Makita GA7070Y User manual
GA7070
GA7071
GA9070
GA9071
GA7070Y
GA9070Y
GA9071Y
EN Angle Grinder INSTRUCTION MANUAL 8
FR Meuleuse d’Angle MANUEL D’INSTRUCTIONS 18
DE Winkelschleifer BETRIEBSANLEITUNG 29
IT Smerigliatrice angolare ISTRUZIONI PER L’USO 41
NL Haakse slijpmachine GEBRUIKSAANWIJZING 52
ES Esmeriladora Angular MANUAL DE
INSTRUCCIONES 64
PT Esmerilhadeira Angular MANUAL DE INSTRUÇÕES 75
DA Vinkelsliber BRUGSANVISNING 86
EL 96
TR KULLANMA KILAVUZU 108
2
1
Fig.1
1
2
3
Fig.2
1
2
3
Fig.3
B
C
2
1
A
Fig.4
B
C
2
1
A
Fig.5
1
Fig.6
Fig.7
1
23
Fig.8
3
1
2
3
Fig.9
1
2
Fig.10
1
2
Fig.11
1
Fig.12
21
Fig.13
4
3
2
1
Fig.14
2
1
Fig.15
4
3
2
1
Fig.16
4
3
4
2
1
Fig.17
1
Fig.18
12
Fig.19
Fig.20
3
2
1
Fig.21
3
4
2
1
Fig.22
ø45
ø78
ø78
1
2
3
4
5
Fig.23
5
1
Fig.24
1
Fig.25
1
2
4
5
6
3
Fig.26
Fig.27
1
2
Fig.28
Fig.29
Fig.30
Fig.31
6
Fig.32
Fig.33
1
Fig.34
1
2
Fig.35
7
1
2
3
5
4
6
33
8
59
7
8
5
6
11
10
5
12
13
14
20
18
19
5
17 21
3
22
5
22
15
16
Fig.36
8ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: GA7070 /
GA7070Y
GA7071 GA9070 /
GA9070Y
GA9071 /
GA9071Y
Wheel diameter 180mm 230mm
Max. wheel thickness 7.2mm 6.5mm
Spindle thread
8,500min-1 6,600min-1
Overall length 506mm
Switch handle
Net weight 6.1 - 6.6 kg 6.2 - 6.7 kg 6.3 - 8.5 kg 6.4 - 8.5 kg
/II
Intended use
Power supply
the same voltage as indicated on the nameplate, and
Noise
-
ing to EN60745-2-3:
Model GA7070, GA7070Y
pA
WA
Model GA7071
pA
WA
Model GA9070, GA9070Y
pA
WA
Model GA9071, GA9071Y
pA
WA
NOTE:
NOTE:
WARNING: Wear ear protection.
WARNING: The noise emission during actual
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
trigger time).
Vibration
-
mined according to EN60745-2-3:
Model GA7070, GA7070Y
h, AG2
2
h, AG2
2
Work mode: disc sanding with normal side grip
h, DS2
2
h, DS2
2
Model GA7071
h, AG2
2
h, AG2
2
9ENGLISH
Work mode: disc sanding with normal side grip
h, DS2
2
h, DS2
2
Model GA9070, GA9070Y
h, AG2
2
h, AG2
2
Work mode: disc sanding with normal side grip
h, DS2or less
2
h, DS2
2
Model GA9071, GA9071Y
h, AG2
2
h, AG2
2
Work mode: disc sanding with normal side grip
h, DS2
2
h, DS2
2
NOTE:
NOTE:
WARNING: The vibration emission during
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
trigger time).
WARNING:
-
EC Declaration of Conformity
For European countries only
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
with this power tool.
Save all warnings and instruc-
tions for future reference.
Grinder safety warnings
Safety Warnings Common for Grinding, Sanding,
1.
This power tool is intended to function as a
all safety warnings, instructions, illustrations
2.
Operations such as polishing are not recom-
mended to be performed with this power tool.
Operations for which the power tool was not designed
3. -
cally designed and recommended by the tool
manufacturer.
safe operation.
4. The rated speed of the accessory must be at
least equal to the maximum speed marked on
the power tool.
5. The outside diameter and the thickness of your
accessory must be within the capacity rating
of your power tool.
6.
