Mantra Mensa mTerminal100 User manual

Instruction Manual
Precautions
Operating & Handling Instructions
1. Do not attempt to disassemble the Sensor.
2. There are no user Serviceable parts inside.
3. Do not expose or operate the Sensor to rain or moisture.
5. Do not operate the sensor beyond its operating Temperature & operating Humidity.
6. Do not place the device beyond to heating elements.
7. Do not place magnet near to device while operating.
4. Do not clean the sensor with strong chemicals or acids.
8. Do not operate the sensor beyond its operating Voltage.
9. Do not drop the device or submit it to sudden impact or mechanical stresses.
10. Do not remove the device label or warranty seal.
4. Disconnect the sensor from your desktop/Tablet/Mobile when not operating.
7. Install the driver as per driver installation guide; if the sensor does not work make
1. Handle the sensor with proper care to avoid damage of the sensor.
6. Use only the USB Cable provided & don’t attempt to replace it.
sure the sensor is detected as Mantra IRIS Sensor in the device manager as shown
2. Clean the glass portion of the sensor with the cleaning cloth provided or use special
below. If the sensor is not detected, please Re-install the drivers for proper
3. Store the sensor in a cool & dry place when not in use.
support person for assistance.
functioning of the sensor. In case of further problem please contact your technical
optical cloth in order to clean the glass area.
5. Operate the sensor within the operating limits specified.
Download Drivers & SDK
On call support & Service
Support / Service Email
[email protected]
http://download.mantratecapp.com
Cell: 079-49068000 (Press 1 for support Services )
Any damage to the device caused by the user will void
the warranty.
Specification
Published by Mantra Softech india Pvt Ltd., B203, Shapath Hexa, SG Highway, Sola, Ahmedabad - 380060, Gujarat, Phone: [phone], For more details visit www.mantratec.com
CANTEEN MANAGEMENT
HARDWARE
Manage your Canteen Operaons with Mantra's
Biometric POS Machine and Applicaon
RMA Support
(Time : 09 : 00 AM TO 09 : 00 PM )

How to Start Process
Product introduction
8 LCD Touch Screen3 Receipt
1 Charging Point
4 Bill Printer 9 SAM Card Slot
10 Dual SIM Slot5 Camera
6 Fingerprint Scanner
7 QR Code Scanner2 On/Off Button
Press the Power Buttton
Connect Charger for Power
Open Printer Lid
Insert Printer Role
Close Printer Lid
Connectivity Options
Step 2. Search for the setting gear Icon and click to enter
Step 7. Enter the password to connect with the wi-fi.
Step 5. Click the toggle to enable
Step 4. Click wi-fi
Step 3. Click on Network and Internet
Step 6. Select the wi-fi network
Step 1. Swipe up at the home screen to see all applications
Wi-fi Connect
Step 1. Swipe up at the home screen to see all applications
Step 3. click on Network and Internet
Step 2. Search for the setting gear Icon and click to enter
Step 5. Under the preference, section select the data option for Step
Step 4. click on SIM card
enabling or disabling the SIM card 4G or 3G data
Connect Network and Internet
What’s in the box?
POS Device Power Charger Instruction Manual Hardware App Manual
Web App Manual Web App Flow chart User App chart Software CD
mensa