Marantz SACD 30n User manual

Marantz 30 Classical Favorites
Brandenbrg Concerto No.
1 :10 9:20
QUICK START GUIDE
Network SACD Player
1.SACD 30n U_ENG_QSG_200526.indd 11.SACD 30n U_ENG_QSG_200526.indd 1 2020/06/02 17:01:552020/06/02 17:01:55
PrintingColor:Black

1
Thank you for choosing a Marantz network SACD player. This guide
provides step-by-step instructions for setting up your network
SACD player.
Welcome Before You Begin
What’s In the Box
Quick Start Guide
Remote
control unit
(RC002PMND)
Safety
Instructions
R03/AAA
batteries
Notes on radio Audio cable
Warranty
(for USA/for
CANADA)
Remote
connector cable
Network SACD
Player
External antennas
for Bluetooth/
wireless
connectivity
Power cord
1.SACD 30n U_ENG_QSG_200526.indd 11.SACD 30n U_ENG_QSG_200526.indd 1 2020/06/02 17:01:572020/06/02 17:01:57
PrintingColor:Black

2
EN
FR
ES
Optional
Computer USB cable Mobile device
The external antennas are required for both Bluetooth and
Wireless network connectivity. Please make sure to connect
the antennas before attempting to use the Bluetooth or Wi-Fi
features of the SACD 30n.
Connect the external antennas
for Bluetooth/Wireless connectivity
For each of the two antennas:
qPlace the antenna evenly over the antenna terminal located at
the upper left or right corner of the rear panel.
wTurn the antenna clockwise until it is fully connected. Do not
over tighten.
eRotate the antenna upwards for the best possible reception.
Required for Setup
Amplier Speaker
systems Speaker cables
Wi-Fi Router LAN cable
These drawings are for illustrative purposes only and may not
represent the actual product(s).
Important: External Antennas
q w e
or
1.SACD 30n U_ENG_QSG_200526.indd 21.SACD 30n U_ENG_QSG_200526.indd 2 2020/06/02 17:01:572020/06/02 17:01:57
PrintingColor:Black

3
There are seven steps to the setup
process.
Setup
Install batteries in the remote control unit
Connect this unit to the amplier
Plug the power cord into a power outlet
Connect this unit to the network
Enjoy your music
Enjoy your music using the HEOS App
Listen to computer audio via USB-DAC
1) Install the Windows driver software
2) Connect to PC or Mac
3) Listen to audio from PC or Mac
Batteries
Install batteries
in the remote control unit
1.SACD 30n U_ENG_QSG_200526.indd 31.SACD 30n U_ENG_QSG_200526.indd 3 2020/06/02 17:01:582020/06/02 17:01:58
PrintingColor:Black

4
EN
FR
ES
AUDIO
LR
IN
RL
RL
Amplier
SACD 30n
Power cord
(supplied)
Connect to household
power outlet
(AC 120 V, 60 Hz)
Connect this unit to the amplier Plug the power cord
into a power outlet
1.SACD 30n U_ENG_QSG_200526.indd 41.SACD 30n U_ENG_QSG_200526.indd 4 2020/06/02 17:01:582020/06/02 17:01:58
PrintingColor:Black

