MAKELSAN Lion+ Series User manual

USER MANUAL
Lion+ Series
650 -2000 VA
Line Interactive UPS

UDD-SD-110/ Release Date: 19.12.2014/Rev No: 2/Rev. Date: 30.07.2015

LİON+ SERIES 650-2000VA
UDD-SD-110/ Release Date: 19.12.2014/Rev No: 1/Rev. Date: 30.07.2015
USER MANUAL
Lion+ Series
650 -2000 VA
Line Interactive UPS
UDD-SD-110

UDD-SD-110/ Release Date: 19.12.2014/Rev No: 1/Rev. Date: 30.07.2015
About The Manual
This manual is prepared for the users of Lion+ Series 650-2000 VA.
Companion Manuals
For further information about this device and its options, please visit www.makelsan.com.tr
Updates
Please visit www.makelsan.com.tr for updates. Always use the latest manuals.
Shipment
Carrying vehicles or handling accessories must have enough features and characteristics to carry
UPS’s weight.
DO NOT LIFT HEAVY DUTY WEIGHT WITHOUT HELP
Be more careful of sudden movements, especially when batteries are inside of cabinet.

LİON+ SERIES 650-2000VA CONTENTS
UDD-SD-110/ Release Date: 19.12.2014/Rev No: 1/Rev. Date: 30.07.2015
CONTENTS
1 Important Safety Instruction..............................................................................................................3!
2 Package Contenst...................................................................................................................................5!
3 Introduction ...........................................................................................................................................5!
4 Product Overview..................................................................................................................................6!
4.1 Front Panel..........................................................................................................................................6!
4.2 Back Panel ..........................................................................................................................................6!
4.3 Display................................................................................................................................................7!
4.4 Load Level Definition ........................................................................................................................7!
4.5 Battery Capacity Definition................................................................................................................8!
4.6 Overload Definition............................................................................................................................8!
4.7 Battery Low Definition.......................................................................................................................8!
5 Installation and Initial Startup...........................................................................................................9!
5.1 Placement and Storage Conditions.....................................................................................................9!
5.2 Connect to Utility and Charge ............................................................................................................9!
5.3 Connect the Loads ...........................................................................................................................10!
5.4 Connect LAN Cable, Modem or Phone Line for Surge Protection.................................................10!
5.5 Connect USB Cable.........................................................................................................................11!
5.6 Turn On / Off The Unit ....................................................................................................................11!
6 Functions and Operations.................................................................................................................12!
6.1 DC Start Function.............................................................................................................................12!
6.2 Green Power Function......................................................................................................................12!
6.3 AVR (Automatic Voltage Regulation).............................................................................................12!
6.4 Auto Restart While AC Recovery ....................................................................................................12!
6.5 Audio Indicator.................................................................................................................................12!
7 Software Installation On Your PC...................................................................................................13!
8 Maintenance.......................................................................................................................................14!
8.1 General .............................................................................................................................................14!
8.2 Fuses .................................................................................................................................................14!
8.3 Batteries............................................................................................................................................14!
9 Trouble Shooting ...............................................................................................................................15!
10 Specifications....................................................................................................................................15!
11 GUARANTEE..................................................................................................................................17!
11.1 Terms of Guarantee ........................................................................................................................17!
11.2 Cases Not Covered by the Guarantee.............................................................................................19!
12 CONTACT INFORMATION ........................................................................................................20!

