Magnaflux UV-A User manual

MAGNAFLUX7
UV-A LIGHT METER
Lighting Types UV-365 Sensor (320 - 400nm)
Display 4-Digit LCD
Accuracy ±10%
Sampling Time 1 Second
Sensor Cord length 45” (114 cm)
Power Supply DC 9V Battery
Dimensions (Unit) 7.08” x 3.14” x .41”
(18 x 8 x 3.6 cm)
Weight (Unit) 7.05 oz. (0.2kg)
Data Hold Yes
Range Selection Yes (x1, x10, x100 and x1000)
Low Battery Warning Yes
Warranty Manufacturer 1 Year Limited
OPERATING MANUAL
7
7
MAG AFLUX .3624 West Lake Avenue .Glenview, IL 60026
[phone] .CS@
magnaflux.com
.
www.magnaflux.com
MAGNAFLUX7UV-A LIGHT METER
SPECIFICATIONS:
The Magnaflux7UV-A Digital Light Meter comes loaded with all of the
standard features necessary to accurately monitor and calibrate
UV Black Light sources used in fluorescent magnetic particle and
liquid penetrant DT applications. The unit’s rugged, cost effective
design features many of the operating advantages of more expensive
UV light meters, but without the added cost or complexities of data
storage and plotting features for those who do not require them.
UV-A BLACK LIGHT METER SPECIFICATIONS
P/ 00-000

MAGNAFLUX7UV-A LIGHT METER
INTRODUCTION:
The Magnaflux7UV-A Digital Light Meter is a compact, rugged,
easy to operate, multi-function UV Meter proven to be highly
effective for measuring and calibrating UV-A light sources used in
fluorescent magnetic particle and liquid penetrant DT inspections.
The Magnaflux7UV-A Digital Light Meter comes with a detachable
remote sensor, high-contrast digital LCD display, 9V battery and
protective storage case.
FEATURES
1. Easy to read, high-contrast digital display
2. Power on/off button
3. Hold button for maintaining current reading
4. UV-365 nm wavelength selection button
5. Channel 2 (future use)
6. Unit range selection buttons (x1, x10, x100 and x1000)
7. Remote sensor jack
8. High-impact, protective shell
OPERATING INSTRUCTIONS
1. Plug the UV-365 Remote Sensor into the Remote Sensor
Jack on the front of the unit.
2. Power the unit on by depressing the Power Button. If LCD
display does not immediately respond, check battery and replace if
necessary. Note: If during operation a low battery warning appears
(LOBAT or ← symbol), power unit off and replace battery.
3. Select and depress the UV-365 Button and corresponding
Ran e Button (x1, x10, x100, or x1000).
4. Remove probe cover and place probe in test position. The
display window will provide a readout of the irradiance value
(unit: µW/cm2).
5. To maintain measurement data in readout display, depress the
Hold Button. To continue taking test readings, depress and
release the Hold Button.
6. Once readings have been completed, power unit off by pressing
and releasing the Power Button.
STORAGE
When not in use, the Magnaflux7UV-A Digital Light Meter should
be stored in its protective case to insulate the instrument from
strong vibrations or impact damage that could effect its operation.
For long term storage, an environment of 32º - 104ºF (0º - 40ºC)
with <85% Relative Humidity is recommended.
1
2
3
4
6
7
8
7
5