MasterCraft 058-9852-2 User manual

headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
model no. 058-9852-2
IMPORTANT:
Please read this manual carefully before running this multi-purpose
inflator and save it for reference.
INSTRUCTION
MANUAL
MULTI-PURPOSE INFLATOR

3
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
model no. 058-9852-2 | contact us 1-800-689-9928
2
Mastercraft is Canadian Tire’s exclusive line of reliable and hardworking hand tools,
power tools and hardware products. Designed for the DIY customer but with the
features and benefits of the leading professional series tools, there are over 100
practical and powerful products available under 6 different categories including;
Stationary Power Tools, Handheld Power Tools, Hand Tools, Air Tools, Tool/Garage
Storage, and Other Hardware accessories. Now more than ever, Canadians can
tackle just about any project around the house or garage with confidence using a
Mastercraft product!
CanadianTire.ca
NOTE:
If any parts are missing or damaged, or if you have any questions, please call our
toll-free helpline at 1-800-689-9928.
SAVE THESE INSTRUCTIONS
This manual contains important safety and operating instructions. Read all
instructions and follow them with use of this product.
TABLE OF CONTENTS
SPECIFICATIONS 4
SAFETY GUIDELINES 5
KEY PARTS DIAGRAM 9
SETUP 10
OPERATING INSTRUCTIONS 11
MAINTENANCE 13
TROUBLESHOOTING 13
PARTS LIST 14
WARRANTY 16
TABLE OF CONTENTS

model no. 058-9805-6 | contact us 1-800-689-9928
4 5
headline bars
continuation tabs
notes
warnings
model no. 058-9852-2 | contact us 1-800-689-9928
SPECIFICATIONS
SPECIFICATIONS
Power 120 V 60 Hz 1.5 A
Motor speed 3940 RPM
Maximum pressure (PSI) 150
Air delivery 2.0 CFM
Air outlet size 5/16" (7 mm)
Power cord 6' (1.8 m)
Weight 5 lb 12 oz (2.6 kg)
SAFETY GUIDELINES
WORK AREA SAFETY WARNINGS
• Keep work area clean and well-lighted. Cluttered or dark areas invite accidents.
• Do not operate the inflator in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Inflator motors produce sparks which may ignite the dust or fumes.
• Keep children and bystanders away from an operating inflator.
ELECTRICAL SAFETY WARNINGS
• Inflator plug must match the outlet. Never modify the plug in any way. Do not use any
adaptor plug with grounded inflator. Standard plug and matching outlets will reduce risk of electric
shock.
• Do not expose inflator to rain or wet conditions. Water entering an inflator will increase the risk
of electric shock.
• Do not abuse the cord. Never use the cord for unplugging the inflator. Keep cord away from
heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric
shock.
PERSONAL SAFETY WARNINGS
• Stay alert, watch what you are doing and use common sense when operating this inflator.
Do not use this inflator while you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating an inflator may result in serious personal injury.
• Use personal protective equipment. Always wear ANSI-approved eye protection during
setup and use.
• Prevent unintentional starting. Ensure the switch is in the off position before connecting to
power source or moving the inflator.
SAFETY GUIDELINES
WARNING!
Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire
and/or serious injury. Save all warnings and instructions for future reference.
CAUTION!
The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and
situations that may occur. It must be understood by the operator that common sense and caution are factors that cannot be
built into this product, but must be supplied by the operator.

headline bars
continuation tabs
notes
warnings
model no. 058-9852-2 | contact us 1-800-689-9928
76
SAFETY GUIDELINES SAFETY GUIDELINES
INFLATOR SAFETY GUIDELINES
• Thismulti-purposeinflatorisdesignedtoinflatecartires,biketires,ATVtires,sportsequipments,air
mattresses, beach toys and other inflatables. It is intended for consumer use only. Do not use for any
purpose other than inflating. Otherwise, bodily harm and/or personal injury may occur.
• Do not leave compressor unattended for an extended period while plugged in. Unplug
compressor after each use.
• Keep compressor well-ventilated. Do not cover compressor during use.
• Inflatorheadgetshotduringoperation.Do not touch it or allow children nearby during or
immediately following operation.
