Manhattan 176576 User manual

SERIAL
PC CARD
QUICK
INSTALL
GUIDE
Model 176576
MAN-176576-QIG-0707-01

INTRODUCTION
Thank you for purchasing the MANHATTAN
®
Serial PC Card, Model
176576.
The easy-to-follow instructions in this guide help make installation of
the card quick and simple, so you’ll also soon be enjoying the benets
of these features:
• Creates a DB9 com port (RS-232)
• Fast 16C550 high-performance UART chipset
• Supports data transfer rates of up to 115 kbps
• Compatible with any 32-bit PC Cardbus Type II PCMCIA slot
• Lifetime Warranty
System Requirements
• Windows 2000/XP/Server 2003/Vista
• Available PCMCIA slot
Package Contents
• Serial PC Card
• Quick install guide and driver CD
HARDWARE INSTALLATION
1. Turn off your computer and any other connected peripheral devices.
2. Insert the PC card into the PC card slot of your computer with the
card’s 68-pin connector facing the slot. Make sure it is inserted
properly for a solid connection.
3. Turn the computer on.
3 3

DRIVER INSTALLATION
Ensure that the card is installed on the computer before proceeding
with driver installation.
Windows 2000
1. At the Found New Hardware Wizard, click “Next.”
2. Select “Search for a suitable driver for my device (recommended)”;
click “Next.”
3. Check “Specify a location”; uncheck the other boxes; click “Next.”
4. Insert the driver CD; enter “D:\Cardbus\98XX\2000”; click “OK.”
NOTE: Change “D:” if/as needed to match your CD-ROM driver
designation.
5. Click “Next”; then “Finish.”
6. Restart Windows to complete the installation.
Windows XP
1. At the Found New Hardware Wizard, select “Install from a list or
specic location (Advanced)”; click “Next.”
2. Insert the driver CD; check “Include this location in the search”;
uncheck the other box; enter “D:\Cardbus\98XX\XP”; click “OK.”
NOTE: Change “D:” if/as needed to match your CD-ROM designation.
3. If the Hardware Installation window pops up, click “Continue Anyway”;
click “Finish.” (The driver has been thoroughly tested for stability and
compatibility.)
4. Repeat steps 1-3 two more times.
5. Restart Windows to complete the installation.
Windows Server 2003
1. At the Found New Hardware Wizard, select “Install from a list or
specic location (Advanced)”; click “Next.”
2. Insert the driver CD; check “Include this location in the search”;
uncheck the other box; enter “D:\Cardbus\98XX\2003”; click “OK.”
NOTE: Change “D:” if needed to match your CD-ROM designation.
44

5
3. If the Hardware Installation window pops up, click “Continue Anyway”;
click “Finish.” (The driver has been thoroughly tested for stability and
compatibility.)
4. Repeat steps 1-3 two more times.
5. Restart Windows to complete the installation.
Windows Vista
1. At the Found New Hardware Wizard, select “Locate and install driver
software (recommended).”
2. Click on “I don’t have the disc. Show me other options.”
3. Select the option “Browse my computer for driver software (advanced).”
4. Insert the driver CD; check “Include subfolders”; enter “D:\Cardbus\
98XX\Vista32”; click “Next.” NOTE: Change “D:” if/as needed to
match your CD-ROM driver designation.
5. If the system prompts you that the drivers are not signed, select the
option “Install this driver software anyway.”
6. Click “Close” to complete the driver installation.
Verify Windows Driver Installation
1. Right-click “My Computer”; click “Manage”; click “Device Manager.”
2. Click on “+” (plus sign) in front of “Ports (COM & LPT)”; one “MosChip
PCI Serial Port …” should be displayed.
3. Double-click “Multifunction adapters”; “MosChip PCI Multi-I/O
Controller” should be displayed.
Change the COM Port Address
Some serial devices need a specic COM port in order to work. If your
serial devices work properly, do not change these settings.
1. In the Device Manager window, double-click “Ports (COM & LPT)”;
then double-click the “MosChip PCI Serial Port” you want to change.
2. On the Settings tab, click “Advanced.”
3. Click the down arrow next to the “COM Port Number” box; select a
COM port that is not in use; click “OK.”
4. Click “OK”; then close the Device Manager to save the changes.
5

SPECIFICATIONS
Standards and certications
• FCC
• RoHS
• CE
• WEEE
Port specications
• External DB9 port (RS-232)
Bus specications
• Cardbus Type II
• 32 bit, 33 MHz, 3.3 V card
66

Are you completely satised with this product?
Please contact your MANHATTAN®dealer
with comments or questions.
Copyright © MANHATTAN
All products mentioned are trademarks or registered trademarks of their respective owners.
www.manhattan-products.com