Threaded mounting of accessories must match
the grinder spindle thread. For accessories
7. Do not use a damaged accessory. Before each
use inspect the accessory such as abrasive
wheels for chips and cracks, backing pad for
cracks, tear or excess wear, wire brush for
loose or cracked wires. If power tool or acces-
sory is dropped, inspect for damage or install
an undamaged accessory. After inspecting and
installing an accessory, position yourself and
bystanders away from the plane of the rotating
accessory and run the power tool at maximum
no-load speed for one minute. Damaged acces-
time.
10 ENGLISH
8. Wear personal protective equipment.
Depending on application, use face shield,
safety goggles or safety glasses. As appro-
priate, wear dust mask, hearing protectors,
gloves and workshop apron capable of stop-
ping small abrasive or workpiece fragments.
Keep bystanders a safe distance away from
work area. Anyone entering the work area
must wear personal protective equipment.
area of operation.
10. Hold the power tool by insulated gripping
surfaces only, when performing an operation
where the cutting accessory may contact hid-
den wiring or its own cord.
operator an electric shock.
11. Position the cord clear of the spinning acces-
sory.
12. Never lay the power tool down until the acces-
sory has come to a complete stop. The spinning
13. Do not run the power tool while carrying it at
your side. Accidental contact with the spinning
14. Regularly clean the power tool’s air vents. The
15.
materials.
16. Do not use accessories that require liquid
coolants.
Kickback and Related Warnings
-
-
operator, depending on direction of the wheel’s move-
1.
position your body and arm to allow you to
resist kickback forces. Always use auxiliary
handle, if provided, for maximum control over
kickback or torque reaction during start-up.
-
2. Never place your hand near the rotating acces-
sory.
3. Do not position your body in the area where
power tool will move if kickback occurs.
to the wheel’s movement at the point of snagging.
4. Use special care when working corners, sharp
edges etc. Avoid bouncing and snagging the
accessory.
5. Do not attach a saw chain woodcarving blade
or toothed saw blade.-
1. Use only wheel types that are recommended
designed for the selected wheel. Wheels for
2. The grinding surface of centre depressed
wheels must be mounted below the plane of
the guard lip.
3. The guard must be securely attached to the
power tool and positioned for maximum safety,
so the least amount of wheel is exposed
towards the operator.
-
ignite clothing.
4. Wheels must be used only for recommended
applications. For example: do not grind with
are intended for peripheral grinding, side forces
shatter.
5.
of correct size and shape for your selected
wheel.
6. Do not use worn down wheels from larger
power tools. Wheel intended for larger power tool
1. -
sive pressure. Do not attempt to make an
excessive depth of cut. Overstressing the wheel
-
11 ENGLISH
2. Do not position your body in line with and
behind the rotating wheel. When the wheel, at
-
3. When wheel is binding or when interrupting
tool and hold the power tool motionless until
the wheel comes to a complete stop. Never
cut while the wheel is in motion otherwise
kickback may occur. Investigate and take correc-
4. Do not restart the cutting operation in the
workpiece. Let the wheel reach full speed and
carefully re-enter the cut.
the workpiece.
5. Support panels or any oversized workpiece to
minimize the risk of wheel pinching and kick-
back.
6. Use extra caution when making a “pocket cut”
into existing walls or other blind areas. The
-
1. Do not use excessively oversized sanding
disc paper. Follow manufacturers recommen-
dations, when selecting sanding paper.
Operations:
1. Be aware that wire bristles are thrown by the
brush even during ordinary operation. Do not
overstress the wires by applying excessive
load to the brush.
penetrate light clothing and/or skin.
2. If the use of a guard is recommended for wire
brushing, do not allow any interference of the
wire wheel or brush with the guard. Wire wheel
Additional Safety Warnings:
1. When using depressed centre grinding wheels,
wheels.
2. NEVER USE Stone Cup type wheels with this
grinder. This grinder is not designed for these
3. Be careful not to damage the spindle, the
lock nut. Damage to these parts could result in
wheel breakage.
4. Make sure the wheel is not contacting the
workpiece before the switch is turned on.
5. Before using the tool on an actual workpiece,
let it run for a while. Watch for vibration or
wobbling that could indicate poor installation
or a poorly balanced wheel.
6. -
form the grinding.
7. Do not leave the tool running. Operate the tool
only when hand-held.
8. Do not touch the workpiece immediately after
operation; it may be extremely hot and could
burn your skin.