• Allowinflatortocooldown5minutesaftereach3minutesofcontinuousoperationat100PSI.
• Donotover-inflate.Followthemanufacturer’sinstructionsfortheitemyouareinflating.
• Donotusetheairhosetomovetheinflator.Donotcarrytheinflatorbytheairhoseorpowercordas
damage may occur.
• Donotoperatetheinflatorinwetordampareas.
• Operatetheinflatoronlywiththeattachmentsthatareincluded.The use of accessories or
attachments not recommended by the manufacturer may result in a risk of injury to
persons.
• USESAFETYGLASSES. Also use face or dust mask if operation is dusty.
• Thisproductmustbegrounded.SeetheGROUNDING INSTRUCTIONS hereof.
• Maintainlabelsandnameplatesontheinflator.Thesecarryimportantsafetyinformation.Ifunreadable
or missing, contact the customer service for a replacement.
• Peoplewithpacemakersshouldconsulttheirphysician(s)beforeuse.Electromagneticfieldsinclose
proximity to heart pacemaker could cause pacemaker interference or pacemaker failure.
• Thebrasscomponentsofthisproductcontainlead,achemicalknowntocausebirthdefectsorother
reproductive harm.
GROUNDING INSTRUCTIONS
IN THE EVENT OF A MALFUNCTION OR BREAKDOWN, grounding provides a path of least resistance for
electriccurrenttoreducetheriskofelectricshock.Thisinflatorisequippedwithanelectriccordhavingan
equipment-groundingconductorandagroundingplug.Theplugmust be plugged into a matching outlet
that is properly installed and grounded in accordance with all local codes and ordinances.
DO NOT MODIFY THE PLUG PROVIDED — if it will not fit the outlet, have the proper outlet installed by a
qualifiedelectrician.
IMPROPER CONNECTIONoftheequipment-groundingconductorcanresultinariskofelectricshock.
The conductor with insulation having an outer surface that is green with or without yellow stripes is the
equipment-groundingconductor.Ifrepairorreplacementoftheelectriccordorplugisnecessary,donot
connecttheequipment-groundingconductortoaliveterminal.
CHECKwithaqualifiedelectricianorservicepersonnelifthegroundinginstructionsarenotcompletely
understood, or if in doubt as to whether the compressor is properly grounded.
USE ONLY 3-WIRE EXTENSION CORDSthathave3-pronggroundingplugsand3-polereceptaclesthat
accept the inflator’s plug.
Repair or replace damaged or worn cord immediately.
This inflator is intended for use on a circuit that has an outlet that
looks like the one illustrated above in 120 V~ 3-PRONG PLUG AND
OUTLET. The inflator has a grounding plug that looks like the plug
illustrated above in 120 V~ 3-PRONG PLUG AND OUTLET.
The outlet must be properly installed and grounded in accordance
with all codes and ordinances.
Do not use an adaptor to connect this inflator to a different outlet.
WARNING!
TO PREVENT ELECTRIC SHOCK AND DEATH FROM INCORRECT GROUNDING WIRE CONNECTION:
Checkwithaqualifiedelectricianifyouareindoubtastowhethertheoutletisproperlygrounded.
Do not modify the power cord plug provided with the inflator.
Never remove the grounding prong from the plug. Do not use the inflator if the power cord or plug is damaged. If damaged,
haveitrepairedbyaservicefacilitybeforeuse.Iftheplugwillnotfittheoutlet,haveaproperoutletinstalledbyaqualified
electrician.
2
3
1
1 3-pronged plug 2 Properly grounded outlet
3 Grounding prong
WARNING!
Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or
serious injury. Save all warnings and instructions for future reference.

9
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
model no. 058-9852-2 | contact us 1-800-689-9928
8
SAFETY GUIDELINES KEY PARTS DIAGRAM
KEY PARTS DIAGRAM
No. Description
AMulti-purposeinflator
B Carrying handle
C Pressure gauge
D Inflator air outlet
E Rubber air hose
F On/Off switch
G Power cord
H Power cord plug
No. Description
I Recoil air hose
JLock-ontirechuck
K Quick connect coupler
L Mattress nozzle
M Sports ball needle
N Presta valve adaptor
O 5 High flow accessories
INFLATION
DEFLATION
F
G
H
O
N
E
M
L
B
A
J
I
K
C
D
GUIDELINES FOR USING EXTENSION CORDS
Verify that the extension cord is in good condition. When using an extension cord, be sure to use one that
is heavy enough to carry the current that the tool will draw. An undersized cord will cause a drop in line
voltage, which will result in loss of power and overheating. The table below shows the correct size to use
according to cord length and the amperage rating on the tool’s nameplate. When in doubt, use the next
heavier gauge. The smaller the gauge number, the heavier the cord.
