Thank
you
very much for choosing
an
Master Mechanic product! For future reference, please
complete the owner's record below:
Item
#:
Purchase Date: _
Save the receipt, warranty and these instructions. It is important that
you
read the entire manual to
become familiar with this product before you begin using
it.
INTENDED USE
Store idle jack. When jack
is
not
in
use, store it
in
asecure place out
of
the reach
of
children.
Inspect it for good working condition prior to storage and before re-use.
SAVE THESE INSTRUCTIONS
ASSEMBLY
This jack is designed for certain applications only. The distributor cannot
be
responsible for issues
arising from modification. We strongly
reco~mend
this jack not be modified and/or used for any
application other than that for which it was designed. If
you
have any questions relative to aparticular
application, DO NOT use the jack until
you
have first contacted the distributor to determine if it can or
should be performed
on
the product.
This marine swivel jack with sturdy 2" tube is reliable and very easy to use. The sidewind intemal gear
design with large, grooved comfort handle makes cranking easy. while adeep-seated snap ring adds
side load capacity. The
112"
pull pin activates the swivel mechanism, allowing
you
to swing the jack
up
and out
of
the way when not
in
use.
1.
When mounting trailer
jack
it is best to hook up to the
tow
vehicle to make ure trailer is secure.
2. Mount
jack
based on drawing shown (to the left).
3.
Make sure bolts and nylock
nut
are securely tightened.
(Regularly check to
make
sure bolts and nylock nuts are
securely tight.)
4. After
jack
is mounted to trailer, attach handle assembly to
jack
with bolt fastener provided.
GENERAL SAFETY RULES
.&WARNING
Read and understand
all
instructions. Failure to follow all instructions listed below may result
in
serious injury.
Owner must ensure that the jack
is
installed according to these instructions
Never position any part
of
body under this product or supported load.
Fully retracVrotate jack before towing.
This jack
is
not intended for use as atransport device. Minimize movement
of
the implement
while the jack
is
under load.
Do not allow children to play
on
or around this jack while supporting aload.
Secure the load, vehicle and trailer form rolling when operating jack.
Never attempt to lift or support loads
in
excess
of
the rated strength of this trailerjack.
This jack is designed for vertical loading. Excessive side forces may cause failure and or injury.
Before moving trailer crank jack to its lowest position.
This jack is not designed for round tongues.
Do not weld bolt-on brackets or strap to the tongue.
Do not modify the jack
in
any way. Unauthorized modification may impair the function and/or
safety and could affect the life
of
the equipment. There are specific applications for which the
jack was designed.
The swivel
is
very strong. However abuse, corrosion or damage may cause swivel to break.
Regularly inspect the swivel for damage and discontinue use ifthe swivel is damaged.
Page 2
of4
OPERATION
1.
To
activate the swivel function
on
the jack, pull the pin and swivel jack into desired position.
2.
Only swivel jack when trailer is securely attached
to
atow vehicle. Make sure pull pin is properly
engaged after
SWiveling
into desired position.
MAINTENANCE
Maintain
your
Jack.
It is recommended
that
the general condition
of
any
jack
be examined
before it is used. Keep your
jack
in
good repair by adopting aprogram
of
conscientious repair
and maintenance.
If
jack is damaged, discontinue use
of
the jack.
This jack is pre-greased for easy operation. This jack includes agrease zerk for easy lubrication as
needed.
The attachment and installation
of
this product is beyond the control
of
True Value Company. True
Value Company
is
not liable for damages and/or injuries that are the result
of
improper use/
attachment or are the result
of
use beyond the intended towing application. The liability
of
this product
is limited to the purchase price
if
it proves to
be
defective
in
material and/orworkmanship. Any
and
all
warranties, explicit or implied, are void
if
product is damaged or worn.
Page 3
of4