Do not touch accessories immediately after
operation; it may be extremely hot and could
burn your skin.
10. Observe the instructions of the manufacturer
for correct mounting and use of wheels.
Handle and store wheels with care.
11. Do not use separate reducing bushings or
adaptors to adapt large hole abrasive wheels.
12.
13.
hole wheel, ensure that the thread in the wheel
is long enough to accept the spindle length.
14. Check that the workpiece is properly
supported.
15. Pay attention that the wheel continues to
16. If working place is extremely hot and humid,
or badly polluted by conductive dust, use a
short-circuit breaker (30 mA) to assure opera-
tor safety.
17. Do not use the tool on any materials contain-
ing asbestos.
18.
the dust collecting wheel guard required by
domestic regulation.
Cutting discs must not be subjected to any
lateral pressure.
20. Do not use cloth work gloves during operation.
21. Make sure there are no electrical cables, water
pipes, gas pipes etc. that could cause a hazard
if damaged by use of the tool.
SAVE THESE INSTRUCTIONS.
WARNING: DO NOT let comfort or familiarity
with product (gained from repeated use) replace
strict adherence to safety rules for the subject
product. MISUSE or failure to follow the safety
rules stated in this instruction manual may cause
serious personal injury.
12 ENGLISH
FUNCTIONAL
DESCRIPTION
CAUTION: Always be sure that the tool is
checking function on the tool.
CAUTION: Return the switch trigger to the
"OFF" position in case of accidental unplugging,
blackout, or the power is cut unintentionally.
Shaft lock
Press the shaft lock to prevent spindle rotation when
installing or removing accessories.
Fig.1: 1. Shaft lock
NOTICE: Never actuate the shaft lock when the
spindle is moving.
Switch handle mounting positions
CAUTION: Always make sure that the switch
handle is locked in the desired position before
operation.
position.
GA7070, GA7070Y, GA9070, GA9070Y
Fig.2: 1.2.3. Handle
GA7071, GA9071, GA9071Y
Fig.3: 1.2.3. Handle
Switch action
CAUTION: Before plugging in the tool, always
check to see that the switch trigger actuates
properly and returns to the "OFF" position when
released.
There are three patterns of the switch action depending
GA7070, GA7070Y, GA9070, GA9070Y
Fig.4: 1. Switch trigger 2.
GA7071, GA9071, GA9071Y
Fig.5: 1. Switch trigger 2.
For tool with the lock-on switch
CAUTION: Switch can be locked in "ON" posi-
tion for ease of operator comfort during extended
use. Apply caution when locking tool in "ON"
lock lever is provided.
-
Release the switch trigger to stop.
NOTICE: Do not pull the switch trigger hard
without pressing in the lock lever.
switch
CAUTION: Switch can be locked in "ON" posi-
tion for ease of operator comfort during extended
use. Apply caution when locking tool in "ON"
lock lever is provided.
-
Release the switch trigger to stop.
NOTICE: Do not pull the switch trigger hard
without pressing in the lock lever.
Indication lamp
Fig.6: 1. Indication lamp
even if the tool is switched on, the controller or the
13 ENGLISH
Unintentional restart proof
switch to OFF position.
NOTE:
Active Feedback sensing Technology
CAUTION: -
tion stops.
Soft start feature
ASSEMBLY
CAUTION: Always be sure that the tool is
any work on the tool.
Installing side grip (handle)
CAUTION: Always be sure that the side grip is
installed securely before operation.
CAUTION: You can install the side grip on the
3 holes. Install the side grip on one of the holes
according to the operation.
Fig.7
Installing or removing loop handle
Optional accessory
CAUTION: Always be sure the bolts on the
loop handle is securely tightened before use.
CAUTION: Hold the gripping area of the loop
away from the metal part of the grinder during
operation.
-
inal side grip for some applications. To install the loop
To remove the loop handle, follow the installation proce-
Fig.8: 1.2. Bolt 3. Gripping area
Installing or removing wheel guard
WARNING: When using a depressed center
the closed side of the guard always points toward
the operator.
WARNING:
/ diamond wheel, be sure to use only the special
For tool with locking screw type
wheel guard
-
that it can protect the operator according to work. Be
-
Fig.9: 1.2.3. Screw
For tool with clamp lever type wheel guard
Optional accessory
WARNING:
on the tool so that the closed side of the guard
always points toward the operator.
of the arrow.
