Mash Fifty 50 CC User manual

User Manual

Congratulations!
You are the new owner of a MASH which embodies a new spirit, a new trend: a
motorcycle with a cool new look and new design philosophy
"Vintage", a new concept, synonymous with freedom and individuality.
Please read this manual thoroughly before using your MASH.

Important Notes
Running-in of your new motorcycle
The first 1.000 km check-up is very important for a motorcycle. The correct
running-in can guarantee both the longest lifecycle and the best performance of
the vehicle. Running-in ensures machined surfaces are gently smoothed to
ensure correct engagement.
Careful and patient running-in will ensure the motorcycle gives full potential to
its excellent performance. It is important not to do anything that may cause
overheating of engine components.
For specific running-in method, please refer to "Running-in of a new
vehicle".
Please carefully read this manual and strictly observe all instructions.
Special attention should be paid to the contents emphasized with the terms of
"warning" "caution" and "note"
Warning……Relates to personal safety. Ignoring it may result in an accident.
Precaution……Refers to operational methods that must be followed or
measures that should be taken, so as to prevent damage.
Note……Refers to special explanations to make maintenance or important
descriptions more explicit.
The User Manual is an important and permanent document of the motorcycle.
Please transfer the manual to any new owner if you sell your vehicle to move up
to your next MASH motorcycle

6
Foreword
Thank you for your choosing a MASH motorcycle. In design, development and
manufacturing of the motorcycle, our company applies the latest advanced
technology and equipment to provide you with a vehicle that is reliable, novel in
design and elegant in appearance. Motorcycle riding is one of the most exciting
activities. The motorcycle is an ideal means of transport but it can also give you
huge riding pleasure. Before riding your motorcycle for the first time, please
become familiar with all stipulations and requirements mentioned in this
instruction/user manual.
The instruction manual details the correct use and maintenance of the
motorcycle. Observing the details in this manual will ensure your motorcycle
will perform faultlessly for a long time. Your MASH dealer has skilled and well
trained technical professionals who will provide the best maintenance and
service to your motorcycle.

CONTENTS
Specifications
Fifty ................................................................................................................... 8
Chapter 1
User Instructions ............................................................................................9
Chapter 2
Main Controls and Features...........................................................................11
Chapter 3
Controls...........................................................................................................12
Chapter 4
Recommendations for Fuel and Engine Oil ..................................................23
Chapter 5
Running-in of New Motorcycle ......................................................................25
Chapter 6
Inspection before Driving.............................................................................. 27
Chapter 7
Essentials of Driving ...................................................................................... 28
Chapter 8
Inspection and Maintenance .........................................................................32
Chapter 9
Measures to Reduce Pollution...................................................................... 56
Chapter 10
Troubleshooting ............................................................................................ 57
Chapter11
Storage Method............................................................................................. 61

8
SPECIFICATIONS
Mash Fifty 50 cc
This list is for information only. Changes can be made by the
manufacturer without warning to customers.
Engine type
Single cylinder 4-stroke, air cooling
Engine capacity
49cc
Compression ratio
9.0:1
Idle speed
1.450 RPM
Power max
2.1 kW at 6.800 RPM
Torque max.
3.1 Nm at 5.000 RPM
Ignition
CDI
Speed max.
45 km/h
Spark plug
A7TC
Battery
12v 8ah
Front tire
90/90-18
Rear tire
3/25-18
Oil engine
SAE10W-30
Oil engine quantity
830 ml
Length /Width /Height
1.980/830/1.110
Wheelbase
1.330 mm
Ground clearance
140 mm
Weight
100 kg
Weight max
255 kg
Fuel tank capacity
11 liters
Fuel
SP95 or SP98 (SP95 E10 not recommended)

9
Chapter 1
User Instructions
Instructions on safe riding of your motorcycle
Always observe the traffic and licensing laws in your country and follow the five
points below.
Wear safety helmet
A high-quality safety helmet is the most important item of personal protection
in motorcycle riding. Therefore, be sure to wear one whenever you drive your
motorcycle. Also wear a pair of proper protective glasses and good gloves.
Be familiar with the vehicle
Understanding how your vehicle is built, maintained and the correct functioning
of all the key controls is vital to enjoying safe motorcycling. Be sure to keep in
mind that skill comes from practice. Train and practice in a safe traffic free
environment.
Understand what a safe speed is
Drive at all times at a speed which is consistent with the prevailing weather
conditions, road conditions and your skill level. Keep within safe parameters
when judging your speed.
Please note that on rainy days, the braking distance is two times as much as
that in fine weather. Keep away from any manhole cover, paint mark or oil
spillage to prevent skidding and always keep a safe distance with any vehicle in
front.
Wear correct clothing
As well as a crash helmet, your motorcycle outfit is important in providing you
with the safest possible experience. Always wear clothing designed for
motorcycling (your dealer can advise).
Do not wear loose or badly fitting clothing which could become entangled with
the moving parts.
Inspection before driving
Always inspect the vehicle before use off to make sure there are no obvious
faults.

10
The Position of serial numbers
Chassis number (or VIN code) Engine number
Position of metal nameplate
The chassis number (or VIN code) and engine number are necessary for
registration of your motorcycle. The numbers are also needed when ordering
components or spare parts.
Write the numbers in the spaces below, for future reference.
Chassis number :
Engine number :