Marantz ZC4001 User manual

Model ZC4001 User Guide
Audio Client
ZC4001NDFU00cover 06.3.30, 9:22 AMPage 5 AdobePageMaker6.5J/PPC

ENGLISH
WARRANTY
For warranty information, contact your local Marantz
distributor.
RETAIN YOUR PURCHASE RECEIPT
Your purchase receipt is your permanent record of a
valuable purchase. It should be kept in a safe place to
be referred to as necessary for insurance purposes
or when corresponding with Marantz.
IMPORTANT
When seeking warranty service, it is the responsibility
of the consumer to establish proof and date of
purchase. Your purchase receipt or invoice is
adequate for such proof.
FOR U.K. ONLY
This undertaking is in addition to a consumer's
statutory rights and does not affect those rights in
any way.
FRANÇAIS
GARANTIE
Pour des informations sur la garantie, contacter le
distributeur local Marantz.
CONSERVER L'ATTESTATION D'ACHAT
L'attestation d'achat est la preuve permanente
d'un achat de valeur. La conserver en lieu sur pour
s'y reporter aux fins d'obtention d'une couverture
d'assurance ou dans le cadre de correspondances
avec Marantz.
IMPORTANT
Pour l'obtention d'un service couvert par la
garantie, il incombe au client d'établir la preuve de
l'achat et d'en corroborer la date. Le reçu ou la
facture constituent des preuves suffisantes.
DEUTSCH
GARANTIE
Bei Garantiefragen wenden Sie sich bitte an Ihren
Marantz-Händler.
HEBEN SIE IHRE QUITTING GUT AUF
Die Quittung dient Ihnen als bleibende Unterlage
für Ihren wertvollen Einkauf Das Aufbewahren der
Quittung ist wichtig, da die darin enthaltenen
Angaben für Versicherungswecke oder bei
Korrespondenz mit Marantz angeführt werden
müssen.
WICHTIG!
Bei Garantiefragen muß der Kunde eine
Kaufunterlage mit Kaufdatum vorlegen. Ihren
Quittung oder Rechnung ist als Unterlage
ausreichend.
NEDERLANDS
GARANTIE
Voor inlichtingen omtrent garantie dient u zich tot
uw plaatselijke Marantz.
UW KWITANTIE, KASSABON E.D. BEWAREN
Uw kwitantie, kassabon e.d. vormen uw bewijs van
aankoop van een waardevol artikel en dienen op
een veilige plaats bewaard te worden voor evt,
verwijzing bijv, in verbend met verzekering of bij
correspondentie met Marantz.
BELANGRIJK
Bij een evt, beroep op de garantie is het de
verantwoordelijkheid van de consument een
gedateerd bewijs van aankoop te tonen. Uw
kassabon of factuurzijn voldoende bewijs.
ESPAÑOL
GARANTIA
Para obtener información acerca de la garantia
póngase en contacto con su distribuidor Marantz.
GUARDE SU RECIBO DE COMPRA
Su recibo de compra es su prueba permanente de
haber adquirido un aparato de valor, Este recibo
deberá guardarlo en un lugar seguro y utilizarlo
como referencia cuando tenga que hacer uso del
seguro o se ponga en contacto con Marantz.
IMPORTANTE
Cuando solicite el servicio otorgado por la garantia
el usuario tiene la responsabilidad de demonstrar
cuándo efectuó la compra. En este caso, su recibo
de compra será la prueba apropiada.
ITALIANO
GARANZIA
L’apparecchio è coperto da una garanzia di buon
funzionamento della durata di un anno, o del
periodo previsto dalla legge, a partire dalla data di
acquisto comprovata da un documento attestante
il nominativo del Rivenditore e la data di vendita.
La garanzia sarà prestata con la sostituzione o la
riparazione gratuita delle parti difettose.
Non sono coperti da garanzia difetti derivanti da
uso improprio, errata installazione, manutenzione
effettuata da personale non autorizzato o,
comunque, da circostanze che non possano
riferirsi a difetti di funzionamento dell’apparecchio.
Sono inoltre esclusi dalla garanzia gli interventi
inerenti l’installazione e l’allacciamento agli
impianti di alimentazione.
Gli apparecchi verranno riparati presso i nostri
Centri di Assistenza Autorizzati. Le spese ed i
rischi di trasporto sono a carico del cliente.
La casa costruttrice declina ogni responsabilità per
danni diretti o indiretti provocati dalla inosservanza
delle prescrizioni di installazione, uso e manutenzione
dettagliate nel presente manuale o per guasti dovuti
ad uso continuato a fini professionali.
SVENSKA
GARANTI
För information om garantin, kontakta Marantz
lokalagent.
SPAR KVITTOT
Kvittot är ett inköpsbevis på en värdefull vara. Det
skall förvaras säkert och hänvisas till vid
försäkringsfall eller vidkorrespondens mod
Marantz.
VIKTIGT
Fö att garantin skall gälla är det kundens sak att
framställa bevis och datum om köpet. Kvitto eller
faktura är tillräokligt bevis fö detta.
ZC4001NDFU00cover 06.3.30, 9:22 AMPage 1 AdobePageMaker6.5J/PPC

