WIRELESS WIRELESS NOTE
1
This device complies with part 15of theFCC rules. Operations is subject to the following two
conditions: (1)This devicemay not cause harmful interferenceand (2) This devicemust accept
any interference received, including interferencethat maycause undesired operation
Notice: The changes ormodifications not expressly approved by theparty responsible for
compliance could voidthe user’s authority tooperate the equipment.
IMPORTANTNOTE: Tocomply with the FCC RF exposure compliance requirements, no
change totheantennaor the device ispermitted. Anychangetothe antennaor the device
could resultin the device exceeding the RF exposure requirements and void user’sauthority
to operate the device.
1. Introduction
Thank you for purchasing our product. This wireless microphone system operates in UHF
band frequency with synthesizer controlled. Thesystem with 16 or 64 selectablefrequencies
via PhaseLocked Loop (PLL) circuitry makes it easy to choosenon-interfered channels.
Pleaseread this instruction manual carefully before operating thesystem.This manual
covers the configurationand operation of thewireless microphone system.
2. Safety
ØDo not spillliquidon the applianceand do not drop it on ahard concrete floor.
ØDo not place the appliance near heat sources such as radiators, amplifier, oretc. Donot
expose it todirect sunlight, extremely dust, excessive moisture, or vibration.
ØTakeout the battery from transmitter, if the appliance has beennot used fora longer
period. This will avoid the damage resulting from a defective leaking battery
3. Environment
ØDo not throwused batteries into afire or garbage bin with domestic rubbish. Be sure to
disposeof usedbatteries inaccordance with local waste disposal rules.
ØWhen disposing the equipment, remove the batteries, separatethe case, circuit boards,
and cables, and dispose of all components inaccordancewith local waste disposal rules.
4. Wireless Note
ØBefore setting up, make sure that the transmitter and receiver are tuned to the same
frequency.
ØDo not use two transmitters inthe same frequency.
ØUse good quality batteries toavoid the damage resulting from adefective leakingbattery.
ØTo avoid interference, do not put the receiver toonear metal object and avoid obstructions
between transmitter and receiver.
ØAvoid theinterference fromTV, radio, otherwireless appliances and etc.
Wireless Microphone
