MANN+HUMMEL TRI-KLEEN 500 UV BR User manual

Distributed by:
TRI-DIM FILTER CORPORATION
93 Industrial Drive
Louisa, VA 23093
www.tridim.com
1-800-458-9835
SCAN ME
p/n: 2007-0566-S01
TRI-KLEEN 500UV
Quick Start Guide
Pre-Filter Check
Open compartment lid.
Pull out pre-filter.
HEPA Filter Check
Remove bottom plate.
Check wing nuts and HEPA filter.

Main Menu
•Select Fan Speed using arrows.
•Check Filter Health and Time To
Service.
•Turn UV Lamp on/off.
•Lock the screen.
•Change System Settings.
Filter Info
•Check HEPA Filter Usage since
last filter change.
•Turn on/off Audio Alerts (device
beeps if HEPA filter needs to be
changed).
•When HEPA filter change is due,
Service Filter Alert on start screen
appears.
Support
•Refer to User Manual for detailed
information on TRI-KLEEN 500UV.
•Scan QR Code on backside of this
Quick Start Guide.
•Call Customer Service.
System Settings Menu
•Filter Info with usage percentage.
•Calibrate TRI-KLEEN 500UV after
HEPA filter change.
•Choose to Change PIN.
•Disable PIN and lock screen.
•Contact options for Support.
Default PIN
•Touch anywhere on the screen to
bring up the PIN Entry Screen.
•Type in the default PIN: 0000.
Before plugging device in
•Check that both HEPA filter and
MERV8 pre-filter are Installed And
Undamaged.
•Inspect And Tighten both HEPA
filter retaining wing nuts that may
have loosened during
transportation.
Start Screen
•Once TRI-KLEEN 500UV is
plugged in, the touchscreen will
automatically turn on.
•The Start Screen will appear.
1.
3.
2.
4.
5. 5.2
5.1