CE MARKING
English
The ZC4001 is in conformity with the EMC directive and low-voltage directive.
Français
Le ZC4001 est conforme àla directive EMC et àla directive sur les basses tensions.
Deutsch
Das Modell ZC4001 entspricht den EMC-Richtlinien und den Richtlinien für
Niederspannungsgeräte.
Nederlands
De ZC4001 voldoet aan de EMC eisen en de vereisten voor laag-voltage.
Español
El ZC4001 estáde acuerdo con las normas EMC y las relacionadas con baja tensión.
Italiano
Il ZC4001 èconforme alle direttive CEE ed a quelle per i bassi voltaggi.
Svenska
ZC4001 är tillverkad i enlighet med EMC direktiven och direktiven för lågvoltsutrusning.
English
WARNINGS
- Do not expose the equipment to rain or moisture.
- Do not remove the cover from the equipment.
-
Do not insert anything into the equipment through
the ventilation holes.
- Do not handle the mains cord with wet hands.
- Do not cover the ventilation with any items such as
tablecloths, newspapers, curtains, etc.
- No naked flame sources, such as lighted candles,
should be placed on the equipment.
- When disposing of used batteries, please comply
with governmental regulations or environmental
public instruction’s rules that apply in your
country or area.
- Make a space of about 0.2 meter around the unit.
- No objects filled with liquids, such as vases, shall
be placed on the equipment.
- When the switch is in the OFF position, the
equipment is not completely switched off from
MAINS.
- The equipment shall be installed near the power
supply so that the power supply is easily
accessible.
Français
AVERTISSEMENTS
- Ne pas exposer l’appareil àla pluie ni àl’humi-
dité.
- Ne pas essayer de retirer le boîtier de l’appareil.
- Ne rien insérer dans l’appareil par les orifices de
ventilation.
- Ne pas manipuler le cordon d’alimentation avec
les mains mouillées.
- Ne pas recouvrir les ouïes de ventilation avec un
objet quelconque comme une nappe, un journal,
un rideau, etc.
- Ne placer aucune source de flamme nue,
comme une bougie allumée, sur l'appareil.
- Pour mettre au rebut les piles usées, respecter
les lois gouvernementales ou les règlements
officiels concernant l’environnement qui
s'appliquent àvotre pays ou région.
- Veiller àce qu’aucun objet ne soit àmoins de
0,2 mètre des côtés de l'appareil.
- Aucun objet rempli de liquide, un vase par
exemple, ne doit être placésur l'appareil.
- Lorsque l'interrupteur est sur la position OFF,
l'appareil n'est pas complètement déconnecté
du SECTEUR (MAINS).
- L'appareil sera installéprès de la source
d'alimentation, de sorte que cette dernière soit
facilement accessible.
Deutsch
WARNHINWEISE
- Das Gerät nicht Regen oder Feuchtigkeit
aussetzen.
- Die Abdeckung nicht vom Gerät abnehmen.
- Keine Gegenstände durch die
Belüftungsschlitze stecken.
- Das Netzkabel nicht mit feuchten oder nassen
Händen anfassen.
-
Decken Sie die Lüftungsöffnungen nicht mit einem
Tischtuch, einer Zeitung, einem Vorhang usw. ab.
- Es dürfen keine Gegenstände mit offener
Flamme, wie etwa brennende Kerzen, auf dem
Gerät aufgestellt werden.
- Beachten Sie bei der Entsorgung der
verbrauchten Batterien alle geltenden lokalen
und überregionalen Regelungen.
- Auf allen Geräteseiten mußein Zwischenraum
von ungefähr 0,2 meter vorhanden sein.
- Auf das Gerät dürfen keine mit Flüssigkeiten
gefüllte Behälter, wie etwa eine Vase, gestellt
werden.
- Wenn der Schalter ausgeschaltet ist (OFF-
Position), ist das Gerät nicht vollständig vom
Stromnetz (MAINS) abgetrennt.
-
Das Gerät sollte in der Nähe einer Netzsteckdose
aufgestellt werden, damit es leicht an das
Stromnetz angeschlossen werden kann.
Nederlands
WAARSCHUWINGEN
- Stel het apparaat niet bloot aan regen of vocht.
- Verwijder de afdekplaat van het apparaat niet.
- Duw niets door de ventilatieopeningen in het
apparaat.
- Raak het netsnoer niet met natte handen aan.
- Bedek de ventilatieopeningen niet met enige
voorwerpen, zoals tafelkleden, kranten,
gordijnen, enz.
- Plaats geen brandende voorwerpen, zoals
kaarsen, op het apparaat.
- Volg bij het weggooien van verbruikte batterijen
de overheidswetgeving of milieuvoorschriften op
die van kracht zijn in het land of de regio waarin
u zich bevindt.
-
Zorg dat er 0,2 meter vrije ruimte rond het toestel is.
- Plaats geen voorwerpen met een vloeistof erin,
zoals een bloemenvaas, op het apparaat.
- Als de schakelaar op OFF staat, is het apparaat
niet volledig losgekoppeld van de netspanning
(MAINS).
- De apparatuur wordt in de buurt van het
stopcontact geïnstalleerd, zodat dit altijd
gemakkelijk toegankelijk is.
ZC4001NDFU00cover 06.3.30, 9:22 AMPage 2 AdobePageMaker6.5J/PPC