UDD-SD-110/ Release Date: 19.12.2014/Rev No: 1/Rev. Date: 30.07.2015
1 Important Safety Instruction
CAUTION:
This product is specially designed for PCs and it is not recommended for use in any medical
equipment, life-supporting system and other specific important equipment.
CAUTION:
Do not plug the UPS into its own output.
CAUTION:
Do not attach a power strip or surge suppressor to the UPS.
CAUTION:
To reduce risk of overheating the UPS, do not cover the UPS´ cooling vents and avoid exposing the
unit to direct sunlight or installing the unit near heat emitting appliances such as space heaters or
furnaces.
CAUTION:
This unit intended for installation in a controlled environment (temperature controlled, indoor area free
of conductive contaminants). Avoid installing the UPS in locations where there is standing or running
water or excessive humidity and do not use it in any of the following environments:
•Any area with combustible gas, corrosive substance or heavy dust.
•Any area with extraordinarily high or low temperature (above 40˚C or below 0˚C) and
humidity of more than 90%.
•Any area exposed to direct sunshine or near any heating apparatus.
•Any area with serious vibrations.
•Outdoor.
CAUTION:
The utility power outlet shall be near the equipment and easily accessible.
CAUTION:
In the event of an emergency, press OFF button and disconnect the power cord from the AC power
supply to properly disable the UPS.
CAUTION:
The internal short circuiting of the UPS will lead to dangers such as electric shock or fire; therefore do
not allow liquids or any foreign object to enter the UPS. No water containers (such as a water glass) or
any other liquid-containing vessels shall be placed on the top of the UPS so as to avoid such dangers
as electric shock.
CAUTION:
Please do not use the UPS in excess of the rated load capacity.
CAUTION:
Unplug the UPS prior to cleaning and do not use liquid or spray detergent.
CAUTION:
Risk of electric shock, do not attempt to disassemble the unit. No user serviceable parts inside. Refer

UDD-SD-110/ Release Date: 19.12.2014/Rev No: 1/Rev. Date: 30.07.2015
servicing to qualified service personnel.
CAUTION:
If UPS is to be stored for a long time, it is recommended to recharge the batteries (by connecting the
utility power to UPS, switch “ON”), once a month for 24 hours to avoid a full battery discharge.
CAUTION:
In case smoke is found coming out from the device, please cut off the power supply quickly and
contact the distributor.
CAUTION:
The UPS contains one/two large-capacity batteries. So the shell shall not be opened, otherwise such
dangers as electric shock will be caused. If any internal overhaul or replacement of the battery is
required, please contact the distributor.
CAUTION:
Servicing of batteries should be performed or supervised by personnel knowledgeable of batteries and
the required precautions. Keep unauthorized personnel away from batteries.
CAUTION:
A battery can present a risk of electrical shock and high short circuit current. The following
precautions should be observed when working on batteries:
•Remove watches, rings, or other metal objects from the hand.
•Use tools with insulated handles and wear rubber gloves and boots.
•Do not lay tools or metal parts on top of batteries.
•Disconnect charging source prior connecting or disconnecting batteries terminals.
CAUTION:
When replacing batteries, replace with the same type and number of the sealed lead-acid batteries.
CAUTION:
The maximum ambient temperature rating is 40°C.
CAUTION:
Do not dispose of battery or batteries in a fire. The battery may explode.
CAUTION:
Do not open or mutilate the battery or batteries. Released electrolyte is harmful to the skin and eyes.
It may be toxic.
CAUTION:
Icon Φon the rating label stands for phase symbol.
CAUTION:
During the installation of this equipment it should be assured that the sum of the leakage currents of
the UPS and the connected loads does not exceed 3.5mA.

UDD-SD-110/ Release Date: 19.12.2014/Rev No: 1/Rev. Date: 30.07.2015
CAUTION:
Attention, hazardous through electric shock. Also with disconnection of this unit from the mains,
hazardous voltage still may be accessible through supply from battery. The battery supply should be
therefore disconnected in the plus and minus pole of the battery when maintenance or service work
inside the UPS is necessary.
CAUTION:
In the event that there is fire occurring in the vicinity, please use dry-power extinguishers. The use of
liquid extinguishers may give rise to the danger of electric shock.
NOTE: This product complies with the safety and environmental regulations in EU.
If the time arises to throw away your product, please recycle all the components possible. Batteries
and rechargeable batteries are not to be disposed in your domestic waste! Please recycle them at your
local recycling point. Together we can help to protect the environment.
2 Package Contents
You should have received the following items inside of package:
•UPS unit
•User manual
•AC input power cord
•USB communication cable (Optional)
3 Introduction
Lion+ series is an intelligent and compact line interactive UPS (Uninterruptable Power Supply) which
is designed to protect your personal computer or sensitive electronic equipments from all forms of
power interference, including complete power failures. It is equipped with many features that allow
any attached equipment to operate longer and more reliability.
•Easy to use and install utilized microprocessor control to maximize the reliability and
efficiency
•Equipped with built-in boost and buck AVR function
•DC Cold start function
•Green Power Function for energy saving
•Auto restart while AC recovery.
•Provides AC Overload protection
•RJ11/RJ45 (in/out) LAN/Modem/Phone line protection

