Life A TM
“room correction” strategies in that it improves the listening characteristics of your entire room rather than for just one or two seats.
audio system.
On the A/V side, the SR8002 features HDMI switching (version 1.3a) for up to four sources and two display devices. And there’s format conversion to HDMI
with Time Base Correction so even your older video sources will look their best. If you’re not quite ready for HDMI (or if your displays aren’t), the SR8002
advanced to enhance your enjoyment. Let’s put this even more succinctly – it’s a Marantz!
• THX Select 2 n
• 125 watts (into 8 ohms) x 7 ch. Amps
• Dolby Digital EX ®, Pro Logic IIx ®(Movie/Music/Game)
• DTS 96/24, ES ®, Neo:6, DTS-HD, Dolby True HD
• SRS Circle Surround II ®
• HDCD Decoder
• HDMI (V1.3a)repeating: 4-In/ 2-Out
• Video up-conversion (w/TBC) to HDMI with 480I/480P converter
• All discrete “Current Feedback” stages
• 32bit DSP
• 192 kHz/24-bit D/A converters for all channels
• Audyssey Auto Calibration
• HD compatible component video switching (4 in / 2 out)
• Assignable dual component video outputs
• Assignable video inputs
• XM-Ready with discrete IR commands
• XM-HD Surround
• Dielectric protected binding posts
• MDAX Marantz Dynamic Audio eXpander (improves compressed audio)
• Dolby Headphone
• Toroidal transformer
• Copper plated chassis
• 2nd Zone A/V and 3rd Zone Audio output
(Individual source) w/discrete commands
• Speaker A/B switching
• Lip sync. control
• RS-232C terminal for system control
• Direct IR Flasher input and IR Receiver input
• Dual IR Emitter outputs
• Dual DC Trigger outputs
• D-BUS (RC-5 In/Out) remote connection
• Shallow Chassis < 16”
• Learning/pre-programmed backlit remote with LCD
• 3 year limited warranty
Compatible
SR8002
THX SELECT2 DOLBY DIGITAL EX®/DTS ES®SURROUND RECEIVER
2