Español
ADVERTENCIAS
-
No exponga el equipo a la lluvia ni a la humedad.
- No extraiga la tapa del equipo.
- No introduzca nada en el interior del equipo a
través de los orificios de ventilación.
- No maneje el cable de alimentación con las
manos mojadas.
- No cubra la ventilación con objetos como man-
teles, periódicos, cortinas, etc.
- No deben colocarse sobre el equipo elementos
con fuego, por ejemplo velas encendidas.
- Cuando se eliminen baterías usadas, deben
cumplirse las reglamentaciones oficiales o las
normas de protección medioambiental aplica-
bles en su país o en su zona.
- Deje un espacio de unos 0,2 metro alrededor de
la unidad.
-
No se deben colocar sobre el aparato recipientes
que contengan líquidos, como por ejemplo
jarrones.
- Cuando el interruptor estáen la posición OFF, el
equipo no estácompletamente desconectado
de la alimentación MAINS.
- El equipo se instalarácerca de la fuente de
alimentación de manera que resulte fácil
acceder a ella.
Italiano
AVVERTENZE
- Non esporre l’apparecchio alla pioggia o all’umi-
dità.
- Non rimuovere il coperchio dell’apparecchio.
- Non introdurre oggetti all’interno dell’apparec-
chio attraverso i fori di ventilazione.
- Non toccare il cavo di alimentazione con le mani
bagnate.
- Non coprire le fessure di ventilazione con
tovaglie, giornali, tende od oggetti analoghi.
- Non posare sull'apparecchio sorgenti di fiamme
scoperte quali candele accese.
- Smaltire le pile usate in conformitàalle norme
governative o disposizioni ambientali vigenti nel
proprio paese o zona.
- Lasciare 0,2 metro liberi tutto intorno l'unità.
-
Non mettere sull'apparecchiatura alcun
contenitore di liquido, come ad esempio dei vasi.
- Quando l'interruttore ènella posizione OFF,
l'apparecchiatura non ècompletamente
scollegata da MAINS.
-L’apparecchio va installato in prossimitàdella
fonte di alimentazione, in modo che quest’ultima
sia facilmente accessibile.
Svenska
VARNINGAR
- Utsätt inte utrustningen för regn eller fukt.
- Ta inte bort utrustningens hölje.
-
För inte in föremål i utrustningen genom ventilations-
hålen.
- Hantera inte nätsladden med våta händer.
-Täck inte för ventilationsöppningarna med några
föremål som till exempel bordsdukar, dagstid-
ningar, gardiner e.d.
- Inga föremål med öppen låga, som till exempel
tända stearinljus, bör placeras påutrustningen.
-Följ de lagar och miljöskyddsråd som gäller i det
land eller område där du bor när du gör dig av
med batterier.
- Se till att det finns omkring 0,2 meter fri plats
runt omkring enheten.
- Inga objekt som är fyllda med någon vätska, till
exempel blomstervaser, bör placeras på
apparaten.
-Även om strömbrytaren står i det avstängda
läget OFF, såär utrustningen inte helt
bortkopplad från det elektriska nätet (MAINS).
-
Utrustningen ska vara installerad nära strömuttaget
såatt strömförsörjningen är lätt att tillgå.
ZC4001NDFU00cover 06.3.30, 9:22 AMPage 3 AdobePageMaker6.5J/PPC