Verify that the extension cord is properly wired and in good condition. Always replace a damaged extension
cord,orhaveitrepairedbyaqualifiedelectricianbeforeusingit.Keepextensioncordsawayfromsharp
objects, excessive heat, and damp or wet areas.
INFLATOR USE AND CARE SAFETY WARNINGS
• Do not use the inflator if the switch does not turn it on and off. Any inflator that cannot be controlled
with the switch is dangerous and must be repaired.
• Disconnecttheplugfromthepowersourcebeforemakinganyadjustments,changingaccessories,or
storing the inflator. Such preventive safety measures reduce the risk of starting the inflator accidentally.
• Storeanidleinflatoroutofthereachofchildrenanddonotallowpersonsunfamiliarwiththeinflator
or these instructions to operate it. An inflator is dangerous in the hands of untrained users.
• Maintaintheinflator.Keeptheinflatorcleanforbetterandsaferperformance.Keepdry,cleanandfree
from oil and grease. Check for misalignment or binding of moving parts, breakage of parts and any
other condition that may affect the inflator’s operation. If damaged, have the inflator repaired before
use. Many accidents are caused by a poorly maintained inflator.
• Usetheinflatorinaccordancewiththeseinstructions,takingintoaccounttheworkingconditionsand
the work to be performed. Use of the inflator for operations different from those intended could result
in a hazardous situation.
SERVICE SAFETY WARNINGS
• Haveyourinflatorservicedbyaqualifiedrepairpersonusingonlyidenticalreplacementparts.Thiswill
ensure that the safety of the inflator is maintained.
Amperage rating of the tool
(120 V circuit only)
Total length of the extension cord
25’ (7.6 m) 50’ (15.2 m) 100’ (30.4 m) 150’ (45.7 m)
More than Not more than Minimum gauge for the extension cord (AWG)
0 6 18 16 16 14
6 10 18 16
10 12 16 16
12 16 14 12
Do not use
Do not use
Do not use
WARNING!
If any part is missing or damaged, do not use the product until the missing or damaged part has been replaced.
WARNING!
This product must be grounded while in use in order to protect the operator from electric shock.

model no. 058-9805-6 | contact us 1-800-689-9928
10 11
headline bars
continuation tabs
notes
warnings
model no. 058-9852-2 | contact us 1-800-689-9928
SETUP OPERATING INSTRUCTIONS
SETUP OF THE INFLATOR
1. Place the inflator (A) evenly on flat surface.
2.Connecttherecoilairhose(I)totheinflatorbypullingbackthequickconnectcoupler(K)andinsertingit
ontothefittingattheendoftherubberhose(E).Pushfirmlyandreleasethequickconnectcoupler—you
willhearaclickwhenthequickconnectcouplerisattachedontothefittingsecurelyandinplace.
3.Insertthepowercordplug(H)intothenearest120-volt,grounded,electricaloutlet.
4. Turn on the On/Off power switch (F) and inspect the air connections for leaks.
5. Turn off the On/Off power switch and unplug the inflator, then repair any leaks found.
IMPORTANT: This inflator operates only on AC 120 Volt. Do not attempt to operate this inflator with any
other source or voltage. Do not rewire or reconfigure the inflator from its original design or personal injury
and/or bodily harm may occur.
SETUP OF INFLATOR AREA
1.Designateaworkareathatiscleanandwell-lighted.Theworkareamustnotallowaccessbychildrenor
pets to prevent injury.
2. Locate the inflator on a flat, level surface to prevent damage to the unit. Keep at least 12" (30 cm) of
space around the unit to allow air circulation.
3. Route the power cord from the inflator to the grounded wall outlet, along a safe path without creating a
tripping hazard or exposing the power cord to possible damage.