UDD-SD-110/ Release Date: 19.12.2014/Rev No: 1/Rev. Date: 30.07.2015
4 Product Overview
4.1 Front Panel
650-850VA 1000-1500-2000VA
4.2 Back Panel
650-850VA 1000-1500-2000VA

UDD-SD-110/ Release Date: 19.12.2014/Rev No: 1/Rev. Date: 30.07.2015
4.3 Display
When LCD starts to work, it will display all
information for 3 seconds.
When in normal mode, it will display as below.
When in AVR mode, it will display as below. And
mark will flicker every 1 second.
When in battery mode, it will display as below. And the
mark will flicker every 1 second.
Note: If I/P-V<40V, input voltage will display ‘’000”
When in off charging mode, it will display as below.
Note: The output voltage always is displayed as
“000” in off charging mode.
When in fault mode, it will display as below.
‘’FAULT’’ character and ‘’0’’ character only.
4.4 Load Level Definition
Load level
Load bar indication
0%~25%
25%~50%
50%~75%
75%~100%

UDD-SD-110/ Release Date: 19.12.2014/Rev No: 1/Rev. Date: 30.07.2015
4.5 Battery Capacity Definition
1B model battery definition;
Battery bar indication
Battery level
Battery mode
Other mode
Battery voltage<11V
Battery voltage<12.7V
11V≤battery voltage<11.5V
12.7V≤battery voltage<13.2V
11.5V≤battery voltage<12.5V
13.2V≤battery voltage<13.5V
Battery voltage≥12.5V
Battery voltage≥13.5V
2B model battery definition;
Battery bar indication
Battery level
Battery mode
Other mode
Battery voltage<22V
Battery voltage<25.4V
22V≤battery voltage<23V
25.4V≤battery voltage<26.4V
23V≤battery voltage<25V
26.4V≤battery voltage<27V
Battery voltage≥25V
Battery voltage≥27V
4.6 Overload Definition
The mark will flicker every 1 second
4.7 Battery Low Definition
The mark will flicker every 1 second

UDD-SD-110/ Release Date: 19.12.2014/Rev No: 1/Rev. Date: 30.07.2015
5 Installation and Initial Startup
NOTE: Before installation, please inspect the unit. Be sure that nothing is damaged.
5.1 Placement and Storage Conditions
Install the UPS in a protected area that is free of excessive dust and has adequate air flow around the
unit, and is free from excessive dust, corrosive fumes and conductive contaminants. Please place the
UPS away from other units at least 20 cm to avoid interference. Do NOT operate the UPS where the
temperature exceeds 0-40° C and the humidity is over 0-90 % RH.
5.2 Connect to Utility and Charge
Plug in the AC input cord to the 2-pole, 3-wire grounded wall outlet. For the best results, we suggest
charging the battery at least 6 hours with no load (no electrical devices such as computers, monitors,
rtc.) connected before initial use. The unit charges its battery while connecting to the utility.

UDD-SD-110/ Release Date: 19.12.2014/Rev No: 1/Rev. Date: 30.07.2015
5.3 Connect the Loads
Plug in the loads to output receptacles on the rear panel of the UPS. Simply turn on the power switch
of UPS unit, and devices connected to the UPS will be protected by UPS unit
COUTION: Do not attach a power strip or surge suppressor t the UPS.
COUTION: Never connect a laser printer or scanner to the UPS unit, because in-rush current
generated by motor’s devices may cause the damage of the unit.
5.4 Connect LAN Cable, Modem or Phone Line for Surge Protection
Connect for example a single modem or phone line into surge-protected “IN” outlet on the back panel
of the UPS unit. Connect from “OUT” outlet to the computer with another phone line cable.