ENGLISH
1
CAUTIONS ON INSTALLATION
For heat dispersal, leave at least 20 cm/8 inch of
space between the top, back and sides of this unit
and the wall or other components.
• Do not obstruct the ventilation holes.
TABLE OF CONTENTS
INTRODUCTION .................................. 1
PRECAUTIONS ................................... 1
DESCRIPTION..................................... 1
FEATURES .......................................... 2
FRONT PANEL .................................... 3
FL DISPLAY AND INDICATOR ......................................... 3
TOP PANEL ......................................... 3
REAR PANEL ...................................... 4
REMOTE CONTROL OPERATION ..... 4
CONNECTIONS................................... 5
SETUP ................................................. 6
PLC SETTING ................................................................... 6
SLEEP TIMER SETTING .................................................. 7
BASS BOOST SETTING ................................................... 7
SOUND EFFECT SETTING .............................................. 7
DISPLAY DIMMER SETTING ........................................... 7
CLOCK SETTING ............................................................. 8
STANDBY MODE SETTING ............................................. 8
BASIC OPERATION ............................ 9
TROUBLESHOOTING ....................... 10
TECHNICAL SPECIFICATIONS ....... 10
DIMENSIONS .................................... 10
0.2 m
0.2 m 0.2 m
0.2 m
FOREWORD
This section must be read before any connection is
made to the mains supply.
EQUIPMENT MAINS WORKING
SETTING
Your Marantz product has been prepared to
comply with the household power and safety
requirements that exist in your area.
ZC4001 can be powered by 230V AC only.
COPYRIGHT
Recording and playback of any material may
require consent. For further information refer to the
following:
—Copyright Act 1956
—Dramatic and Musical Performers Act 1958
—Performers Protection Acts 1963 and 1972
—Any subsequent statutory enactments and
orders
INTRODUCTION
Thank you for purchasing the Marantz ZC4001
Audio Client.
This remarkable component has been engineered
to provide you with many years of home theater
enjoyment. Please take a few minutes to read this
manual thoroughly before you connect and
operate the ZC4001.
As there are a number of connection and
configuration options, you are encouraged to
discuss your own particular home theater setup
with your Marantz A/V specialist dealer.
A NOTE ABOUT
RECYCLING
This product’s packaging materials are recyclable
and can be reused. This product and the
accessories packed together are the applicable
product to the WEEE directive except batteries.
Please dispose of any materials in accordance
with your local recycling regulations.
When discarding the unit, comply with your local
rules or regulations.
Batteries should never be thrown away or
incinerated but disposed of in accordance with your
local regulations concerning chemical wastes.
DESCRIPTION
SRS WOW Audio Effect creates a panoramic
stereo audio image by producing deep and rich
bass tones and clear treble tones, enabling you to
enjoy powerful sound.
WOW, SRS and symbol are trademarks of
SRS Labs, Inc.
WOW technology is incorporated under license
from SRS Labs, Inc.
ZC4001NDFU01ENG 06.3.30, 9:22 AMPage 1 AdobePageMaker6.5J/PPC

ENGLISH
2
FEATURES
By simply plugging the power cables of the ZC4001 and ZR6001 into ordinary home electrical outlets, the ZR6001 sends audio sources over your home electrical
line for playback by the ZC4001.
PLC (POWER LINE COMMUNICATION)
The ZR6001* converts analog audio signals into noncompressed linear PCM digital signals, modulates them into high frequency signals, and sends them over
power lines.
The ZC4001 demodulates the sent signals and converts them back to analog signals.
* If the condition of the power line degenerates because of the effects of noise from other devices or for other reasons, the ZR6001 uses an audio format of
different sampling rate and data bit length.
1
MEMORY
MODE
F/P
PREV.
STOP
OPEN/CLOSE
TUNING
PLAY
PAUSE
NEXT
ON/STANDBY
POWER
PHONES
MODE
SURROUND
TV
FM/AM
BS
DIGITAL
VIDEO
DVD
RC2020MD
ZC4001
ZC4001
ZR6001
ROOM A
ROOM B ROOM C
Home power line
ZC4001NDFU01ENG 06.3.30, 9:22 AMPage 2 AdobePageMaker6.5J/PPC

ENGLISH
3
q SPEAKERS
w
q
FRONT PANEL
FL DISPLAY AND INDICATOR
a s
d f
a Function display area
This area displays the input source.
s PLC Status display area
This area displays the PLC reception strength.
d Volume/ Text display area
This area displays the volume and other text.
f Clock display area
This area displays the time.
TOP PANEL
STANDBY
POWER ON/STANDBYON/STANDBY
1 .
z x c v b n
z POWER button and STANDBY indicator
When this button pressed once, the unit turns ON
and the display illuminates. When pressed again,
the unit turns OFF and the STANDBY indicator will
be illuminated.
x SOURCE buttons
These buttons are used to switch the source of
ZR6001.
* When the EXT. button is pressed, the source
switches to the EXT. INPUT jack on the rear
panel.
c Cursor ( , , , )/ENTER buttons
These buttons are used to operate the menu
system and source units.
v CONTROL buttons
These buttons are used when operating the PLAY,
STOP, PAUSE, and other commands of a source.
b MUTE button
Press this button to mute the output to the
speakers. Press it again to return the previous
volume level.
n VOLUME UP( )/DOWN( ) buttons
This button is volume control of the ZC4001.
w INFRARED receiver window
This window receives infrared signals for the
remote control unit.
ZC4001NDFU01ENG 06.3.30, 9:22 AMPage 3 AdobePageMaker6.5J/PPC

