Makers Making Change Bag Carrier User manual

V2.0 | FEB 2022
Bag Carrier
USER QUICK GUIDE
© 2021 by <Author>. This work is licensed under the CCBY SA 4.0 License: http://creativecommons.org/licenses/by-sa/4.0
Files available at <Replace with MMC Library Link> Page 1of 3
Introduction
The bag carrier is a low-cost,3D-printedhandheldtoolthat distributesthe weightof bags carried. This
3D Printed Assistive Device can assist people witharthritis or otherdisabilities to carry plastic bags and
reusable bags.
Features
This bag carrier comes in 3 differentsizes:small,medium,andlarge. The bag handlescan easilyloop
around the twocurvedhooks. This handle is slenderenoughthatit can eitherbe carried in hand or can
attach onto the side of a wheelchair. The handle is rounded toallows usersto comfortablygrip the
carrier.
Usage
This handle is usedto carry plastic or reusable bags. This handle can eitherbe carried in hand or can
attach onto the side of a wheelchair.
Compatibility
There are 3 differentsized handles in orderto try and accommodate manydifferenthandsizes. Please
referto the Sizing Guide to determine whichsize handle will workbestfor you.
Specifications
Weight(g)
Dimensions(mm)
X
Y
Z
Small
35
97
96
46
Medium
38
113
101
46
Large
41
127
106
46

V2.0 | FEB 2022
Bag Carrier
USER QUICK GUIDE
© 2021 by <Author>. This work is licensed under the CCBY SA 4.0 License: http://creativecommons.org/licenses/by-sa/4.0
Files available at <Replace with MMC Library Link> Page 2of 3
Cleaning
The bag carrier can be wipeddownwithsanitizing cleaners. Do not wash the phone stand in high heatas
it maycause it to melt or break. (i.e., do not putit in the dishwasher, the washingmachine,orsoak it in
hot water).

V2.0 | FEB 2022
Bag Carrier
USER QUICK GUIDE
© 2021 by <Author>. This work is licensed under the CCBY SA 4.0 License: http://creativecommons.org/licenses/by-sa/4.0
Files available at <Replace with MMC Library Link> Page 3of 3
Sizing Guide
Instructions:
1. Print out the Bag Carrier Sizing tool onthe followingpage.
2. With a ruler, measure the scale guideline to ensure thatit was printedto scale.
3. Extend yourhand out with your fingers together. Align the bottom section of your pointerfinger
with the outline of the hole of the handle.If yourfour fingersfit between the 2edges, the
handleshouldbe large enough.