fantastic furniture Dawn Bedhead Queen User manual

Bedhead Queen
Version 1.0
Dawn
fantasticfurniture.com.au

fantasticfurniture.com.au Page 2Page 2
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
fantasticfurniture.com.au
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!

Assembly checklist
Useful information
Read through the instructions carefully
before you begin.
Identify and lay out all of the components
before you begin assembly.
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! Never use any glue until you are certain that the parts belong together.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used as they may not fit through a door once assembled.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
! Please see page 2 for any safety requirements or weight restrictions.
Page 3
fantasticfurniture.com.au

Leg (P2)
What you need
to assemble the product
Headboard (P1)
Parts list
Headboard (P1) ; 2 x Legs (P2) ; Hardware Pack.
Box 1 :
(H1) (H2)
fantasticfurniture.com.au Page 4
Hardware pack
Leg (P2)
(H3)
4 x Bolts 4 x Washers 1 x Allen Key

(H3)
(H1)
Attach 2 x Legs (P2) to the back of the Heaboard (P1) using 4 x Bolts (H1) and 4 x Washers (H2),
fantasticfurniture.com.au Page 5
Ensure all bolts are tightened securely.
Step 1
You will need
4 x Bolts
(H1)
4 x Washers
(H2)
(H2)
(P2)
(H3)
Allen Key
height and ensure they are even
to your desired
Adjust the legs
before securing the bolts.
tightening with the Allen Key (H3) as shown.

fantasticfurniture.com.au Page 6
Job complete!
In the interest of our environment please dispose
of all packaging thoughtfully.