UDD-SD-110/ Release Date: 19.12.2014/Rev No: 1/Rev. Date: 30.07.2015
5.5 Connect USB Cable
To monitor the UPS status, such as unattended UPS shutdown and start-up, by using bundled software,
please connect the UPS and PC with USB cable included.
5.6 Turn On / Off The Unit
Turn on the UPS unit by pressing the power switch. Turn off the UPS unit by pressing again the power
switch

UDD-SD-110/ Release Date: 19.12.2014/Rev No: 1/Rev. Date: 30.07.2015
6 Functions and Operations
6.1 DC Start Function
DC Start Function enables UPS to be started up when AC utility power is not available and battery is
fully charged. Just simply press the power switch to turn on the UPS.
6.2 Green Power Function
These series are equipped with Green Power Function for saving power and protecting battery. The
feature of deep discharge protection is adoped on battery mode. If no load is connected to the UPS, it
will automatically shut down after 5 minutes for energy saving while running on battery mode. The
UPS will restart while AC recovery.
6.3 AVR (Automatic Voltage Regulation)
If the quality of the incoming mains is poor, the AVR boosts a low incoming voltage or reduces a high
one. The load receives a voltage within the normal range.
6.4 Auto Restart While AC Recovery
6.5 Audio Indicator
Audible Alarm
Situation
Sounding every 10 seconds
Battery mode
Sounding every 1 seconds
Battery low
Sounding every 0.5 seconds
Overload
Continuous sounding
Faulty

UDD-SD-110/ Release Date: 19.12.2014/Rev No: 1/Rev. Date: 30.07.2015
7 Software Installation On Your PC
Connected by USB to a PC or notebook, the Software enables communication between the UPS and
the computer. The UPS software monitors the status of the UPS, shuts down the system before the
UPS is exhausted and can remotely observe the UPS via the Network (enabling users to manage their
system more effectively). Upon AC failure or UPS battery low, UPS takes all necessary actions
without intervention from the system administrator. In addition to automatic file saving and system
shut-down functions, it can also send warning messages via pager, e-mail etc.
•Use the bundled CD and follow the on-screen instructions to install the software WinPower.
•Enter the following serial No. to install software: 511C1-01220-0100-478DF2A
•After the software is successfully installed, the communication with UPS has been
established and a green icon will appear in the system tray.
•Double-click the icon to use the monitor software (as above).
•You can schedule UPS shutdown/start-up and monitor UPS status through PC.
•Detail instructions please refer to the e-manual in the software.
Check http://www.ups-software-download.com/index.htm from time to time to get the latest
version of monitoring software.

UDD-SD-110/ Release Date: 19.12.2014/Rev No: 1/Rev. Date: 30.07.2015
8 Maintenance
8.1 General
The UPS is virtually maintenance free: take care of proper environmental conditions and keep air
inlets-outlets free of dust.
8.2 Fuses
If the AC input fuse is defect, be sure it is replaced by a compatible fuse from the same make and type.
Never short circuit batteries. When working with batteries, remove watches, rings and other metal
objects, and only use insulated tools.
8.3 Batteries
This series UPS only requires minimal maintenance. The battery used for standard models are value
regulated sealed lead-acid maintenance free battery. These models require minimal repairs. The only
requirement is to charge the UPS regularly in order to maximize the expected life of the battery. When
being connected to the mains power, whether the UPS is turned on or not, the UPS keeps charging the
batteries and also offers the protective function of overcharging and over-discharging.
Read all safety rules before replacing the battery.

