Marantz RC3001/E1B User manual

Please use this service manual with referring to the user guide ( D.F.U. ) without fail.
Service
Manual Remote Controller
RC3001
RC3001 /E1B
Part no. 90M43CW855010
First Issue 2007.10
MZ
RC3001
TABLE OF CONTENTS
SECTION PAGE
1. TECHNICAL SPECIFICATIONS ........................................................................................... 1
2. PARTS LIST.......................................................................................................................... 2
3. INSTALLING Wizz.it 3........................................................................................................4
RC3001
RX3001

MARANTZ DESIGN AND SERVICE
Using superior design and selected high grade components, MARANTZ company has created the ultimate in stereo sound.
Only original MARANTZ parts can insure that your MARANTZ product will continue to perform to the specifications for which
it is famous.
Parts for your MARANTZ equipment are generally available to our National Marantz Subsidiary or Agent.
ORDERING PARTS :
Parts can be ordered either by mail or by Fax.. In both cases, the correct part number has to be specified.
The following information must be supplied to eliminate delays in processing your order :
1. Complete address
2. Complete part numbers and quantities required
3. Description of parts
4. Model number for which part is required
5. Way of shipment
6. Signature : any order form or Fax. must be signed, otherwise such part order will be considered as null and void.
SHOCK, FIRE HAZARD SERVICE TEST :
CAUTION : After servicing this appliance and prior to returning to customer, measure the resistance between either primary AC
cord connector pins ( with unit NOT connected to AC mains and its Power switch ON ), and the face or Front Panel of product
and controls and chassis bottom.
Any resistance measurement less than 1 Megohms should cause unit to be repaired or corrected before AC power is applied,
and verified before it is return to the user/customer.
Ref. UL Standard No. 60065.
In case of difficulties, do not hesitate to contact the Technical
Department at above mentioned address.
070719MZ
USA
MARANTZ AMERICA, INC
100 CORPORATE DRIVE
MAHWAH, NEW JERSEY 07430
USA
EUROPE / TRADING
MARANTZ EUROPE B.V.
P. O. BOX 8744, BUILDING SILVERPOINT
BEEMDSTRAAT 11, 5653 MA EINDHOVEN
THE NETHERLANDS
PHONE : +31 - 40 - 2507844
FAX : +31 - 40 - 2507860
KOREA
D&M SALES AND MARKETING KOREA LTD.
CHUNG JIN B/D., #1001,
53-5, WONHYORO 3 GA, YONGSAN-GU,
SEOUL, 140-719, KOREA
PHONE : +82 - 2 - 323 - 2155
FAX : +82 - 2 - 323 - 2154
CANADA
D&M CANADA INC.
5-505 APPLE CREEK BLVD.
MARKHAM, ONTARIO L3R 5B1
CANADA
JAPAN
D&M BUILDING, 2-1 NISSHIN-CHO,
KAWASAKI-KU, KAWASAKI-SHI,
KANAGAWA, 210-8569 JAPAN
D&M Holdings Inc.
CHINA
MARANTZ SHANGHAI TRADING LTD.
ROOM.506 SHANGHAI LIGHT INDUSTRY MANSION
1578 NANJING (WEST) ROAD SHANGHAI
CHINA
TEL : 021 - 6248 - 1064
FAX : 021 - 6248 - 3565
NOTE ON SAFETY :
Symbol Fire or electrical shock hazard. Only original parts should be used to replaced any part marked with symbol .
Any other component substitution (other than original type), may increase risk of fire or electrical shock hazard.
安全上の注意：
がついている部品は、安全上重要な部品です。必ず指定されている部品番号のものを使用して下さい。

