marsden B-800 User manual

1
B-800
USER MANUAL
PLEASE TAKE THE TIME TO READ THESE INSTRUCTIONS BEFORE
STARTING TO USE THE SCALES

2
TABLE OF CONTENTS
TABLE OF CONTENTS.............................................................................. 2
INTRODUCTION........................................................................................ 3
SAFETY INSTRUCTION ........................................................................... 3
CLEANING..................................................................................................4
MAINTENANCE......................................................................................... 4
DISPOSING OF THE SCALE..................................................................... 4
Explanation of the graphic symbols ............................................................. 5
TO Ready Scale for Use............................................................................... 6
POWER SUPPLY & LOW BATTERY........................................................ 7
POWER SUPPLY......................................................................................... 7
INSTALLING THE BATTERY...................................................................8
KEY FUNCTION DESCRIPTION:............................................................. 8
PANELAND LCD DISPLAY......................................................................9
LCD DISPLAY............................................................................................. 9
SPECIFICATIONS..................................................................................... 10
GENERALWEIGHING OPERATION..................................................... 11
INSTRUCTION OF HOLD FUNCTION..................................................12
INSTRUCTION OF TARE FUNCTION...................................................13
INSTRUCTION AUTO SHUT-OFF FUNCTION..................................... 14
INSTRUCTION CALIBRATION FUNCTION......................................... 15
INSTRUCTION OF BACKLIGHT FUNCTION......................................16
INSTRUCTION OF INTERNAL SETTING............................................. 17
ERROR MESSAGE................................................................................... 18
R OHS C O M P L I A N C E
.............................................................................19

3
INTRODUCTION
Thank you for purchasing a Marsden Portion Control Scale.
Please read this instruction manual carefully before use. Keep these
instructions handy for future reference.
SAFETY INSTRUCTION
Before putting the device into use, please read with care the
information given in the Operating Instructions. They contain
important instructions for installation, proper use and maintenance of the
device.
The manufacturer shall not be liable for damages arising out of failure to
heed the following instructions:
When using electrical components under increased safety requirements,
always comply with the appropriate regulations.
Improper installation will render the warranty null and void.
Ensure the voltage marked on the power supply unit matches your mains
power supply.
This device is designed for use indoors.
Observe the permissible ambient temperatures for use
The device meets the requirements for electromagnetic compatibility. Do
not exceed the maximum values specified in the applicable standards.
These batteries should be kept away from small children. If swallowed,
promptly seek medical assistance.
Expected Service Life: 5 years
If you have any problem, contact your local service partner.

4
CLEANING
We would recommend using alcohol based wipes or similar when cleaning
the scales.
Please do not use large amounts of water when cleaning the scales as
this will cause damage to the scales electronics, you should also refrain
from using corrosive liquids or high pressure washers.
Always disconnect the scales from the mains power supply before
cleaning.
MAINTENANCE
The scale does not require any routine maintenance. However, we
recommend checking the scale’s accuracy at regular intervals. The
regularity of these checks is dependent on the level of use and the state of
the scale. If any inaccuracies occur, please contact your local dealer or
service partner
DISPOSING OF THE SCALE
This product is not to be treated as regular household waste, but should
be handed in to an electrical/electronic equipment recycling centre.
You can obtain further details from your local council, your municipal
waste disposal company or the firm which you purchased the product

5
Explanation of the graphic symbols
SN-21300100
Designation of the serial number of every
device, applied at the device.
(Number as an example)
“Please note the accompanying documents“
or “Observe operating instructions”
Type B applied part
Dispose of old appliances separately from
your household waste!!
Instead, take them to communal collection
points.
Carefully read this operation manual
before setup and commissioning, even if
you are already familiar with Marsden
scales.
Transport and storage temperature limit
indicating the upper and the lower limit
(Transport and storage temperature on
packaging)
+60°C
-20°C

6
TO Ready Scale for Use
1. Remove the scale from the box, along with the digital display and
the bag with screws and a plastic plate. Remove any protective
film from the top of the scale platform.
2. Turn the scale base over. Insert the base of the digital display into
the slot on the bottom of the scale.
3. Use the 3 larger screws to secure the digital display to the scale.
4. Insert the connector plug of the
digital display into the jack in the
scale base.
5. Use the 4 smaller screws to secure the plastic plate to the base of
the digital display (the gel padding should face outward).

7
POWER SUPPLY & LOW BATTERY
1. The B-800 scale uses 4 xAA size alkaline batteries.
2. Low battery indication will display on LCD display when battery
power is insufficient to perform the weighing.
3. When “ ” is displayed, please change batteries.
Please refer to “INSTALLING THE BATTERY”.
POWER SUPPLY
Make sure the battery pack is installed in the battery box of indicator,
or, plug the connector of AC ADAPTOR (9V 0.1A) in the scale.
B-800 uses 4 xAAsize alkaline batteries (not included) for operation.
If you want scale to be operated by battery, please install batteries by
referring to instruction below.
Adaptor plug

8
INSTALLING THE BATTERY
You can also use the adaptor (standard) as power supply.
KEY FUNCTION DESCRIPTION:
1. ON/OFF:
To power ON and OFF the scale.
2. UNIT/HOLD:
Press to UNIT select between kg and lb
Press 3 Seconds to HOLD Function
3. TARE / :
Press to TARE function.
Press 3 Seconds to Backlight on or Backlight off
Installing 4 AA 1.5V batteries

9
PANEL AND LCD DISPLAY
PANEL
LCD DISPLAY
1. : Stable symbol
2. : Minor weight value
3. : Low battery

10
SPECIFICATIONS
MODEL#
B-800
Capacity
Division
5000g x 1g
10 lb x 0.002lb
Units of Measure
g, lb
Function keys
ON/OFF, UNIT/HOLD, TARE/LIGHT
Stabilisation Time
1-2 seconds
Operating Temp. and
humidity
0°C - 40°C
30%-90% RH
Transport and
storage temperature
and humidity
-20°C +60°C
25%-95% RH
Power supply
Four 1.5V AA size alkaline batteries
ADAPTOR 12v 1A
Indicator display
1.5” LCD display with 4 1/2 active digits
Dimensions
Assembled size: 179×245×207 mm
Platform size: 179×169×58 mm