664
‘MAKE YOUR AUDIENCE SCREAM’
MFX0802 - SUPER BLASTER XL
PREPARING THE SUPER BLASTER (CO2CONFETTI CANNON) >>
1). Remove the top of the flightcase. Take the woofer (1) the CO2gas tube, the spanner (3) and the aluminum pins (4) out of the case.
2). Select the position (1 - 3) of the woofer (1) and put the aluminum pins (4) through the case and the woofer. Make sure the connection
for the gas tube is on the bottom of the woofer.
3). Put the CO2tank (5) into a CO2WDQNWUROOH\DQGPDNHVXUHLW¶VVWDQGLQJVWDEOH
(on the picture you see 2 CO2cilinders but you only need 1 CO2cylinder)
4). Connect the gas tube (2) with the connection on the woofer with the spanner7KHVZLWFKRQWKHJDVWXEHPXVWEHLQ³RII´SRVLWLRQ
5). Connect the other side of the gas tube with the CO2cilinder (5).
6). Make sure the flightcase is standing stable by clicking the lock system on the weels of the flightcase.
7). Fill the bottom of the case with a little bit slow-fall confetti (just one hand).
LAUNCHING THE CONFETTI >>
1). Take care that the space around the Shooter is free of persons and objects. Check if the switch (6) on the gas pipe on the bottom of
WKHZRRIHULVVWLOOLQ³RII´SRVLWLRQ1RZRSHQ\RXUCO2cylinder (5). The pressure will stay into the gas tube.
2). WKHQWKHWLPHLVUHDG\RSHQWKHVZLWFKE\WXUQLQJLWLQWKH³RQ´SRVLWLRQ1RZWKHSUHVVXUHZLOOHVFDSHDQGODXQFKWKHFRnfetti from
the bottom of the case up to 25m. in the air. Now keep filling the bottom of the flightcase with confetti. You have the time to launch
maximum 20 kg slow-fall confetti in 90 seconds. Keep filling the shooter by throwing the confetti in the second part of the case. The
confetti will be sucked vacuum from the bottom.
3). When all the confetti has been launched into the air, close the CO2cylinder DQGSXWWKHVZLWFKRQWKHJDVWXEHEDFNLQWKH³RII´
position.
MANUFACTURER:
MAGIC FX B.V. ±Industrieweg 16 ±5281RW BOXTEL ±The Netherlands
T +31(0) 411 63 50 13 ±F +31(0)411 63 50 12
WWW.MAGICFX.EU INFO@MAGICFX.EU