Fig.10: 1.2.
-
that it can protect the operator according to work.
Fig.11: 1.2.
Fig.12: 1.
close the lever in direction of the arrow to fasten the
-
Fig.13: 1.2.
-
14 ENGLISH
Installing or removing depressed
Optional accessory
WARNING: When using a depressed center
on the tool so that the closed side of the guard
always points toward the operator.
CAUTION: Make sure that the mounting part
Fig.14: 1.2. Depressed center wheel
3.4.
Fig.15: 1.2. Shaft lock
Optional accessory
WARNING: Always use supplied guard when
Fig.16: 1.2. Flex wheel 3.
4.
Installing or removing Ezynut
Optional accessory
Only for tools with M14 spindle thread.
Fig.17: 1.2.3.
4. Spindle
Fig.18: 1. Shaft lock
NOTE:
Fig.19: 1. Arrow 2. Notch
Fig.20
Installing or removing abrasive disc
Optional accessory
Fig.21: 1.2.
3.
1.
2. -
3.
wrench.
reverse.
NOTE:-
Installing or removing abrasive cut-
Optional accessory
WARNING:
/ diamond wheel, be sure to use only the special
WARNING:
grinding.
Fig.22: 1.2.-
mond wheel 3.4.
For Australia and New Zealand
Fig.23: 1.2.3.
4. Inner
5.
Installing wire cup brush
Optional accessory
CAUTION: Do not use brush that is damaged,
or which is out of balance.
Fig.24: 1.
15 ENGLISH
Installing wire wheel brush
Optional accessory
CAUTION: Do not use wire wheel brush that
is damaged, or which is out of balance. Use of
CAUTION: ALWAYS use guard with wire
inside guard.
Fig.25: 1.
Installing dust collecting wheel
guard
Dust collecting wheel guard for grinding
Fig.26: 1.2.
3.4. Inner
5.
6.
WARNING: Dust collecting wheel guard for
with a cup-type diamond wheel. Do not use it with
grinding stones or for any purpose other than
mentioned.
GA9070 / GA9070Y / GA9071 / GA9071Y)
Fig.27
NOTE:-
cover.
Connecting a vacuum cleaner
Optional accessory
WARNING: Never vacuum metal particles
generated by operation. Metal particles generated
-
cleaner.
Fig.28: 1.
2.
OPERATION
WARNING: It should never be necessary to
force the tool. The weight of the tool applies ade-
WARNING: ALWAYS replace wheel if tool is
dropped while grinding.
WARNING: NEVER hit the workpiece with the
wheel.
WARNING: Avoid bouncing and snagging
the wheel, especially when working corners,
sharp edges etc.
WARNING: NEVER use tool with wood cutting
blades and other saw blades.
CAUTION: Never switch on the tool when it
is in contact with the workpiece, it may cause an
injury to operator.
CAUTION: Always wear safety goggles or a
face shield during operation.
CAUTION:
the tool and wait until the wheel has come to a
complete stop before putting the tool down.
CAUTION:
one hand on housing and the other on the side
grip (handle).
Grinding and sanding operation
Fig.29
workpiece.
In general, keep the edge of the wheel or disc at an
16 ENGLISH
diamond wheel
Optional accessory
WARNING: Do not "jam" the wheel or apply
excessive pressure. Do not attempt to make an
excessive depth of cut. Overstressing the wheel
WARNING: Do not start the cutting operation
in the workpiece. Let the wheel reach full speed
and carefully enter into the cut moving the tool
forward over the workpiece surface. The wheel
started in the workpiece.
WARNING: During cutting operations, never
change the angle of the wheel. Placing side pres-
-
WARNING: A diamond wheel shall be oper-
ated perpendicular to the material being cut.
wheel
Fig.30
Usage example: operation with diamond wheel
Fig.31
Operation with wire cup brush
Optional accessory
CAUTION: Check operation of brush by run-
ning tool with no load, insuring that no one is in
front of or in line with brush.
NOTICE: Avoid applying too much pressure
which causes over bending of wires when using
the wire cup brush.
Usage example: operation with wire cup brush
Fig.32
Operation with wire wheel brush
Optional accessory
CAUTION: Check operation of wire wheel
brush by running tool with no load, insuring that
no one is in front of or in line with the wire wheel
brush.
