8
MODEL IDE TIFICATIO
2. Code for Echotel®transducer
9 M complete code for Echotel®transducer
ACTUATION LENGTH – specify per cm (0.39") increment
Total insertion length = actuation length + 6 mm (0.25")
9M1 transducers
003 Minimum 3 cm (1.2") – for metal transducers with NPT connections only
005 Minimum 5 cm (2") – for all other connections
304 Maximum 304 cm (120") – for Kynar®(PV F) material
330 Maximum 330 cm (130") – for all other materials
9M2 transducers "A" length
specify "B" length separately
(see drawing and note shown in the dimensions section)
013 Minimum 13 cm (5.1") – for metal transducers with NPT connections only
015 Mininimum 15 cm (5.9") – for all other connections
330 Maximum 330 cm (130")
A
Standard sensor: min -40 °C / max +165 °C (-40 °F / +325 °F)
C
Low temperature sensor: min -80 °C / max +120 °C (-110 °F / +250 °F) – only
available with 9M1-A
SENSOR TYPE
X = product with a specific customer requirement
23 1" 150 lbs ANSI RF¡
33 1 1/2" 150 lbs ANSI RF¡
43 2" 150 lbs ANSI RF¡
A SI Flanges for plastic transducers¿
BA
N 25 PN 16 EN 1092-1 Type A
CA
N 40 PN 16 EN 1092-1 Type A
A
N 50 PN 16 EN 1092-1 Type A
E (DI ) Flanges for plastic transducers¿
3T 1 1/2" Tri-clamp®
4T 2" Tri-clamp®
VV N 65 Varivent®type N
Hygienic
BS N 25 IN 11851
CS N 40 IN 11851
S N 50 IN 11851
¿CPVC flanges for CPVC transducers, Kynar®cladded SST flanges for Kynar®transducers
¡FF (flat face) flanges for CPVC transducers
PROCESS CONNECTION
Threaded (plastic transducers are only available with 3/4" PT connection)
11 3/4" NPT
21 1" NPT
12 3/4" BSP (G 3/4")
22 1" BSP (G 1")
23 1" 150 lbs ANSI RF
24 1" 300 lbs ANSI RF
25 1" 600 lbs ANSI RF
33 1 1/2" 150 lbs ANSI RF
34 1 1/2" 300 lbs ANSI RF
35 1 1/2" 600 lbs ANSI RF
43 2" 150 lbs ANSI RF
44 2" 300 lbs ANSI RF
45 2" 600 lbs ANSI RF
53 3" 150 lbs ANSI RF
54 3" 300 lbs ANSI RF
55 3" 600 lbs ANSI RF
63 4" 150 lbs ANSI RF
64 4" 300 lbs ANSI RF
65 4" 600 lbs ANSI RF
A SI Flanges for metal transducers
BB N 25
PN 16/25/40
EN 1092-1 Type A
BC N 25 PN 63/100 EN 1092-1 Type B2
CB N 40
PN 16/25/40
EN 1092-1 Type A
CC N 40 PN 63/100 EN 1092-1 Type B2
A N 50 PN 16 EN 1092-1 Type A
B N 50 PN 25/40 EN 1092-1 Type A
N 50 PN 63 EN 1092-1 Type B2
E N 50 PN 100 EN 1092-1 Type B2
EA N 80 PN 16 EN 1092-1 Type A
EB N 80 PN 25/40 EN 1092-1 Type A
E N 80 PN 63 EN 1092-1 Type B2
EE N 80 PN 100 EN 1092-1 Type B2
FA N 100 PN 16 EN 1092-1 Type A
FB N 100 PN 25/40 EN 1092-1 Type A
F N 100 PN 63 EN 1092-1 Type B2
FE N 100 PN 100 EN 1092-1 Type B2
E (DI ) Flanges for metal transducers
SEE PREVIOUS PAGE