5
Choose from one of the following options.
Wireless
Select “WPS Router”.
WPS router
Wi-Fi router
Select “Wi-Fi - scan” and wait
as your SACD 30n looks for
available networks.
No WPS router
Wi-Fi router
Select language.
(After selecting a language, please
be patient while the network settings
initialize. Expect to wait a few minutes.)
English
Select Language
:
enter
ENTER
Wi-Fi - scan
Select Connection Method
:
cancel
:
enter
ENTER BACK
iOS device
iOS version 7
or later
Make sure your iOS device is
connected to your Wi-Fi Network.
Select the network named “Marantz
SACD30n” from the Settings/Wi-Fi
screen on your device.
2 3
3
3
WPS Router
Select Connection Method
:
cancel
:
enter
ENTER BACK
Power on.
1
Power on.
1
Power on.
1
WPS
iOS
Select language.
(After selecting a language, please
be patient while the network settings
initialize. Expect to wait a few minutes.)
English
Select Language
:
enter
ENTER
2
WPS
iOS
Select language.
(After selecting a language, please
be patient while the network settings
initialize. Expect to wait a few minutes.)
English
Select Language
:
enter
ENTER
2
WPS
iOS
WAC - use your Apple
Select Connection Method
:
cancel
BACK
:
enter
ENTER
Marantz SACD30n
Marantz SACD30n
WPS
iOS
WPS
iOS
Connect this unit to the network
1.SACD 30n U_ENG_QSG_200526.indd 51.SACD 30n U_ENG_QSG_200526.indd 5 2020/06/02 17:02:002020/06/02 17:02:00
PrintingColor:Black

6
EN
FR
ES
Select language.
Please wait as completing
the connection can take a
few minutes.
(The front panel of the SACD 30n will
show the status of the connection.)
Press the WPS button on your router.
Within 2 minutes, press the
ENTER button.
Connect a network cable
between your SACD 30n and
your router.
(cable not included)
Power on.
Please wait while your SACD 30n
connects to your wired network.
Select your network name.
(If your network name is not listed,
select “Rescan”.)
Enter your network
password using the
number keys on the
remote control.
Network name
Select Network
:
back
:
enter
ENTER BACK
Enter Wi-Fi Password
:
a
:
character type
a/A 0～９
Please wait as completing...
Quick Setup
Wired
Follow the instructions
and tap Next.
Please wait as completing
the connection can take a
few minutes.
(The front panel of the SACD 30n will
show the status of the connection.)
Sharing the network...
Quick Setup
3
21
4
4
4
4
5
5
5
NETWORK
Press the WPS button...
Quick Setup
:
back
:
connect
ENTER BACK
Press the ENTER button.
Access Point 1
Wi-Fi Connected
:
back
:
next
ENTER BACK
If the signal strength of
your wireless network is
weak, to improve reception,
please turn the antenna on
the back of your SACD 30n
or move your router to the
SACD 30n.
Wi-Fi
Connected !
Connected !
Marantz SACD30n
Marantz SACD30n
1.SACD 30n U_ENG_QSG_200526.indd 61.SACD 30n U_ENG_QSG_200526.indd 6 2020/06/02 17:02:012020/06/02 17:02:01
PrintingColor:Black

7
Auto-Update
Setting
Usage Data
Setting
Setup
Complete !
Turns on Auto-Update so
that future updates are
automatically downloaded and
installed when your SACD 30n
is in standby mode.
1
Select “On” to turn on Auto-Update.
Select “O” to turn o Auto-Update.
Sets the time zone that matches
the area where you live.
2
To help us improve our products
and customer service, Marantz
collects anonymous information
about how you use your SACD
30n. Marantz will never provide
any information we collect to
third parties.
Select “Yes” to provide
information on the operating
status of this unit.
Select “No” to not provide
information on the operating
status of this unit.
:
cancel
BACK
:
enter
ENTER
Eastern Standard Tim...
Select your time zone
Off
Auto-Update
Feature updates are not automatically...
On
Auto-Update
Feature updates are automatically do...
Yes
Send usage data
To help us improve our products and...
No
Send usage data
To help us improve our products and...
1.SACD 30n U_ENG_QSG_200526.indd 71.SACD 30n U_ENG_QSG_200526.indd 7 2020/06/02 17:02:012020/06/02 17:02:01
PrintingColor:Black

