Magicshine SEEMEE DV User manual

SEEMEE DV
USER MANUAL
EN

SEEMEE DV
WARNING
IN THE BOX
Seat post mount
Type-C
charging cable
8GB
microSD card

ON/OFF: Press and hold the power button to turn
the light on/off, the default output is the last mode
when turned off.
ENABLE/DISABLE THE DV: When the light is on, the
DV function is turned on by default. Press and hold
the camera button to turn on/off the DV function.
VIDEO RECORDING: When the DV function is on,
click the camera button to start/pause the video
recording.
PHOTO TAKING: When the DV function is on,
double click the camera button to take pictures.
DV INDICATOR:
1. When the DV is in video recording mode, the
indicator light will circle clockwise with red light.
2. When the DV is in pause recording or standby
mode, the indicator light will keep flashing red.
3. When the DV is in an abnormal state, the indicator
light will keep flashing white.
AUTOMATIC INCIDENT CAPTURE: With a built-in
accelerometer, the taillight continuously records and
automatically saves videos (before 5s, during, and after
55s of the event) if it detects an incident, and you can
access or download the footage through the APP.
OPERATION INSTRUCTIONS

*The sensor's sensitivity can be adjusted via the APP to
prevent unexpected triggering.
CHANGE MODE: When the light is on, click the power
button to cycle through LOW-HIGH-FLASH-ECO
FLASH mode.
MEMORY FUNCTION: When the light is turned on
again, it will turn to the last selected lighting mode
automatically.
LOW POWER MODE: When the remaining battery
power is lower than 10%, the lighting mode changes
to ECO FLASH mode. The DV function is disabled
during this period.
OUTPUT / RUNTIME
10h
8.5h
9h
10h
35h
12h
70h
110h
10-0LM
30-0LM
10LM
30LM
HIGH
LOW
ECO FLASH
FLASH
DV ONBRIGHTNESS DV OFF

*The sensor's sensitivity can be adjusted via the APP to
prevent unexpected triggering.
CHANGE MODE: When the light is on, click the power
button to cycle through LOW-HIGH-FLASH-ECO
FLASH mode.
MEMORY FUNCTION: When the light is turned on
again, it will turn to the last selected lighting mode
automatically.
LOW POWER MODE: When the remaining battery
power is lower than 10%, the lighting mode changes
to ECO FLASH mode. The DV function is disabled
during this period.
*All data are measured in accordance with
ANSI/NEMA FL 1-2009. The test was conducted at a
temperature of 25°C and a wind speed of 25 km/h.
The runtime may vary depending on external
temperature and ventilation conditions, and these
deviations may affect the result of testing.
When the light is off, click the power button to
display the remaining battery level for 3 seconds.
CHARGING / BATTERY INDICATOR
BATTERY INDICATOR
Charging: Flash red
Fully charged: Constant green
21%-100%：Constant green
11%-20%：Constant red
1%-10%：Flash red
Standard charging time approx.
4.5 hrs (5V 1A)

Scan and download the App, connect your phone to the
WIFI prefixed with CARDV, enter the initial password
1234567890 and check DV videos and photos via your
phone after the connection is completed.
APP PAIRING
HOW TO INSTALL
3.
4.
2.
1.