NOTICE: Avoid applying too much pressure
which causes over bending of wires when
using wire wheel brush.
Usage example: operation with wire wheel brush
Fig.33
MAINTENANCE
CAUTION: Always be sure that the tool is
perform inspection or maintenance.
NOTICE: Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
NOTE: Do not loosen the screw on the cover.
Fig.34: 1. Screw
Air vent cleaning
Fig.35: 1.2. Inhalation vent
Brake maintenance
for more than 6 seconds after releasing the switch
trigger.
17 ENGLISH
OPTIONAL ACCESSORIES
CAUTION: These accessories or attachments are recommended for use with your Makita tool spec-
Fig.36
-180 mm 230 mm
1
2
3
4Depressed center grinding wheel / Flap disc
5
6
7
8
10
11 Flex wheel
12
13
14
15
16
17 -
18 -
-
20 -Diamond wheel
21
22
-
-
NOTE:
NOTE:
NOTE:
NOTE:-
NOTE:
18 FRANÇAIS
FRANÇAIS (Instructions originales)
SPÉCIFICATIONS
Modèle : GA7070 /
GA7070Y
GA7071 GA9070 /
GA9070Y
GA9071 /
GA9071Y
180 mm 230 mm
7,2 mm 6,5 mm
Filetage de l’axe
8 500 min-1 6 600 min-1
506 mm
Poignée pistolet
Poids net 6,1 - 6,6 kg 6,2 - 6,7 kg 6,3 - 8,5 kg 6,4 - 8,5 kg
/II
-
Utilisations
Alimentation
Bruit
EN60745-2-3 :
Modèle GA7070, GA7070Y
pA
WA
Modèle GA7071
pA
WA
Modèle GA9070, GA9070Y
pA
WA
Modèle GA9071, GA9071Y
pA
WA
NOTE :
NOTE :
AVERTISSEMENT : Portez un serre-tête
antibruit.
AVERTISSEMENT : L’émission de bruit
lors de l’usage réel de l’outil électrique peut être
la façon dont l’outil est utilisé, particulièrement
selon le type de pièce usinée.
AVERTISSEMENT : Les mesures de sécurité
à prendre pour protéger l’utilisateur doivent être
basées sur une estimation de l’exposition dans
des conditions réelles d’utilisation (en tenant
compte de toutes les composantes du cycle
d’utilisation, comme par exemple le moment de
sa mise hors tension, lorsqu’il tourne à vide et le
moment de son déclenchement).
Vibrations
déterminée selon EN60745-2-3 :
Modèle GA7070, GA7070Y
latérale normale
h, AG2
2
h, AG2
2
latérale normale
h, DS2
2
h, DS2
2
19 FRANÇAIS
Modèle GA7071
latérale normale
h, AG2
2
h, AG2
2
latérale normale
h, DS2
2
h, DS2
2
Modèle GA9070, GA9070Y
latérale normale
h, AG2
2
h, AG2
2
latérale normale
h, DS2
2
h, DS2
2
Modèle GA9071, GA9071Y
latérale normale
h, AG2
2
h, AG2
2
latérale normale
h, DS2
2
h, DS2
2
NOTE :-
-
NOTE :-
préliminaire de l’exposition.
AVERTISSEMENT : L’émission de vibrations
lors de l’usage réel de l’outil électrique peut être
la façon dont l’outil est utilisé, particulièrement
selon le type de pièce usinée.
AVERTISSEMENT : Les mesures de sécurité
à prendre pour protéger l’utilisateur doivent être
basées sur une estimation de l’exposition dans
des conditions réelles d’utilisation (en tenant
compte de toutes les composantes du cycle
d’utilisation, comme par exemple le moment de
sa mise hors tension, lorsqu’il tourne à vide et le
moment de son déclenchement).
AVERTISSEMENT :
Déclaration de conformité CE
Pour les pays européens uniquement
CONSIGNES DE SÉCURITÉ
Consignes de sécurité générales
pour outils électriques
AVERTISSEMENT : Veuillez lire les
consignes de sécurité, instructions, illustrations
électrique.
-
Conservez toutes les mises en
garde et instructions pour réfé-
rence ultérieure.