ENGLISH
4
REAR PANEL
w eq
SERVICE
ONLY
q EXT INPUT
This is the analog audio input. The audio inputs
require RCA-type connectors.
w SERVICE ONLY
This is a servicing port. Do not connect anything to
it.
e AC Power cable
Connect the power outlet on the wall.
REMOTE CONTROL OPERATION
The ZC4001 does not come with a remote controller.
However, it does have an infrared sensor that functions as a remote control signal receptor, and therefore
it can be operated with the system remote controller (RC5500SR, etc.) of other Marantz products.
Remote-controllable range
ThedistancebetweenthetransmitteroftheremotecontrolunitandtheinfraredsensoroftheZC4001
shouldbelessthanabout16.4ft(5meters).
Ifthetransmitterispointedawayfromtheinfraredsensororifthereisanobstaclebetweenthem,remote
controlmaynotbepossible.
60°
Approx. 5 m
ZC4001NDFU01ENG 06.3.30, 9:22 AMPage 4 AdobePageMaker6.5J/PPC

ENGLISH
5
CONNECTIONS
CONNECTING AUDIO COMPONENTS
There is one Audio EXT INPUT jack on the rear panel. You can use this jack to input analog audio signal
from CD, TAPE DECK, or other analog source component.
CONNECTING AC POWER CABLE
Connect the AC power cable of the ZC4001 to a wall electrical outlet. Also connect the AC power cable of
the ZR6001 to a wall electrical outlet.
1
MEMORY
MODE
F/P
PREV.
STOP
OPEN/CLOSE
TUNING
PLAY
PAUSE
NEXT
ON/STANDBY
POWER
PHONES
MODE
SURROUND
TV
FM/AM
BS
DIGITAL
VIDEO
DVD
ZC4001
ZC4001
ZR6001
Up to four ZC4001 units may be connected to the same system at one time.
ROOM A
ROOM B ROOM C
Home power line
Notes:
• The ZC4001 and ZR6001 send audio data over power lines. Therefore, if the condition of the power line
degenerates seriously because of the effects of noise from other devices or for other reasons, audio data may
not be received or may skip.
• If the distance of the power line between the ZC4001 and ZR6001 is very long, audio data may not be received
or may skip.
• At the time of purchase, all ZC4001 and ZR6001 are set to the same Group ID. If used with this same Group
ID, you risk having your music listened into by others. Therefore, set the Group ID as explained herein.
• If the following trouble is experienced, block PLC signals from other sources using a commercially available
power filter, etc.
When a ZC4001 and ZR6001 are connected over PLC, another ZR6001 cannot be added to the same power
line and connected over PLC. In this case, PLC signals are not sent.
If a ZR6001 and ZC4001 are connected over PLC in a nearby apartment unit for example, and there is only
a short distance between your apartment and your neighbor’s, the PLC signals from your neighbor’s
apartment can travel over power lines to your place, mix with your system, and prevent audio output.
ZC4001
ZC4001
ZR6001
ZR6001
ZR6001
ZC4001
ZR6001
ZC4001
ZC4001NDFU01ENG 06.3.30, 9:22 AMPage 5 AdobePageMaker6.5J/PPC

