................................................................................................................15
8.2. Assistance..........................................................................................................................................................................15

FOCUS Series User Manual rev 1.00
[e-mail] Tel./Fax: [phone] www.mag-audio.com
3

FOCUS Series User Manual rev 1.00
[e-mail] Tel./Fax: [phone] www.mag-audio.com
4
Panel A. Dimensions
Focus 12
Focus 12A
Focus 15
Focus 15A
490
450
431
255
320
175
321
590
522
507
300
358
211
373

FOCUS Series User Manual rev 1.00
[e-mail] Tel./Fax: [phone] www.mag-audio.com
5
Focus Sub
Focus Sub A
601655
441
232
178
242

FOCUS Series User Manual rev 1.00
[e-mail] Tel./Fax: [phone] www.mag-audio.com
6
1. Safety instructions
1. Read these instructions carefully.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this equipment near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8. Do not use near heat sources such as stoves, heat registers,
radiators or other equipment (including amplifiers)that produces
heat.
9. Do not use the unit near open fire sources.
10. Connect the unit only to the electric network with grounding.
Use only electric plugs that provide grounding.
11. Protect the power cord from being walked on, pinched, or
otherwise damaged.
12. Use only accessories specified by the manufacturer.
13. Unplug this unit during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the system has been damaged in any way, such
as power supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the unit, the unit has been exposed
to rain or moisture, does not operate normally, or has been
dropped.
15. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS SYSTEM UNIT TO RAIN OR
MOISTURE.
THIS UNIT CONTAINS POTENTIALLY LETHAL VOLTAGES.
TO PREVENT ELECTRIC SHOCK OR HAZARD, DO NOT
REMOVE THE AMPLIFIER MODULE. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
INSTALLING OF THIS UNIT MUST BE PERFORMED ONLY BY
QUALIFIED TRAINED PERSONNEL FOLLOWING APPLICABLE
SAFETY RULES. DO NOT ALLOW INSTALLATION OF THIS UNIT
IF INSTALLATION HARDWARE IS BROKEN, BENT, PARTS ARE
MISSING OR IS OTHERWISE DAMAGED.
The triangle with the lightning bolt is used to alert the
user to the risk of electric shock.
The triangle with the exclamation point is used to
alert the user to important operating or maintenance
instructions.
The CE-mark indicates the compliance with the low
voltage and electromagnetic compatibility.
Symbol for earth/ground connection.
Symbol indicating that the equipment is for indoor use
only.
Symbol for conformity with Directive 2002/96/EC and
Directive 2003/108/EC of the European Parliament on
waste electrical and electronic equipment (WEEE).
WARNING:TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT ATTEMPT TO OPEN ANY PART OF THE
UNIT. NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
TO COMPLETELY DISCONNECT THIS APPARATUS
FROM THE AC MAINS, DISCONNECT THE POWER
SUPPLY CORD PLUG FROM THE AC RECEPTACLE.
THE MAINS PLUG OF THE POWER SUPPLY CORD
MUST REMAIN READILY ACCESSIBLE.
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR
MOISTURE, DRIPPING OR SPLASHING LIQUIDS.
OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,
SHOULD NOT BE PLACED ON THIS APPARATUS.
CONNECTIONS TO THE MAINS SHALL BE DONE ONLY
BY AN ELECTROTECHNICALLY SKILLED PERSON
ACCORDING TO THE NATIONAL REQUIREMENTS OF
THE COUNTRIES WHERE THE UNIT IS SOLD.
EXPLANATIONS OF GRAPHICAL SYMBOLS IMPORTANT SAFETY INSTRUCTIONS
= =
=
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN

FOCUS Series User Manual rev 1.00
[e-mail] Tel./Fax: [phone] www.mag-audio.com
7
2. Regulatory information
FCC COMPLIANCE NOTICE
This device complies with part 15 of the FCC
rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
CAUTION: Changes or modifications not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to part 15 ofthe FCC Rules.These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined
by turning the equipment o and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment
and receiver.
- Connect the equipment to an outlet on a
circuit dierent from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV
technician for help.
EC DECLARATION OF CONFORMITY
Manufacturer:
MAG Audio LLC
Merezhna 2
Bila Tserkva, Kyiv region
09112 Ukraine
We declare that under our sole responsibility the
products:
Focus 12, Focus 12A, Focus
15, Focus 15A, Focus Sub,
Focus Sub A
Intended use: Professional Speaker System
Are in conformity with the provisions of the
following EC Directives, including all amendments,
and with the national legislation implementing
these directives:
- 2006/95/EC Low Voltage Directive
- 2004/108/EC Electromagnetic Compatibility Directive
- 2002/95/CE RoHs Directive
The following harmonized standards are applied:
EN 55103-1:2009 /A1:2012
EN 55014-1:2006 /A1:2009 /A2:2011
EN 55022:2010 /AC:2011
EN 61000-3-2:2006 /A1:2009 /A2: 2009
EN 61000-3-3:2013
EN 61000-3-11:2000
EN 61000-3-12:2011
EN 55103-2:2009 /IS:2012
EN 61000-4-2:2009
EN 61000-4-3:2006 /A1:2008 /IS1:2009 /A2:2010
EN 61000-4-4:2012
EN 61000-4-5:2006
EN 61000-4-6:2014
EN 61000-4-11:2004
EN 60065:2002 /A1:2006 /A11:2008 /A2:2010 /A12:2011
Bila Tserkva,
22 January 2019
Alexey Asanov
CEO
For compliance questions: inf[email protected]
Model Names:

FOCUS Series User Manual rev 1.00
[e-mail] Tel./Fax: [phone] www.mag-audio.com
8
3. FOCUS series
3.1 Introduction
Coaxial line of low-profile stage monitors with no
casual name – coaxial design of drivers provides
perfect phase coherence and clear focused sound
picture in front of performer. Vocal has never
sounded so clearly and thoroughly before.
The series includes top-class monitors Focus 12,
Focus 15 and a Focus Sub subwoofer. Almost
reference sound quality of the monitors even in
passive crossover mode allows to use them as
all-purpose systems, for which case a pole mount
adapter is conveniently provided.
Special 15” subwoofer Focus Sub boosts versality
of Focuses even more: it creates powerful monitor
set for a drummer together with Focus 15; or can
be used for DJ monitoring and even FOH purposes
due to distance pole adapters. Besides ideal sound
quality and reproduction purity, we have paid much
attention to appearance and ease of use. Modern
look, rigid grill backed with acoustic foam, light
weight and stable design make Focus monitors
comfortable and practical in small installations as
well as in big concert tours.
Neutrik speakON connectors are placed on both
side of cabinet, making it convenient to create
monitor chains. Also, passive/bi-amp crossover
switches are optionally available for Focus 12 and
Focus 15 along with the speaker processor packed
with factory presets.
3.2 FOCUS series speaker models
FOCUS series includes following speaker models:
Focus 12 part number 00-00001271
Focus 12A part number 00-00001272
Focus 15 part number 00-00001273
Focus 15A part number 00-00001274
Focus Sub part number 00-00001275
Focus Sub A part number 00-00001276

FOCUS Series User Manual rev 1.00
[e-mail] Tel./Fax: [phone] www.mag-audio.com
9
4. Specifications
System
Focus 12
Versatile passive stage
monitor
Focus 15
Versatile passive stage
monitor
Focus Sub
Passive monitor subwoofer
Frequency Response (−10dB) 70 - 20000 Hz 60 - 19000 Hz 45 - 350 Hz
Max SPL 1131,5 dB 132 dB 134 dB
Sensitivity (1W/1m) 96,5 dB 97 dB 96,5 dB
Driver 12” coaxial 15” coaxial 15”, 4” VC
Impedance 8 Ohm 8 Ohm 8 Ohm
Nominal coverage angle
(Horizontal x Vertical)
40° x 60° or 60° x 40°,
rotating horn selectable
40° x 60° or 60° x 40°,
rotating horn selectable -
Nominal power 2400 W 400 W 700 W
Connectors 2x Neutrik Speakon; Bi-amp /
Passive switch
2x Neutrik Speakon; Bi-amp /
Passive switch 2x Neutrik Speakon
Dimensions (W×H×D), mm 490x320x431 mm 590x358x507 mm 601x441x655 mm
Net weight, kg 18,5 kg 21 kg 34 kg
Shipping weight, kg 21 kg 22 kg 36 kg
Mounting
Pole mount adapter;
U-Bracket flying mount
(optional)
Pole mount adapter;
U-Bracket flying mount
(optional)
M20 distance adapter
Enclosure materials Plywood; wear-resistant
paint
Plywood; wear-resistant
paint
Plywood; wear-resistant
paint
Grill Steel grill, polymere
protective net
Steel grill, polymere
protective net
Steel grill, polymere
protective net
1 - peak value, calculated according to AES 2 - 2012
2- based on transducer power measured according to AES 2 - 2012
System Focus 12A Focus 15A Focus Sub A
Type Versatile powered stage
monitor
Versatile powered stage
monitor Powered monitor subwoofer
Frequency Response (−10dB) 70 - 18000 Hz 60 - 18000 Hz 45 - 200 Hz
Max SPL (calculated) 128,5 dB 129 dB 131 dB
Driver 12” Coaxial 15” Coaxial 15”, 4” VC
Nominal Coverage Angle
(Horizontal × Vertical)
40° x 60° or 60° x 40°,
rotating horn selectable
40° x 60° or 60° x 40°,
rotating horn selectable -
Amplifier power 700 W 700 W 1500 W
Amplifier Class D, fan cooling, DSP
with phase-linear FIR
Class D, fan cooling, DSP with
phase-linear FIR
Class D, fan cooling, DSP with
phase-linear FIR
Input sensivity +4 dBV +4 dBV +4 dBV
Connectors XLR in + XLR out XLR in + XLR out XLR in + XLR out
Dimensions (W×H×D) 490x320x431 mm 590x358x507 mm 601x441x655 mm
Net weight 20 kg 22 kg 36 kg
Shipping weight 22 kg 24 kg 38 kg
Mounting
Pole mount adapter;
U-Bracket flying mount
(optional)
Pole mount adapter;
U-Bracket flying mount
(optional)
M20 distance pole adapter
Enclosure material Plywood; wear-resistant
paint Plywood; wear-resistant paint Plywood; wear-resistant paint
Grill Steel grill, polymere
protective net
Steel grill, polymere protective
net
Steel grill, polymere protective
net

