MAJORITY Madingley Hall CB23-DAB-WHT/BLK User manual

Majority Madingley Hall
Bedside DAB Radio
CB23-DAB-WHT/BLK
User Guide

Contents
Controls and Functions.............................. 1
What’s in the Box? .................................. 3
Instruction Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Basic Operation...........................................4
DAB Radio and Set up Preset for DAB Radio................5
FM Radio and Set up Preset for FM Radio ..................7
Aux-In and Dual USB Ports ................................9
Clock and Dual Alarm Setting ............................10
Alarm Sound and Snooze ................................11
Other Functions ...................................12
Technical Specification .............................14
Warranty ..........................................14
Important Safety Information ......................15
Watch video tutorials and register
your product for a FREE 3-year warranty
at www.majoritytech.co.uk
3
Y
E
A
R
F
R
E
E
E
X
T
E
N
D
E
D
W
A
R
R
A
N
T
Y

Instructions GuideControls and Functions
1
1
7 8 10911
14 15 16
17
12 13 6
5
2 43
1. LCD Display
2. Aux-In jack
3. DC 9v jack –
wall plug
4. Power On/Off

2
Controls and Functions
1
7 8 10911
14 15 16
17
12 13 6
5
2 43
5. USB Ports
6. Preset
7. Mode
8. Info
9. Alarm/Snooze/
Sleep
10. Volume Down
11. Volume Up
12. Standby/
Dimmer
13. Scan
14. Previous/Back
15. Enter
16. Next/Forward
17. Antenna

3
What’s in the Box?
●Majority Madingley Hall DAB Radio Clock
●UK Standard Plug DC 9v Power Supply
●User Guide

4
Instructions Guide
Please note all (Ref.) refer to the Controls and Functions
mapping guide on Page 1.
Basic Operation
Plug the connector into the back of the system labelled DC IN
(Ref.3) and the power supply into the mains.
Power Supply ‘ON/OFF’at back of system (Ref.4).
Fully extend the antenna (Ref.17) so that it can rotate to get the
best FM signal.
The radio will be in standby mode showing the time and date, this
will automatically update after the first time you use DAB radio.
Press and hold the‘Standby/Dimmer’ button to turn on the unit
(Ref.12). The system should go straight to “DAB+ Radio”.
Press the‘Mode’button (Ref.7) to switch between
“DAB/FM/AUX-IN"
Standby
To change the music system back into standby, press and hold
the ‘Standby/Dimmer’ button (Ref.12). To turn off fully press the
button on rear of the unit (Ref.4) and switch off at the mains.
The cord must be out of reach of children.

5
Instructions Guide
DAB Radio
Press and hold the‘Standby/Dimmer’ button (Ref.12). Then use
the ‘Mode’ button to select “DAB” radio.
Fully extend the antenna (Ref.17).
To auto scan, press the ‘Scan’ button (Ref.13) and then release.
This will start scanning up the frequency band and store all
stations that have a good signal.
The radio will automatically save all the stations with a strong
signal. After searching has finished it will automatically play the
first station stored.
To listen to all stations that have been stored use the‘Next’
(Ref.16) and ‘Prev’ (Ref.14) buttons to scroll through the stations.
The radio will display station information when you press the
‘Info’ button (Ref.8). Press multiple times to view all information
available.
When you power up the radio again after switching off, it will
automatically tune to the same station (DAB+ or FM) that was
last selected.
IMPORTANT: Please make sure you have
extended the antenna (Ref.17) to its full
length. This will then enable you to rotate it
to get the best signal.


6
Instructions Guide
How to store a preset radio station
Up to 10 preset stations can be set. To store a station that you
are currently playing:
Press and hold the ‘Preset’ button (Ref.6). Preset “Empty 01” will
flash on the display.
Press ‘Prev’ (Ref.14) or ‘Next’ (Ref.16) buttons to change the “01”
to the number you want to store the station as. Then press
‘Enter’ button (Ref.15) to save. The display will show “Preset “x”
stored”.
How to play a preset radio station
Press the‘Preset’ button (Ref.6).
Press ‘Prev’ (Ref.14) or ‘Next’ (Ref.16) buttons to scroll through
your preset stations.
Press ‘Enter’ button (Ref.15) to select your choice.

7
Instructions Guide
FM Radio
Press and hold the ‘Standby/Dimmer’ button (Ref.12).
Then press the ‘Mode’ button (Ref.7) to switch to “FM”. The first
time you do this FM frequency “87.5 MHz” will be displayed on
the screen.
Fully extend the antenna (Ref.17).
To auto scan press and hold the ‘Scan’ button (Ref.13) for a few
seconds and then release.
This will then start scanning up the frequency band and play
the first station it finds with a good signal.
How to tune a specific frequency
To listen to a specific frequency press and hold the ‘Next’
button (Ref.16) to search forward quickly and ‘Prev’ button
(Ref.14) to search back quickly. It will stop searching when the
button is released. To search slowly press the ‘Next’ (Ref.16) and
‘Prev’ buttons (Ref.14) multiple times rather than holding.
IMPORTANT: Please make sure you have
extended the antenna (Ref.17) to its full
length. This will then enable you to rotate
it to get the best signal.


8
Instructions Guide
How to store a preset radio station
Press and hold the ‘Preset’ button (Ref.6). Preset “Empty 01” will
flash on the display.
Press the ‘Prev’ (Ref.14) or ‘Next’ (Ref.16) buttons to change the
“01” to the number you want to store the station as.
Then press the ‘Enter’ button (Ref.15) to save.
The display will show “Preset “x” stored”.
How to play a preset radio station
Press the‘Preset’ button (Ref.6).
Press the ‘Prev’ (Ref.14) or ‘Next’ (Ref.16) buttons to scroll
through your preset stations. You can store up to 10 presets.
Press”Enter” button (Ref.15) to select your choice.