ENGLISH
6
SETUP
PLC SETTING
RECALIBRATION
If audio is lost when the ZC4001 and ZR6001 are
connected over a PLC connection, recalibrate the
signal to the best carrier frequency.
The ZR6001 is set first.
<ZR6001>
Using the OSD menu system, set “MULTI PLC
SERVER”to “ON”.
ZR6001 ON SCREEN DISPLAY MENU SYSTEM
1. Select “9. MULTI PLC”in the SETUP MAIN
MENU with the or cursor buttons, and
press the ENTER button.
2. Select “MULTI PLC SERVER”with the or
cursor buttons. And select “ON”with the or
cursor buttons.
For details, see page 24 in the ZR6001 User’s
Guide.
<ZC4001>
1. Press and hold the ENTER button for 5 sec. or
more.
2. Press the ENTER button.
3. The below message appears when
recalibration is complete.
SET GROUP ID
To set a Group ID, connect the AC power cables of
the ZC4001 and ZR6001 to wall power outlets as
close to each other as possible.
Set the Group ID simultaneously for the ZC4001
and ZR6001.
<ZR6001>
Using the OSD menu system, set “GP-ID
SETTING”to “START”.
ZR6001ONSCREENDISPLAYMENUSYSTEMZR6001ONSCREENDISPLAYMENUSYSTEM
ZR6001ONSCREENDISPLAYMENUSYSTEMZR6001ONSCREENDISPLAYMENUSYSTEM
ZR6001ONSCREENDISPLAYMENUSYSTEM
1. Select “9. MULTI PLC”in the SETUP MAIN
MENU with the or cursor buttons, and
press the ENTER button.
2. Select “GP-ID SETTING”with the or
cursor buttons.
<ZC4001>
1. Press and hold the ENTER button for 5 sec. or
more.
2. Press the button once.
1. 2.
1 .
1. 3. 2.
1 .
3. Simultaneously press the ENTER buttons of
the ZR6001 and ZC4001.
<ZR6001>
GP-ID SETTING : ＊＊
<ZC4001>
The below message appears when the Group ID
has been successfully set.
<ZC4001>
<ZR6001>
GP-ID SETTING : SUCCEED
The below message appears if the units fail to set
the Group ID.
<ZC4001>
<ZR6001>
GP-ID SETTING : MISSING
Notes:
One possible reason the Group ID cannot be set is
power line noise. In that case, unplug the power
cable of the device that is generating noise, then
plug it back in and try setting the Group ID again.
9MULTI PLC
MUL T I
CONNECT I ON MODE :
AUTO
H I GH AUD I O QUAL I TY
HIGH RELIABILITY
GP ID SETTING:START
MA I N EX I T
PLC SERVER:ON
9MULTI PLC
MUL T I
CONNECT I ON MODE :
AUTO
H I GH AUD I O QUAL I TY
HIGH RELIABILITY
GP ID SETTING:START
MA I N EX I T
PLC SERVER:ON
ZC4001NDFU01ENG 06.3.30, 9:23 AMPage 6 AdobePageMaker6.5J/PPC

ENGLISH
7
SLEEP TIMER SETTING
When the set time elapses, the ZC4001
automatically goes on standby.
The sleep timer can be set to 10, 20, 30, 40, 50, 60,
70, 80 or 90 min.
1. Press the ENTER button.
2. Press the ENTER button again.
3. Select the sleep time. Each time the button
is pressed, the sleep time changes in the
order of
OFF →10 →20 →30 →40 →50 →60 →70
→80 →90 →OFF.
Each time the button is pressed, the sleep
time changes in the order of
OFF →90 →80 →70 →60 →50 →40 →30
→20 →10 →OFF.
4. Press the ENTER button to return to the
normal display.
1. 2. 4. 3.
1 .
WAKE UP TIMER
The Wake Up Timer outputs an audio alarm at the
set time. The volume level of the alarm can be
user-set.
1. Press the ENTER button once, then press the
button.
2. Press the ENTER button again.
3. Each time the and buttons are pressed,
the Wake Up Timer switches between “ON”
and “OFF”.
4. Press the button to get the hour setting.
Press the and buttons to set the hour.
5. Press the button to get the minutes setting.
Press the and buttons to set the
minutes.
6. Press the ENTER button again.
Press the and buttons to set the volume
of the alarm.
7. Press the ENTER button to return to the
normal display.
When the Wake Up Timer is turned ON, a
symbol appears in front of the time display.
8. When the set time is reached, an audio alarm
outputs. If not stopped, the alarm gradually
gets louder. To stop the alarm, press the
ENTER button.
The Wake Up Timer can be set when the
Standby Mode is set to “NORMAL”.
1 .
1. 2.
6. 7. 8.
3. 4.
5. 6. 4. 5.1.
BASS BOOST SETTING
The Bass Boost feature is turned ON/OFF as
follows.
When ON, bass tones are accented. When OFF,
normal audio is produced.
1. Press the ENTER button once, then press the
button twice.
2. Press the ENTER button again.
3. Each time the button is pressed, the Bass
Boost setting switches between ON and OFF.
ON ↔OFF
4. Press the ENTER button to return to the
normal display.
1. 2. 4.1. 3.
1.
ZC4001NDFU01ENG 06.3.30, 9:23 AMPage 7 AdobePageMaker6.5J/PPC