FOCUS Series User Manual rev 1.00
[e-mail] Tel./Fax: [phone] www.mag-audio.com
10
5. System operation
5.1. Rigging
There are numerous installation option available for FOCUS series.
Rigging must be performed only by trained personnel following the established safety rules.
MAXIMUM WEIGHT RESTRICTIONS MUST BE FOLLOWED AT ALL TIMES!
MAKE SURE THE SUPPORT STRUCTURE IS CAPABLE OF HOLDING THE APPLIED WEIGHT WHILE
SUSPENDING THE SYSTEM!
5.2. FOCUS series assemblies
5.2.1 Assembling the monitoring stack
Focus 15 (A) can be assembled into the
monitoring stack with Focus Sub (A) for
addtional low-frequence outputs for
drummers, DJ, and other applications. Use
4 sockets to firmly position Focus 15 (A)
onto the Focus Sub (A). (Pic. 1, 2).
1
2

FOCUS Series User Manual rev 1.00
[e-mail] Tel./Fax: [phone] www.mag-audio.com
11
5.2.2 MONITORING series pole mounting
Accessories:
N-BOX-4 (part No. 00-00003474)
SAT-3T (part No. 00-00003644)
Focus 12(A) and Focus 15(A) can be used as
FOH speakers while installed onto Focus
Sub(A) using distance pole.
- Insert distance pole into M20 socket on
the upper panel of the Focus Sub(A). (Pic. 3)
- Alternatively, put subwoofer on the side
and insert distance pole into M20 socket
on the other side panel of the Focus Sub(A).
(Pic. 4)
- Mount the Focus 12(A) or the Focus 15(A)
onto the pole using the adapter found in
the handle. (Pic 5)
5.2.3. Wall and ceiling mounting.
Accessories:
FCS-12 (part No. 00-00003746)
FCS-15 (part No. 00-00003745)
Focus 12(A) and Focus 15(A) can be mounted
onto wall or ceiling using FCS-12M or FCS-
15M mounting kits respectively.
- Release two M6 bolts on both handle
adapters of FCS-12M (FCS-15M) enough
to easily insert them into handles of Focus
12(A) or Focus 15(A). (Pic. 6)
- Rotate handle adapters by 90° and
tighten two M6 bolts on both sides. (Pic. 7)
- Attach the bracket and secure it with M10
bolts on both sides. (Pic. 8)
- Use provided mounting holes of FCS-12M
(FCS-15M) to attach assembly to wall or
ceiling. (Pic. 9)
3
5
6
8 9
7
4

