Master cool HYDRA-SWAGE User manual

Deutsch
Français
Español
English
Instruction Manual
“HYDRA-SWAGE” TUBE EXPANDING TOOL KIT
Manual de Instrucciones
“HYDRA-SWAGE” CONJUNTO HERRAMIENTAS PARA EXPANSIÓN DE TUBOS
Manuel d’Instructions
“HYDRA-SWAGE” ENSEMBLE D’OUTILLAGE HYDRAULIQUE
POUR L’EXPANSION DES TUBES
Gebrauchsanweisung
“HYDRA-SWAGE” ROHR PRESSWERKZEUG SATZ
Manuale d’uso
“HYDRA SWAGE” KIT ALLARGATUBO IDRAULICO
Italiano
99 Washington Street
Melrose, MA 02176
Phone [phone]
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com

2
English
English
OPEN CLOSE
ADAPTER
RELIEF VALVE
KNOB
CONE
EXPANDER
HEAD
TUBING
NEVER OPERATE PUMP WITHOUT TUBING ON EXPANDER HEAD!
OPEN CLOSE
1) Use soft copper tube or heat (anneal) the section of
hard copper tubing to be expanded.
2) De-burr the inner walls of the tubing completely and
make sure the tube will fit easily over the expander
head.
DO NOT FORCE THE TUBE OVER THE EXPANDER
HEAD!
3) Apply lubricant (preferably grease) to the cone
before using.
4) Screw the adapter onto the shaft of the pump all
the way.
OPEN CLOSE
5) Screw the selected expander head onto the adapter.
OPEN CLOSE
6) Place the tubing onto the expander head. Make sure
that the expander head travels into the tube FREELY.
WARNING!! Do not force or twist the tube while you
are placing the tube on the expander head.
OPEN CLOSE
WARNING
Wear Safety Goggles
WARNING Wear Safety Goggles

3
7) Tighten the relief valve knob and pump handle until
tubing is expanded and pump handle becomes firm.
OPEN CLOSE
8) Loosen the relief valve knob to release the finished
tubing. If the tube does not release from the die head
because of tube configuration or burrs, unscrew the
adapter and die head (together) from the pump body.
OPEN CLOSE
PARTS LIST
PART# DESCRIPTION TUBE O.D.
71600-03 Expander Head 3/8”
71600-04 Expander Head 1/2”
71600-05 Expander Head 5/8”
71600-06 Expander Head 3/4”
71600-07 Expander Head 7/8”
71600-08 Expander Head 1”
71600-09 Expander Head 1 1/8”
71600-11 Expander Head 1 3/8”
71600-13 Expander Head 1 5/8”
71600-17 Expander Head 2 1/8”
71601-A Hydra-Swage
71601-D Adapter for 71601
71685 Inner - Outer Reamer
71600-PB Molded Box for 71600 & 71650
METRIC
PART# DESCRIPTION TUBE O.D.
71600-10M Expander Head 10mm
71600-12M Expander Head 12mm
71600-15M Expander Head 15mm
71600-16M Expander Head 16mm
71600-18M Expander Head 18mm
71600-22M Expander Head 22mm
71600-28M Expander Head 28mm
ALSO AVAILABLE
71600-002 Expander Head 1/4”
71680 Hydraulic Flaring Accessory
• Make OEM flares with a simple pump
of the handle.
99 Washington Street
Melrose, MA 02176
Phone [phone]
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com