-
Consignes de sécurité pour meuleuse
Consignes de sécurité communes aux travaux de
meulage, ponçage, brossage métallique ou tronçon-
nage abrasif :
1. Cet outil électrique est conçu pour être uti-
lisé en tant que meuleuse, ponceuse, brosse
métallique ou outil de tronçonnage. Veuillez
lire les consignes de sécurité, instructions,
-
pagnent cet outil électrique.
20 FRANÇAIS
2.
-
sage avec cet outil électrique.
-
3. N’utilisez pas d’accessoires qui n’ont pas été
fabricant de l’outil.
4. La vitesse nominale de l’accessoire doit être
au moins égale à la vitesse maximum inscrite
sur l’outil électrique.
casser et voler en éclats.
5. Le diamètre extérieur et l’épaisseur de l’ac-
cessoire ne doivent pas dépasser la capacité
nominale de l’outil électrique.
6.
correspondre à celui de l’axe de la meuleuse.
Pour les accessoires montés à l’aide de
7. N’utilisez jamais un accessoire endommagé.
Avant chaque utilisation, assurez-vous que
la meule abrasive est exempte de copeaux et
déchirée ou trop usée, ou que la brosse métal-
un accessoire, assurez-vous qu’il n’est pas
endommagé ou bien remplacez l’accessoire
accessoire, assurez-vous que personne, y
compris vous-même, ne se trouve dans la
trajectoire de l’accessoire en rotation et faites
tourner l’outil électrique à vitesse à vide maxi-
male pendant une minute.
de cette période d’essai.
8. Portez un équipement de protection indivi-
utilisez un écran facial, des lunettes à coques
ou des lunettes de sécurité. Si nécessaire,
portez un masque anti-poussière, des pro-
tège-tympans, des gants et un tablier de travail
pouvant arrêter les particules abrasives ou les
fragments de pièce.
-
-
Assurez-vous que les passants demeurent à
une distance sûre de la zone de travail. Toute
personne pénétrant dans la zone de travail
doit porter un équipement de protection indivi-
duelle.
-
10.
Tenez l’outil électrique par une surface de prise
-
d’alimentation.
11.
Placez le cordon à l’écart de l’accessoire en
rotation.
12. Ne déposez jamais l’outil électrique avant que
l’accessoire ne se soit parfaitement arrêté.
13.
Ne transportez pas l’outil électrique tout en le
laissant tourner. En cas de contact accidentel avec
14.
de l’outil électrique.
-
15. N’utilisez pas l’outil électrique près de maté-
16. N’utilisez pas d’accessoires nécessitant un
liquide de refroidissement.
Mises en garde concernant le choc en retour et
autres dangers
-
-
-
1.
Maintenez une poigne ferme sur l’outil électrique
et placez corps et bras de façon à pouvoir résis-
ter à la force exercée par les chocs en retour.
Utilisez toujours la poignée auxiliaire, s’il y en a
une, pour avoir une maîtrise maximale de l’outil
en cas de choc en retour ou de force de réaction
exercée au moment du démarrage.
2. Ne placez jamais la main près d’un accessoire
en rotation.
This manual suits for next models
10
Table of contents
Languages:
Other Makita Grinder manuals
Makita
Makita 9553NB User manual
Makita
Makita 9565CLR User manual
Makita
Makita 9558HNRGZ User manual
Makita
Makita DGA520 User manual
Makita
Makita DGA701Z User manual
Makita
Makita GA4030 User manual
Makita
Makita BGA452 User manual
Makita
Makita M9502R User manual
Makita
Makita Maktec MT904 User manual
Makita
Makita DISC GRINDER 9505BH User manual
Makita
Makita 9565CVRKD User manual
Makita
Makita 9557HNR User manual
Makita
Makita GA7021 User manual
Makita
Makita GA5020 User manual
Makita
Makita GA5020 User manual
Makita
Makita 9564P User manual
Makita
Makita GA5010 User manual
Makita
Makita GA7040S User manual
Makita
Makita GA7021 Quick start guide
Makita
Makita GA5030 User manual
Popular Grinder manuals by other brands
Craftsman
Craftsman 152.21152 owner's manual
Parkside
Parkside PWS 125 D3 Translation of the original instructions
Parkside
Parkside PWSA 20-Li D4 Translation of the original instructions
Foley
Foley 3096 Maintenance, Troubleshooting, Adjustments And Parts Lists
ENKHO
ENKHO 165770.01 Original instructions
EINHELL
EINHELL TC-AG 115/750 Original operating instructions