FOCUS Series User Manual rev 1.00
[e-mail] Tel./Fax: [phone] www.mag-audio.com
12
Focus series connection diagram
5.3.1. Passive connections
Use power amplifier with DSP or
power amplifiers with external speaker
processor with Focus series systems.
MAKE SURE TO USE HIGH PASS
FILTER FOR ALL NX SERIES
SYSTEMS TO PREVENT EXCESSIVE
CONE MOVEMENT, RESULTING IN
TRANSDUCER DAMAGE OR FAST
DETERIORATION.
Recommended HPF settings,
suggested power amplifier ratings,
and connection pins are found in table
below:
System Amplifier power Amplifier impedance Connection pins Recommended HPF
Focus 12 400 - 800 W 8 Ohm +1 -1 Passive 65 Hz or higher, 18 dB/oct min
Focus 12 350 - 700 W 8 Ohm +1 -1 Bi-amp 65 Hz or higher, 18 dB/oct min
Focus 12 75 - 150 W 8 Ohm +2 -2 Bi-amp 1200 Hz or higher, 18 dB/oct min
Focus 15 400 - 800 W 8 Ohm +1 -1 Passive 60 Hz or higher, 18 dB/oct min
Focus 15 350 - 700 W 8 Ohm +1 -1 Bi-amp 60 Hz or higher, 18 dB/oct min
Focus 15 75 - 150 W 8 Ohm +2 -2 Bi-amp 1200 Hz or higher, 18 dB/oct min
Focus Sub 700 - 1400 W 8 Ohm +1 -1 Passive 40 Hz or higher, 18 dB/oct min
Focus 12 and Focus 15 connection plates Focus Sub connection plate
1. LABEL FIELD. Name of the system, along with its basic
parameters is noted here.
2. PARALLEL INPUTS. The pair of parallel Neutrik® Speakon
connectors. Use this connectors to connect power amplifier and
to feed the signal to the parallel system (optional).
3. SERIAL NUMBER FIELD. Sticker with the systems serial
number is located here. NEVER REMOVE THE SERIAL FROM
THE SYSTEM, AS IT IS AN IMMEDIATE WARRANTY VOID.
4. PASSIVE/BI-AMP SWITCH.
4
2
5.3. Passive speakers
3
2
1
2
Passive
Bi-amp
+1 -1 signal
+2 -2 nc
+1 -1 LO
+2 -2 HI
Made in Ukraine
1
2
3
PARALLELINPUTS
Made in Ukraine by Magnet Ltd. www.mag-audio.com
DSP AMPLIFIER
Speakon-Speakon
cable
Speakon-Speakon
cable
Speakon-Speakon
cable
Speakon-
Speakon
cable
Speakon-
Speakon
cable
Speakon-Speakon
cable
Focus series
passive monitor
Focus series
passive monitor
Focus series passive
monitor
Focus series passive
monitor
Focus series passive
monitor
Focus series passive
monitor

FOCUS Series User Manual rev 1.00
[e-mail] Tel./Fax: [phone] www.mag-audio.com
13
Focus 12A and Focus 15A
control panel
Focus Sub A control panel
5.4. Powered speakers
6
6
8 8
11
10 10
11
11
12
12
22
33
55
7 7
9 9
44
LIMIT
TEMP
SIGNAL
READY
PRESET1
PRESET2
PRESET3
PRESET4
PRESET
SELECT
LIMIT
TEMP
SIGNAL
READY
PRESET1
PRESET2
PRESET3
PRESET4
PRESET
SELECT
1. VOLUME KNOB. Used for adjusting the
volume of the system. Remember to turn
the volume dowm before connecting/
disconnecting INPUT or LINK connectors.
2. LIMIT LED. Is lit when limiter is
operational, indicating excessive signal
through the system.
3. TEMP LED. Is lit when tempreture
protection is in place, indicating
overheating.
4. SINGAL LED. Is lit when signal is
present on the INPUT connector.
5. READY LED. Is lit when system is fully
operational.
6. PRESET LEDS. Indicate the currently
selected system preset. For preset
description, refer to the “5.4.1 Preset
description” section of this manual, page
15.
7. LINK CONNECTOR. Used for linking
additional compactible system to same
signal source.
8. INPUT CONNECTOR. Used for
connecting the system to the signal
source (mixing console etc.)
9. PRESET SELECT BUTTON. Used for
switching currently selected system
preset.
10. HEAT SINK. Large heat sink for
eective heat dissipation.
11. PowerCon A CONNECTOR. Used for
connecting mains supply to the system.
12. PowerCon B CONNECTOR. Used
for feeding the mains supply to the
additional system.