8
EN
FR
ES
11
22
33
Enjoy your music
Press INTERNET RADIO.
Select “Marantz SACD30n” from
the AirPlay Device list.
Select the station you want to
play, then press ENTER.
Open Control Center then tap the
AirPlay icon in the audio card.
Select “Play Now”, then press
ENTER.
Choose music to play from your
iPhone, iPod touch, or iPad.
Enjoy Internet Radio Enjoy music using Apple AirPlay
Marantz SACD30n
You can also AirPlay audio from an app you're using on your iOS
device. Just open the app, tap the AirPlay icon, then tap a speaker or
tap multiple speakers.
1.SACD 30n U_ENG_QSG_200526.indd 81.SACD 30n U_ENG_QSG_200526.indd 8 2020/06/02 17:02:012020/06/02 17:02:01
PrintingColor:Black

9
Bluetooth ON
Marantz SACD30n
Bluetooth
Press Bluetooth to select Bluetooth.
When using for the  rst time, the unit will
go into the pairing mode automatically
and “Bluetooth Pairing Mode” will appear
on the display of the unit.
Turn on Bluetooth fr...
Bluetooth Pairing Mode
:
cancel
BACK
Activate Bluetooth on your
mobile device.
Bluetooth ON
Select “Marantz SACD30n”
from the Bluetooth device list
on your mobile device.
Play music using any app on
your device.
To pair with other Bluetooth devices, press and hold Bluetooth on the
remote control until “Bluetooth Pairing Mode” is displayed on the unit.
Enjoy music using Bluetooth
1
2
3
4
1.SACD 30n U_ENG_QSG_200526.indd 91.SACD 30n U_ENG_QSG_200526.indd 9 2020/06/02 17:02:022020/06/02 17:02:02
PrintingColor:Black

10
EN
FR
ES
The HEOS App lets you control your SACD 30n
e ortlessly to explore, browse, and play music from
many online streaming services or from your own
music library.
Create a HEOS account or sign in using
your HEOS account.
q Tap “Music” in the navigation tab.
w Select the Settings icon in the upper
left corner of the screen.
e Select “HEOS Account”.
Select “Marantz SACD30n” from the
“Rooms” list.
Tap “Rooms” in the navigation tab.
1
2
4
3
Enjoy your music using the HEOS App
To control the SACD 30n with HEOS App, your device must be connected to
the same network. Refer to instructions on Step 4 “Connect this unit to the
network” to connect your device to a network.
Download and open the HEOS App.
Scan the QR code and download the HEOS App on your mobile
device. Then open the HEOS App.
Now Playing
MusicRooms
This Phone
Music
Music Servers USB Music
Playlists History
Marantz SACD30n
NOTE
1.SACD 30n U_ENG_QSG_200526.indd 101.SACD 30n U_ENG_QSG_200526.indd 10 2020/06/02 17:02:032020/06/02 17:02:03
PrintingColor:Black

11
Sync services on the “Music”
Screen.
Sign in to your favorite online
streaming services or choose from
your own music library to sync
music to your HEOS account.
Play your music and enjoy.
5
6
1.SACD 30n U_ENG_QSG_200526.indd 111.SACD 30n U_ENG_QSG_200526.indd 11 2020/06/02 17:02:032020/06/02 17:02:03
PrintingColor:Black

12
EN
FR
ES
Install the Windows driver software
Windows OS
System requirements：Windows 8.1 or Windows 10
Listen to computer audio via
USB-DAC
Download the dedicated driver from the “Download” section
of the SACD 30n page of the Marantz website (http://www.
marantz.com/pages/home.aspx) onto your PC.
Install the driver.
qSelect the language to use for the installation.
w Click “OK”.
eThe wizard menu is displayed. Follow the instructions
on the screen.
rWhen the wizard is completed, click “Yes”.
Unzip the downloaded  le, and double-click the exe  le.
1
3
2
q
w
Please see the FAQ at www.marantz.com if you experience any
issues getting audio to play from your computer through the
SACD 30n. You may also want to check the support pages for
audio player application.
r
The installation of the driver software is not necessary in the following cases.
• When you do not play back the music from a PC using USB-DAC of this unit.
• When using a macOS.
The driver software cannot be installed correctly if your PC is connected to
the unit by a USB cable. If the unit and your computer are connected by a USB
cable and the computer is switched on before installation, disconnect the USB
and restart the computer.
NOTE
NOTE
1
1.SACD 30n U_ENG_QSG_200526.indd 121.SACD 30n U_ENG_QSG_200526.indd 12 2020/06/02 17:02:042020/06/02 17:02:04
PrintingColor:Black