1
1. TECHNICAL SPECIFICATIONS
RESET
26
ENGLISH
SPECIFICATIONS
RC3001
LCD Resolution
.............................................“11x81pixel x6 line
................................................9x81pixel x1line”
Backlight .............................................. EL back light
Transmission ..............................................IR or RF
Learning.......................... Capability: MAX 1000code
Operating/ learning IR frequency range
.....................................................Up to 455kHz
RF carrier frequency ............................... 433.92MHz
Rechargeable battery pack
.............................NiMH Battery Pack 700 mAh
Interface
..
USB 2.0 connection with USB bus power supply
Memory Size...................................... 4M bit (512kB)
Dimensions (W x H x L)
............... 54 x 228 x 25 mm (2-3/16 x 9 x 1ins.)
Unit Weight (With Batteries) ................ 210g (0.5lbs)
DC 9V
25mm (1ins.)
54mm (2-3/16 ins.)
228mm (9 ins.)
RC3001E01ENG.indd26 07.8.311:04:45PM
26
ENGLISH
SPECIFICATIONS
RC3001
LCD Resolution
.............................................“11x81pixel x6 line
................................................9x81pixel x1line”
Backlight .............................................. EL back light
Transmission ..............................................IR or RF
Learning.......................... Capability: MAX 1000code
Operating/ learning IR frequency range
.....................................................Up to 455kHz
RF carrier frequency ............................... 433.92MHz
Rechargeable battery pack
.............................NiMH Battery Pack 700 mAh
Interface
..
USB 2.0 connection with USB bus power supply
Memory Size...................................... 4M bit (512kB)
Dimensions (W x H x L)
............... 54 x 228 x 25 mm (2-3/16 x 9 x 1ins.)
Unit Weight (With Batteries) ................ 210g (0.5lbs)
DC 9V
25mm (1ins.)
54mm (2-3/16 ins.)
228mm (9 ins.)
RC3001E01ENG.indd26 07.8.311:04:45PM
27
ENGLISH
RX3001
MAX186mm (7-3/8ins.)
MIN105mm (4-3/16ins.)
27mm
(1-1/8ins.)
MAX190mm (7-1/2ins.)
MIN109mm (4-5/16ins.)
102mm (4-1/16ins.)
63.5mm (2-1/2ins.)
DC 9V
RX3001
RF carrier frequency ............................... 433.92MHz
Operating/ learning IR frequency range
.....................................................Up to 100kHz
IR emitter output ...................................................x6
Dimensions (W x H x L)
...
102 x 63.5 x 27 mm (4-1/16 x 2-1/2 x 1-1/8 ins.)
Unit Weight ............................................ 90g (0.2lbs)
AC Adapter
Power Supply................. 100 V-240 V AC / 50-60 Hz
Power Output.......................................DC9V 800mA
RC3001E01ENG.indd27 07.8.311:04:45PM
27
ENGLISH
RX3001
MAX186mm (7-3/8ins.)
MIN105mm (4-3/16ins.)
27mm
(1-1/8ins.)
MAX190mm (7-1/2ins.)
MIN109mm (4-5/16ins.)
102mm (4-1/16ins.)
63.5mm (2-1/2ins.)
DC 9V
RX3001
RF carrier frequency ............................... 433.92MHz
Operating/ learning IR frequency range
.....................................................Up to 100kHz
IR emitter output ...................................................x6
Dimensions (W x H x L)
...
102 x 63.5 x 27 mm (4-1/16 x 2-1/2 x 1-1/8 ins.)
Unit Weight ............................................ 90g (0.2lbs)
AC Adapter
Power Supply................. 100 V-240 V AC / 50-60 Hz
Power Output.......................................DC9V 800mA
RC3001E01ENG.indd27 07.8.311:04:45PM
25
ENGLISH
4. STATUS INDICATOR
This displays the settings made in the MAIN
MENU and the status of the remote device.
CHECKING THE STATUS
1. Display the MAIN MENU on the LCD of the
RC3001, then press the button next to the
“STATUS”indicator.
2. Pressing the ENTER button cycles through
the statuses of each of the items below.
• Remaining learning memory
• Remaining macro steps
• LCD timer setting
• Backlight timer setting
• Beep setting
• Firmware version
• Current clock time
Either press the ENTER button or wait
three seconds so that the LCD returns to
the MAIN MENU.
5. RESET
If the RC3001 is not operating properly, use the
procedure below to perform a reset (restart).
Performing a reset does not erase the settings
in the RC3001.
1 . Remove the battery case cover.
2 . Use a paper clip or other object to press the
reset button in the reset hole as shown in
the figure below to reset the RC3001.
Note:
Perform the reset with the battery pack loaded.
6. PROGRAMMABLE CODES
NUMBER OF PROGRAMMABLE CODES
This remote control has Flash memory 4M
bit (512KB) that enables it to program remote
control signals include the learned codes for up
to 8000 codes.
This number is for Marantz remote control
codes.
The actual number of codes may be less than
8000 depending on the type of the programmed
remote control signals.
PROGRAMMABLE CODES
This remote control may be unable to learn the
codes for some AV equipment due to the code
types, system, or other differences.
RC3001E01ENG.indd25 07.8.311:04:45PM

2
Double side adhesive tape
2. PARTS LIST
1
3
2
4 5
6

4
3. INSTALLING Wizz.it 3
2
INSTALLING Wizz.it 3
1 . At first, you download the software “Wizz.it 3”from the Home Entertainment section of your region in
Marantz Website http://www.marantz.com.
2 . Open the downloaded file in your PC and follow the on screen instructions to install the editor.
Notes:
You can install Wizz.it 3 together with other Marantz editors.
The files of Wizz.it 3 are automatically placed in a separate directory.
CUSTOMIZING THE CONFIGURATION FILE
During the installation of the editor, one configuration file was also saved on your PC.
There is one default configuration file which you can start from to create a custom configuration file (CF)
(defaultRC3001.mcf).
The default CF is constructed in such a way that they can be easily adjusted to the needs of every
customer.
• This file contains the main Marantz remote control codes for enabling control of Marantz products with
the default settings.
CONNECTIONS
CONNECT PC AND REMOTE CONTROLLER
1. The attached USB cable connects to the USB port of remote controller and the USB port of your
PC
2. Open the USB Device wizard menu in your PC automatically.
3. Select the automatic scanning of USB driver or select the location of USB driver.
The location of RC2001_3001 USB driver
C:\Program Files\Marantz\Marantz Wizz.it 3
Note:
The USB driver of RC2001 and RC3001 does not take the certification of Microsoft.
However, you can use it in your PC.
RC3001EWizzit3ENG.indd2 07.9.31:38:29PM