FOCUS Series User Manual rev 1.00
[e-mail] Tel./Fax: [phone] www.mag-audio.com
14
5.4.1. Preset description
FOCUS series powered speakers house ready presets for numerous applications.
Focus 12A and Focus 15A preset list:
Preset Description
Preset 1 Primary stage monitor setting (+ additional fedback suppression for most popular vocal micro-
phones)
Preset 2 Full-range speaker (For tripod stand mounting)
Preset 3 Drum fill (For use in ground stack with Focus SubA)
Preset 4 Full-range speaker with HPF for pole mounting on Focus SubA
Focus Sub A preset list:
Preset Description
Preset 1 Standard - for pole mount assembly with Focus 12A or Focus 15A
Preset 2 Drum fill - for ground stacking with with Focus 15A
Preset 3 - not used -
Preset 4 - not used -
6. Standard contents
Please check complete complement of your FOCUS series system upon receiving the package.
Standard contents of FOCUS series systems:
System Supplied FOCUS series system FOCUS series
User Manual
CN-0010
PowerCon mains
cable
Polyethylene
bag Carton Box
Focus 12 Focus 12 8 Ohm passive monitor + + +
Focus 12A Focus 12A powered monitor + + + +
Focus 15 Focus 15 8 Ohm passive monitor + + +
Focus 15A Focus 15A powered monitor + + + +
Focus Sub Focus Sub 8 Ohm passive monitor
subwoofer + + +
Focus Sub A Focus Sub A powered monitor
subwoofer + + + +
7. Accessories
Various accessories are available for FOCUS series systems:
FCS-12M
Focus 12(A)
mounting kit
Part No. 00-0004819
FCS-15M
Focus 15(A)
mounting kit
Part No. 00-0004821
N-BOX-4 speaker
stand
Part No. 00-00003474
SAT-3T M20
Distance pole
Part No. 00-00003644

FOCUS Series User Manual rev 1.00
[e-mail] Tel./Fax: [phone] www.mag-audio.com
15
8. Warranty and assistance
8.2. Assistance
There are no user-serviceable parts in your
device. Refer servicing to qualified technical
personnel. In addition to in-house service
department, MAG Audio supports the chain of
distributors, authorized in repairs and service. If
your device needs repairing, contact your MAG
Audio dealer or distributor.
Occasionally, due to the nature of the failure, it
might be necessary to return defective products to
MAG Audio for repair. In this case, before shipping,
please kindly contact your MAG Audio distributor
or dealer, or MAG Audio directly. You will be
provided with the RMA number code and detailed
instructions regarding your particular case. Please
do not send products without a prior authorization.
Thank you for your understanding, cooperation and
choice of MAG Audio products.
8.1. Product warranty
1. By this warranty MAG Audio grants that all
equipment manufactured under the MAG Audio
trademark is free from defects in material,
components and factory workmanship under
the normal use and maintenance for the time as
specified below.
2. All warranty repairs and maintenance of MAG
Audio products shall be carried out at MAG Audio
production sites or by MAG Audio authorized
personnel at no cost for the product purchaser.
3. Warranty period for cone transducers, high
frequency drivers and crossovers, whether sold
separately or as a component of a speaker system,
is 60 months from the production date.
4. Warranty period for enclosures, grills, connection
plates and accessories, whether sold separately or
as a component of a speaker system, is 60 months
from the production date.
5. Warranty period for built-in power amplifiers,
whether sold separately or as a component of a
speaker system, is 36 months from the production
date.
6. Warranty repairs or maintenance will be
performed only if a) MAG Audio product was
purchased from an ocial MAG Audio distributor
/ dealer and b) warranty card with specified serial
number, production date, realization date, vendor’s
signature and stamp is presented.
7. Warranty shall not cover the following: damage
caused by accident, misuse or failure to follow
exploitation rules stated in technical manual;
repairs performed by non-authorized personnel;
mechanical damage caused by shipping accidents
and normal tear and wear.
8. Warranty shall not be applicable to any product
with defaced, removed, or modified serial number.
9. If your MAG Audio product needs repairing
or maintaining, contact your ocial MAG Audio
distributor / dealer. Please do not ship your MAG
Audio product without prior authorization.

FOCUS Series User Manual rev 1.00
[e-mail] Tel./Fax: [phone] www.mag-audio.com
16
2 Merezhna str., Bila Tserkva,
Kyiv region, 09100, Ukraine
Tel./Fax.: [phone]
e-mail: [e-mail]
www.mag-audio.com