13
Listen to audio from PC or Mac
Power on.
Press USB-DAC to switch the
input source to “USB-DAC”.
Set the audio signal destination to this unit on the computer.
1
2
3
Windows OS
qClick the “Start” button and click “Control Panel” on the PC.
• The control panel setting list is displayed.
wClick the “Sound” icon.
• The sound menu window is displayed.
3
Computer on which
the driver software
and audio player
software are installed
Type A
USB 2.0 cable
(Sold separately)
Type B
Connect to PC or Mac
2
1.SACD 30n U_ENG_QSG_200526.indd 131.SACD 30n U_ENG_QSG_200526.indd 13 2020/06/02 17:02:042020/06/02 17:02:04
PrintingColor:Black

14
EN
FR
ES
eCheck that there is a checkmark next to “Default Device”
under in “SACD 30n” of the “Playback” tab.
• When there is a checkmark for a di erent device, click
“SACD 30n” and “Set Default”.
rSelect “SACD 30n” and click “Properties”.
• The SACD 30n Properties window is displayed.
SACD 30n
r
t
i
y
u
tClick the “Advanced” tab.
ySelect the sampling rate and bit rate to be applied to the
D/A converter.
• It is recommended that “2 channel, 32 bit, 192000 Hz
(Studio Quality)” is selected.
uClick “Apply”.
iClick “Test”.
• Check that audio from this unit is output from the PC.
1.SACD 30n U_ENG_QSG_200526.indd 141.SACD 30n U_ENG_QSG_200526.indd 14 2020/06/02 17:02:042020/06/02 17:02:04
PrintingColor:Black

15
rSelect the “SACD 30n” format.
• It is normally recommended to set the format to “384000.0 Hz”
and “2ch-32 bit Interger”.
tQuit Audio MIDI Setup.
SACD 30n
SACD 30n
r
SACD 30n
SACD 30n
e
System requirements: macOS 10.13, 10.14 and 10.15
qMove the cursor to “Go” on the computer screen, and
then click “Utilities”.
• The utility list is displayed.
wDouble-click “Audio MIDI Setup”.
• The “Audio Devices” window is displayed.
eCheck that “Use this device for sound output” is checked
in “SACD 30n”.
• If a di erent device is checked, select and “Secondary click”
on “SACD 30n”, and then select “Use this device for sound
output”.
macOS
1.SACD 30n U_ENG_QSG_200526.indd 151.SACD 30n U_ENG_QSG_200526.indd 15 2020/06/02 17:02:042020/06/02 17:02:04
PrintingColor:Black

16
EN
FR
ES
Online Manual
Additional settings to output audio to the SACD 30n may have to be selected
in your advanced audio player application. Please refer to the user’s manual
for your application.
NOTE
Use your favorite music applications on your PC/Mac to play
audio through the SACD 30n.
For high resolution audio playback you will need to obtain an
advanced audio player software such as JRiver Media Center or
Audirvana.
4
Owner’s Manual
• Refer to the Online Manual for other functions information and
operation procedure details.
manuals.marantz.com/SACD30n/NA/EN/
• For more information, visit www.marantz.com
1.SACD 30n U_ENG_QSG_200526.indd 161.SACD 30n U_ENG_QSG_200526.indd 16 2020/06/02 17:02:042020/06/02 17:02:04
PrintingColor:Black

Printed in Japan 5411 11848 00AM
© 2020 Sound United. All Rights Reserved.
4.SACD 30nU_QSG_BackPage_200616.indd 34.SACD 30nU_QSG_BackPage_200616.indd 3 2020/06/16 16:49:542020/06/16 16:49:54
PrintingColor:Black