ENGLISH
8
STANDBY MODE SETTING
The ZC4001 has two Standby Modes. The
Standby Mode is set as follows.
ECONOMY: This is a low power consumption
mode. The clock is not displayed.
NORMAL: This is the normal standby mode. The
clock is displayed.
1. Press the ENTER button once, then press the
button six times.
2. Press the ENTER button again.
3. Each time the and buttons are pressed,
the Standby Mode switches between
“ECONOMY”and “NORMAL”.
When “ECONOMY”is set as the Standby
Mode, the time is not displayed when the unit
is on standby.
Also, the Wake Up Timer cannot be set in the
Economy mode.
4. Press the ENTER button to return to the
normal display.
1. 2. 4. 3.1.
1.
CLOCK SETTING
The time is set as follows.
1. Press the ENTER button once, then press the
button five times.
2. Press the ENTER button again.
3. Each time the and buttons are pressed,
the clock switches between the 12-hour and
24-hour display.
4. Press the button to get the hour setting.
5. Press the and buttons to set the hour.
6. Press the button to get the minutes setting.
7. Press the and buttons to set the
minutes.
8. Press the ENTER button to start the clock and
return to the normal display.
1. 2. 8. 4. 6.
3. 5. 7.
1.
1.
SOUND EFFECT SETTING
The Sound Effect mode is set as follows: Sound
dynamics increase in the order of MODE1 →
MODE 2 →MODE3.
Setting the NIGHT MODE compresses the
dynamic range .
This softens loud passages such as sudden
explosions, to help prevent disturbing others late
at night.
1. Press the ENTER button once, then press the
button three times.
2. Press the ENTER button again.
3. Select a Sound Effect mode. Each time the
button is pressed, the Sound Effect mode
changes in the order of
OFF →MODE1 →MODE2 →MODE3 →
NIGHT MODE →OFF.
Each time the button is pressed, the Sound
Effect mode changes in the order of
OFF →NIGHT MODE →MODE3 →MODE2
→MODE1 →OFF.
WOW is activated in all three Sound Effect
modes: 1, 2 and 3.
4. Press the ENTER button to return to the
normal display.
1. 2. 4. 3.1.
1.
DISPLAY DIMMER SETTING
The brightness of the FL display can be adjusted.
The display darkens in the order of OFF →
LEVEL1 →LEVEL2 →LEVEL3.
1. Press the ENTER button once, then press the
button four times.
2. Press the ENTER button again.
3. Select a dimmer level. Each time the button
is pressed, the brightness of the FL display
changes in the order of
OFF →LEVEL1 →LEVEL2 →LEVEL3 →
OFF.
Each time the button is pressed, the
brightness of the FL display changes in the
order of
OFF →LEVEL3 →LEVEL2 →LEVEL1 →
OFF.
4. Press the ENTER button to return to the
normal display.
1. 2. 4. 3.1.
1.
ZC4001NDFU01ENG 06.3.30, 9:23 AMPage 8 AdobePageMaker6.5J/PPC

ENGLISH
9
2. LISTENING TO SOURCES OVER THE PLC (CD,
TAPE, CDR, DVD, TV, VCR1, DSS OR AUX1)
To listen to these sources, the ZR6001 must be
connected to the unit and set accordingly. For
details, see the ZR6001 User’s Guide.
1. Press the button of the desired source.
2. Operate the source with the PLAY, STOP,
PAUSE, , , and buttons.
3. LISTENING TO SOURCES CONNECTED TO EXT
INPUT
1. Press the EXT. button.
2. Operate the unit connected to the EXT INPUT
jack on the rear panel.
LISTENING OVER THE PLC
Check the settings of the ZR6001.
Using the OSD menu system of the ZR6001, set
“MULTI PLC SERVER”to “ON”.
For details, see the ZR6001 User’s Guide.
ZR6001 ON SCREEN DISPLAY MENU SYSTEM
1. LISTENING TO THE TUNER
1. Press the TUNER button.
2. To switch between FM and AM, press the
TUNER button again.
3. To select a station, use the / buttons.
4. To select a preset station, use the /
buttons. (With the ZR6001, this works only
when stations have been preset.)
BASIC OPERATION
TURNING THE POWER ON
1. Press the POWER button to turn the power
ON.
When the power turns ON, the ZC4001
resumes the same status that existed when
power was turned OFF the last time.
2. Press the POWER button again to set the
ZC4001 on standby.
Caution:
Power to the ZC4001 is always ON (standby
state) while the AC power cable is connected to a
wall electrical outlet.
To completely shut OFF the power, unplug the
AC power cable from the wall electrical outlet.
However, if the AC power cable is left unplugged
for an extended period of time, the clock resets
and the time must be set again.
1. 2.
STANDBY
POWER ON/STANDBYON/STANDBY
1.
ADJUSTING THE VOLUME
1. Press the VOLUME / buttons to adjust
the volume.
Pressing the VOLUME button increases
the volume.
Pressing the VOLUME button decreases
the volume.
Volume can be adjusted in the (Min.) 01 -
(Max.) 79 range.
Pressing and holding the VOLUME /
buttons increases or decreases the volume
rapidly.
MUTE
Pressing the MUTE button temporarily mutes the
sound from the speakers.
Pressing the MUTE button again cancels the mute
and restores the original volume level.
1.
STANDBYSTANDBY
POWERPOWER
ON/STANDBYON/STANDBY
1. 2. 4.3.
1 .
1.
1.
9MULTI PLC
MUL T I
CONNECT I ON MODE :
AUTO
H I GH AUD I O QUAL I TY
HIGH RELIABILITY
GP ID SETTING:START
MA I N EX I T
PLC SERVER:ON
1 .
2.1. 2.
1.
1 .
ZC4001NDFU01ENG 06.3.30, 9:23 AMPage 9 AdobePageMaker6.5J/PPC