OPERATING INSTRUCTIONS
IMPORTANT: Before operation, follow all the instructions in the SETUP section.
IMPORTANT: Inflation time may vary depending on size of tire, climate, temperature and voltage level of
vehicle/internal battery.
TO INFLATE ITEM:
1. Plug the inflator power cord (G) into a grounded 120 Volt outlet.
2.Connectthelock-ontirechuck(J)tothetireairvalve.Unlockthetirechuckbypullingthechucktabup.
Lock the tire chuck once it is fixed to the tire valve. Make sure that the tire chuck is attached to the tire
valve stem tightly and securely.
3. Turn on the On/Off switch (F) of the inflator (A). Monitor the PSI on the pressure gauge (C) to fill your item
to the desire pressure.
4. Turn the inflator off once the desired air pressure in the tire has been reached.
5. Remove the tire chuck (J) from the tire valve stem.
6. Unplug the inflator after use.
IMPORTANT:Wheninflatingbiketires,sportsequipmentsandairmattresses,usethePrestavalveadaptor
(N), sports ball needle (M), or mattress nozzle (L) as needed. Insert it to the central hole of the tire chuck (J)
before inflation.
IMPORTANT:Thisinflatorfeaturesapressuregauge(C)withglow-in-the-darkdisplayforeasyreadingof
tire pressure during the inflation process.
USE OF 5 HIGH FLOW ACEESSORIES
IMPORTANT: The high air accelerator kit is a great device for inflating or deflating air mattresses, small
boats, inflatable toys and a variety of other items which use a large volume of low pressure air.
IMPORTANT: The attachments are not to be used with automobile tires, bicycle tires, sports balls, or any
other high pressure inflatables.
IMPORTANT: The high flow air accelerator kit comes with three nozzles of varying sizes, an air accelerator
body and an enlargement collar to prevent the air from leaking out of the inflatable when it is being filled.
WARNING!
•Readtheentireimportantsafetyinformationattheabovesectionof“SAFETYGUIDELINES”beforesetuporuseofthisproduct.
•Topreventseriousinjuryfromaccidentaloperation,turnthepowerswitch“Off”andunplugtheinflatorfromitselectricaloutlet
before assembling or making any adjustments to the inflator.
•Beforeoperating,makesuretheinflatorissetupinawell-ventilatedarea,onaflat,level,solidsurfacewellawayfromany
flammable objects, such as drapes. Never operate without proper ventilation, or near possible ignition sources.
WARNING!
•Donotover-inflatetheitembeinginflated.Monitorairpressure(PSI)atalltimesduringtheinflationprocessbyobserving
the pressure gauge on the inflator.
•Topreventseriousinjuryfrominflatorfailure,doNOTusedamagedequipment.Ifabnormalnoiseorvibrationoccurs,have
the problem corrected before further use.
•Topreventseriousinjuryfromaccidentaloperation,turnthepowerswitch“OFF”andunplugtheinflatorfromitselectrical
outlet before performing any inspection, maintenance, or cleaning procedures.
•Ifthepowercordofthisinflatorisdamaged,itmustbereplacedonlybyaqualifiedtechnician.

13
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
model no. 058-9852-2 | contact us 1-800-689-9928
12
OPERATING INSTRUCTIONS
To Inflate:
1. Select the best fitting nozzle for your inflatable and install it on the end of the air accelerator body. Use
theenlargementcollarwiththelargestnozzlewhentheairinletoftheinflatableisextra-large.
2. The air accelerator body can be used without any of the accessory nozzles if the valve in the inflatable is
large enough.
3. Attach the tire chuck (J) from the inflator onto the threaded side inlet nipple of the air accelerator body.
Theoutlettubesontheairacceleratorbodyaremarked“INFLATE”and“DEFLATE”.Ifyouwishto
INFLATE, simply attach the correct size nozzle (small, medium, or large one) onto the inflation outlet and
put the other end of the nozzle into the valve of the inflatable to be inflated.
IMPORTANT: Many inflatables, especially air mattresses, have an internal flap that prevents air loss. Unless
this flap is displaced by the nozzle or end of the air accelerator body, the air mattress will not inflate or
deflate. Push the nozzle or end firmly into the valve to ensure that you push this flap out of the way to allow
proper airflow.