UDD-SD-110/ Release Date: 19.12.2014/Rev No: 1/Rev. Date: 30.07.2015
9 Trouble Shooting
Symptom
Possible Cause
Remedy
1. Battery weak.
1. Charge battery up to 8 hours.
2. Battery defect.
2. Replace with the same type of
battery.
No LED display on the
front panel.
3. Power switch is not pressed.
3. Press the power switch again.
Alarm buzzer beeps
continuously when AC
supply in normal.
Overload of the UPS.
Verify that the load matches the UPS
capability specified in the specs.
1. Overload of the UPS.
1. Remove some non-critical load.
2. Battery voltage is too low.
2. Charge battery 8 hours or more.
When power failure back-
up time is shorten.
3. Battery defect due to high
temperature operation
environment, or improper
operation to battery.
3. Replace with the same type of
battery.
Mains normal but LED is
flashing.
Power cord is loose.
Reconnect the power cord properly.
If any abnormal situation accor that are not listed above, pleace call service people immediately.
10 Specifications
MODEL

UDD-SD-110/ Release Date: 19.12.2014/Rev No: 1/Rev. Date: 30.07.2015
CAPACITY
650VA/390W
850VA/510W
1000VA/600W
1500VA/900W
2000VA/1200W
INPUT
RATED VOLTAGE
220/230/240VAC
VOLTAGE RANGE
162VAC-268VAC±%7
FREQUENCY RANGE
50/60Hz ±%1
OUTPUT
RATED VOLTAGE
220/230/240VAC
VOLTAGE PRECISION
±%10 (Battery mode)
FREQUANCY (AC
MODE)
same as mains
FREQUANCY
(BATTERY MODE)
50/60Hz ±%1Hz
WAVEFORM
Modified sine wave
CREST FACTOR
3:1
TRANSFER TIME
2 ~ 6 ms, 10 ms Max.
4 ~ 8 ms, 10 ms Max.
OVERLOAD
line mode:
110%+20%/-10%; shutdown after 5 minutes and go to fault mode for all model.
120%+20%/-10%; shutdown immediately and go to fault mode for 1B model
120%+20%/-10%; shutdown after 8 sec and go to fault mode for 2B model
battery mode:
110%+20%/-10%; shutdown after 5 seconds
120%+20%/-10%; shutdown immediately
EFFICIENCY
INVERTER MODE
line mode: >95%
AVR mode: >88%
BATTERY MODE
>60%
BATTERY
BATTERY
CONFIGURATION
12V/7AH*1
12V/9AH*1
12V/7AH*2
12V/9AH*2
12V/9AH*2
CHARGE CURRENT
About 1A at normal mode
RECHARGE/CHARGING
TIME
6 hours to 90% at normal mode after complete discharge (Load>50%)
BACKUP TIME
~ 16 min.
~ 20 min.
~30 min.
~ 50 min.
~ 50 min.
PROTECTION
FULL PROTECTION
Discharge, overcharge, overload
protection
Discharge, overcharge, overload, short circut
protection
INDICATION
AC MODE
Green LED lighting
Green LED lighting
BATTERY MODE
Green LED lighting
Yellow LED lighting
FAULT
N/A
Red LED lighting
ALARM
BATTERY MODE
Sounding every 10 seconds
BATTERY LOW
Sounding every 1 seconds
OVERLOAD
Sounding every 0.5 seconds
FAULT
Continuously sounding
PHYSICAL
DIMENSION (W*D*H)
278*100*143 mm
365*139*195 mm (for 1B and 2B model)
PACKİNG (W*D*H)
332*142*225 mm
457 * 235 * 297 mm

UDD-SD-110/ Release Date: 19.12.2014/Rev No: 1/Rev. Date: 30.07.2015
NET WEIGHT
4.35kg
5.15kg
9.07kg
10.74kg
10.74kg
GROSS WEIGHT
4.55kg
5.35kg
10.2kg
12kg
12kg
OPERATING
ENVIRONMENT
TEMPERATURE
0℃~ 40℃
STORAGE
TEMPERATURE
-20℃~ 55℃
RELATIVE HUMIDITY
0 to 90%
AUDIBLE NOSE (at 1m)
≤40 dB
≤45 dB
OTHER
COMMUNICATION
PORT
USB
SOFTWARE
Windows family/Linux/Mac
11 GUARANTEE
11.1 Terms of Guarantee
!Our products are under a two-year guarantee starting from the date of delivery against
malfunctions resulting from production, material and workmanship faults. Malfunctions due to