ENGLISH
10
CAUSE
The power plug is not connected.
Mute is on.
The input cable is not connected
correctly. (EXT INPUT)
The volume control is turned all the way
down.
The PLC is wrongly set.
The source (Marantz product) is not
correctly connected to the ZR6001.
The source (other brand product) is not
correctly connected to the ZR6001.
Another device is generating a high
level of noise on the power line.
Two ZR6001 units are connected to the
same system.
Batteries are exhausted.
Function key setting for the remote
control unit is wrong.
The distance between the ZC4001 and
the remote control unit is too far.
Something is blocking the ZC4001 and
the remote control unit.
SYMPTOM
The ZC4001 cannot be turned
on.
No sound even when power is
on.
Nothing is heard over PLC
connection.
Control with the remote control
unit fails.
REMEDY
Connect the power plug to the outlet.
Cancel mute using the MUTE button.
See the connection diagram and connect the
cables correctly.
Adjust the volume.
Correctly set the PLC as explained in “PLC
SETTING”on page 6. You can check whether or not
the ZC4001 is securely connected to the ZR6001
via the PLC status display area of the ZC4001.
Marantz products connect over an RC-5 bus.
Correctly connect the source as explained in the
ZR6001 User’s Guide.
Other brand sources are controlled by remote
control signals sent from an emitter connected to
the IR EMITTER OUT terminals of the ZR6001 to
the IR sensor of the source unit.
Operation requires you to set the brand code or use
the IR code learning feature. Correctly connect the
source as explained in the ZR6001 User’s Guide.
Turn OFF the device that is causing the noise or
move it farther away from the ZC4001 and ZR6001.
Using the OSD menu system, set “MULTI PLC
SERVER”of one of the ZR6001 unit to “OFF”. (See
page 6)
Replace all the batteries with new ones.
Press the AMP button on the remote control unit to
confirm control of the ZR6001.
Move closer to the ZC4001.
Remove the offending object.
TROUBLESHOOTING
In case of trouble, check the following before calling for service:
1. Are the connections made properly?
2. Are you operating the unit properly following the user’s guide?
3. Are the power amplifiers and speaker working properly?
If the unit does not operate properly, check items shown in the following table.
If your trouble cannot be recovered with the remedy actions listed in the following table, malfunction of the
internal circuitry is suspected; immediately unplug the power cable and contact your dealer, nearest
Marantz authorized dealer or the Marantz Service Center in your country.
AUDIO SECTION
Power Output ......... 10W + 10W (JEITA, 1kHz, 6 ohms)
.... 7W + 7W (20Hz –20kHz, THD=0.05%, 6 ohms)
EXT INPUIT Sensitivity/Impedance .. 200mV / 22k ohms
PLC SECTION
Modulation Method ....................................... Multi carrier
Frequency Band ..................................... 2MHz –20MHz
TECHNICAL SPECIFICATIONS
1 .
SERVICE
ONLY
STANDBYSTANDBY
POWERPOWER ON/STANDBYON/STANDBY
362 mm
1 mm
360 mm
128 mm
111.5 mm
120 mm
1 mm
DIMENSIONS
GENERAL
Power Requirement ......................... AC 230 V 50/60 Hz
Power Consumption ................................................34 W
Weight ................................................................... 3.0 kg
ACCESSORIES
User Guide .................................................................... 1
Specifications subject to change without prior notice.
HOW TO RESET THE UNIT
Should the operation or display seem to be abnormal, reset the unit with the following procedure.
The ZC4001 is turned on, press and hold the MUTE and STOP buttons simultaneously for 3 seconds or
more.
ZC4001NDFU01ENG 06.3.30, 9:23 AMPage 10 AdobePageMaker6.5J/PPC

03/2006 00M10CW851310 mzh-dPrinted in China
is a registered trademark.
www.marantz.com
You can find your nearest authorized distributor or dealer on our website.
U.S.A. Marantz America, Inc. 1100 Maplewood Drive, Itasca, IL 60143, U.S.A.
EUROPE Marantz Europe B.V. P.O. Box 8744, 5605 LS Eindhoven, The Netherlands
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.
Confidential Unpublished Works. Copyright 1992-1999 Dolby Laboratories, Inc. All rights reserved.
ZC4001NDFU00cover 06.3.30, 9:22 AMPage 4 AdobePageMaker6.5J/PPC