IMPORTANT: If you cannot get your inflatable firm enough to suit your needs, place your thumb directly over
the deflection outlet. This will allow more air to go directly into the inflatable. When inflating items such as
largerubberboats,etc.,itwillsometimesbenecessaryto“topoff”yourinflatablewithafootpumporlarge
volume hand pump.
To Deflate:
If you wish to DEFLATE, follow the same procedure as above using the deflation outlet which is marked
“DEFLATE”.
IMPORTANT: If you are purchasing an inflatable, keep in mind that the larger hole it has, the faster it can be
inflated and deflated.
MAINTENANCE
MAINTENANCE
1. Before each use, inspect the general condition of the inflator. Check for loose hardware, misalignment
or binding of moving parts, cracked or broken parts, damaged electrical wiring, and any other condition
that may affect its safe operation.
2. After use, wipe external surfaces of the inflator with a clean cloth.
3. Store the inflator in a clean, dry, safe location out of reach of children and other unauthorized people.
WARNING!
• Proceduresnotspecificallyexplainedinthismanualmustbeperformedonlybyaqualifiedtechnician.
• Topreventseriousinjuryfrominflatorfailure,donotusedamagedequipment.Ifabnormalnoiseorvibrationoccurs,have
the problem corrected before further use.
• Topreventseriousinjuryfromaccidentaloperation,turnthepowerswitchoffandunplugtheinflatorfromitselectrical
outlet before performing any inspection, maintenance, or cleaning procedures.
• Ifthesupplycordofthiscompressorisdamaged,itmustbereplacedonlybyaqualifiedservicetechnician.
Enlargement
Collar
Inflation Outlet Medium
Adaptor Nozzle
Small
Adaptor Nozzle
Large
Adaptor Nozzle
Deflation
Outlet
Air Accelerator
Body
Side Inlet Nipple
INFLATION
DEFLATION
HIGH FLOW AIR ACCELERATOR KIT DIAGRAM
TROUBLESHOOTING
Problem Possible Causes Likely Solutions
The motor does
not work.
1. No electrical power.
2. Damaged power cord.
3. Electrical wiring within the unit is
defective.
4. Power switch is defective.
1. Plug the power cord into a working,
120V~, grounded, electrical outlet.
2.Haveaqualifiedservicetechnician
replace the power cord.
3.Haveaqualifiedservicetechnician
replace electric wiring.
4.Haveaqualifiedservicetechnician
replace power switch.
The motor runs,
but it makes
irregular noises or
a knocking noise.
1. Bearing is loose or damaged.
2. Screws in the connection rod are loose.
1.Haveaqualifiedservicetechnician
replace the bearing.
2. Tighten the screws, or replace them
if necessary.
Not enough
pressure.
1. Loose air connection(s).
2. Air hose is damaged.
3. Screws on cylinder cover are loose.
1. Check all air connections, and tighten
them if necessary
2. Replace air hose.
3. Tighten screws.
Motor runs
properly, but no air
pressure or lack
of air delivery.
1. Valve plate is loose or out of place.
2. Retainer ring is damaged after
excessive use at high pressure.
1. Open the front cover and make
sure the valve plate is in the proper
position. Tighten the screws if
necessary.
2.Haveaqualifiedservicetechnician
replace the retainer ring.
TROUBLESHOOTING

headline bars
continuation tabs
notes
warnings
15
model no. 058-9805-6 | contact us 1-800-689-9928
14
headline bars
continuation tabs
notes
warnings
model no. 058-9852-2 | contact us 1-800-689-9928
PARTS LIST
NOTE:
The manufacturer and/or distributor has provided the parts list and assembly diagram in this manual as a reference tool only. Neither the manufac-
turer or distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or
that he or she is qualified to replace any parts of the product. In fact, the manufacturer and/or distributor expressly states that all repairs and parts
replacements should be undertaken by certified and licensed technicians, and not by the buyer. The buyer assumes all risk and liability arising out of
his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts thereto.
