Manhattan 440202 User manual

COMPUTER
SECURITY
LOCK
USER
MANUAL
Model 440202
MAN-440202-UM-0707-01

Thank you for purchasing the MANHATTAN
®
Computer Security Lock,
Model 440202. These easy-to-follow instructions help make installation
of the lock quick and simple, so you’ll also soon be enjoying the
benets of these features:
• Uses D-sub port to secure notebook and desktop computers to a
secure base
• Strong zinc alloy diecast housing and cylinder with durable nickel-
plated nish
• Stainless steel cable with clear PVC cover
• 3-digit lock offers 1,000 possible combinations
• Easy installation
• Lifetime Warranty
INSTALLATION
1. Loop the cable through or around any immovable object.
2. Use the factory-set combination code (0-0-0) or reset the code (see
section below).
3. Turn the ridged locking nut on the connecting screw so it’s nearest
the lock.
4. Align the screw with one of the D-sub port cable connector nuts
(VGA, printer, etc.).
Ridged locking nut
D-sub port cable
connector nut
Connecting screw
Combination wheels
Connecting screw

5. Turn the ridged locking nut so the screw engages with the port cable
connector nut. Be careful to not over-tighten.
6. Rotate the combination wheels to lock the device in place. (If it
doesn’t lock, repeat Steps 3 – 5.
SETTING THE COMBINATION
1. With the ridged locking wheel
in the locked position, push
the cable in toward the lock
and hold the cable in this
position while turning the
combination wheels to the
desired code.
NOTE: Be sure you record or
memorize the new code. If the
combination code is lost or
forgotten, you cannot reset
the lock.
REMOVING THE LOCK
1. Set the combination wheels to the preset code.
2. Loosen the ridged locking nut to remove the screw from the port
cable connector.

Are you completely satised with this product?
Please contact your MANHATTAN®dealer
with comments or questions.
Copyright © MANHATTAN
All products mentioned are trademarks or registered trademarks of their respective owners.
www.manhattan-products.com