Manhattan 515016 User manual

MAN-515016-UM-1106-03
FireWire 400
expressCard/34
User MaNUaL
MODEL 515016

2
Thank you for purchasing the MANHATTAN®FireWire 400 ExpressCard/34, Model 515016.
Compliant with PCI Express 1.0a and IEEE1394a specifications, this card supports FireWire
400 data transfer rates of 400, 200 and 100 Mbps and has built-in FIFOs for isochronous
transmit (2048 bytes), asynchronous transmit (2048 bytes) and receive (3072 bytes), plus
32-bit CRC generation and checking for receive/transmit packets.

3
soFtWare iNstaLLatioN
For Windows 2000
1. Insert the FireWire 400 ExpressCard/34 into an available ExpressCard slot.
2. When the wizard indicates that it found a driver for the device, click "Next."
3. The wizard will now copy the required files to the system and start the driver. After starting
the driver, the wizard will display a completion dialog. Click "Finish" to exit the wizard.
For Windows XP
1. Insert the FireWire 400 ExpressCard/34 into an available ExpressCard slot.
2. When the wizard indicates that it found a driver for the device, click "Next."
3. The wizard will now copy the required files to the system and start the driver. After starting
the driver, the wizard will display a completion dialog. Click "Finish" to exit the wizard.
Verifying Windows 2000/XP Installation
1. Right click on "My Computer," select "Properties," left click on the "Hardware" tab, then click
on the "Device Manager" button.
2. Double-click on "IEEE 1394 Bus Host Controllers." If there is no yellow "!" or "?" in front of
"Texas Instruments OHCI Compliant IEEE 1394 Host Controller," the driver has started correctly.
3. To view information about the devices attached to the controller, right click on "Devices,"
select "Properties" from the context menu, then select the tab labeled "General."

4
For Windows 98SE
1. Insert the FireWire 400 ExpressCard/34into an available ExpressCard slot.
2. The Hardware Wizard will display that it found a "Texas Instruments OHCI Compliant IEEE
1394 Host Controller." Click "Next."
3. Select "Search for the best driver for your device (Recommended)" and click "Next’."
4. Make sure that only the "CD drive" checkbox is checked and click "Next."
5. Select "Update driver (Recommended)" and "Texas Instruments OHCI Compliant IEEE 1394
Host Controller," and click "Next." Then click "Next" to continue.
6. If the prompt "Insert Disk" appears, insert the disk labeled "Windows 98 Second Edition
CD-ROM" and click "OK." Then click "Finish" to exit the wizard.
For Windows Me
1. Insert the FireWire 400 ExpressCard/34 into an available ExpressCard slot.
2. The Hardware Wizard will display that it found a "Texas Instruments OHCI Compliant IEEE
1394 Host Controller." Select "Automatic search for a better driver (Recommended)," then
click "Next."
3. The system will go through the enumeration process and install the driver. At the end of the
process, click "Finish" to complete the installation.

5
Verifying Windows 98SE/Me Installation
1. Right click on "My Computer," select "Properties," then left click on the "Device Manager" tab.
2. Double click on "IEEE 1394 Bus Host Controllers." If there is no yellow "!" or "?" in front of
"Texas Instruments OHCI Compliant IEEE 1394 Host Controller," the driver has started
correctly.
3. To view information about the devices attached to the controller, right click on "Devices,"’
select "Properties" from the context menu, then select the tab labeled "General."

6
speCiFiCatioNs
Port Specifications
• Two FireWire 400 ports; 6-pin female connector
• FireWire 400 devices data transfer rates of 400 Mbps, 200 Mbps and 100 Mbps
(IEEE 1394)
• Texas Instruments chipset
• Single 3.3 V or 1.5 V operation
• Compliant with PCI specification Rev 2.2 (32-bit, 33 MHz), IEEE1394a OHCI specifications
release 1.1 and IEEE Std. 1394a-2000
• Built-in FIFO for isochronous transmit (2048 bytes), asynchronous transmit (2048 bytes) and
receive (3072 bytes)
• 12 V / 1 A DC power jack, 1.3 mm (power adapter not included)
Bus Specifications
• PCI ExpressCard/34
• Texas Instruments chipset
• Bus speed: 2.5 Gbps
• Fully compliant with PCI Express specifications 1.0a
• 3.3 V and 1.5 V

7
System Requirements
• Windows 98/Me/2000/XP/Vista or MAC OS 10 or above
• PCI Express enabled system with an available ExpressCard slot
Package Contents
• FireWire 400 ExpressCard/34
• User manual

www.manhattan-products.com
Are you completely satisfied with this product?
Please contact your MANHATTAN®dealer with comments or questions.
Copyright © MANHATTAN
All products mentioned are trademarks or registered trademarks of their respective owners.