EXPLODED VIEW
4
3
2
1
9
10
11
12
13
14
15
16
17
18
19
20 21
22 23 24 25 26
27
28
29
30 31
32 33
34
35 36
37
38
39
40
41 42 43 44 45 46 47 48 49 50 51 52 53 54 55
56
58
57
59
27
8
5
6
7
PARTS LIST
No. Description Qty.
1 Screw 2
2 Cylinder cover 1
3 Screw 4
4 Cylinder 1
5 Seal ring 1
6 Screw 1
7 Gasket 1
8 Air exhaust slice 1
9 Seal ring 1
10 Intake valve slice 1
11 Seal ring 1
12 Press ring 1
13 Piston ring 1
14 Cylinder liner 1
15 Radiator sleeve 1
16 Fixing plate 1
17 Air intake slice 1
18 Connecting rod 1
19 Bearing 1
20 Screw 4
21 Front cover (1) 1
22 Shockproof pad 4
23 Offset wheel 1
24 Front cover (2) 1
25 Bearing 1
26 Fixed stud 2
27 Motor 1
28 Screw 2
29 End cover 1
30 Screw 4
No. Description Qty.
31 Wire nail 1
32 Switch 1
33 Blade terminal 1
34 Wire 1
35 Wire nail 1
36 AC plug 1
37 Pressure gauge 1
38 Locking ring 2
39 Rubber hose 1
40 Quick connector 1
41 Screw 2
42 Set ring 1
43 Motor housing 1
44 Screw 1
45 Magnetic tile 2
46 Blade 1
47 Rotor 1
48 Set ring 1
49 Bearing 1
50 Brush holder 1
51 Brush holder bushing 2
52 Spring 2
53 Brush 2
54 Brush holding plate 2
55 Screw 4
56 Air nozzle 1
57 Air hose 1
58 Quick connector 1
59 Accessories 8

headline bars
continuation tabs
notes
warnings
17
model no. 058-9805-6 | contact us 1-800-689-9928
16
headline bars
continuation tabs
notes
warnings
model no. 058-9852-2 | contact us 1-800-689-9928
Additional Limitations
This warranty applies only to the original purchaser and may not be transferred. Neither the retailer nor
the manufacturer shall be liable for any other expense, loss or damage, including, without limitation, any
indirect,incidental,consequentialorexemplarydamagesarisinginconnectionwiththesale,useorinability
to use this product.
Notice to Consumer
This warranty gives you specific legal rights, and you may have other rights, which may vary from province
to province. The provisions contained in this warranty are not intended to limit, modify, take away from,
disclaim or exclude any statutory warranties set forth in any applicable provincial or federal legislation.
Made in China
Imported by
Mastercraft Canada Toronto, Canada M4S 2B8
WARRANTY
3-Year Limited Warranty
This Mastercraft product is guaranteed for a period of three (3) years from the date of original retail
purchase, against defects in materials and workmanship.
Subject to the conditions and limitations described below, this product, if returned to us with proof of
purchase within the stated warranty period and if covered under this warranty, will be repaired or replaced
(withthesamemodel,oroneofequalvalueorspecification),atouroption.Wewillbearthecostofany
repair or replacement and any costs of labour relating thereto.
These warranties are subject to the following conditions and limitations
a) a bill of sale verifying the purchase and purchase date must be provided;
b) this warranty will not apply to any product or part thereof which is worn or broken or which has become inoperative
due to abuse, misuse, accidental damage, neglect or lack of proper installation, operation or maintenance
(as outlined in the applicable owner’s manual or operating instructions) or which is being used for industrial,
professional, commercial or rental purposes;
c) this warranty will not apply to normal wear and tear or to expendable parts or accessories that may be supplied with
the product which are expected to become inoperative or unusable after a reasonable period of use;
d) this warranty will not apply to routine maintenance and consumable items such as, but not limited to, fuel, lubricants,
vacuumbags,blades,belts,sandpaper,bits,fluids,tune-upsoradjustments;
e) this warranty will not apply where damage is caused by repairs made or attempted by others (i.e., persons not
authorized by the manufacturer);
f) this warranty will not apply to any product that was sold to the original purchaser as a reconditioned or refurbished
product (unless otherwise specified in writing);
g) this warranty will not apply to any product or part thereof if any part from another manufacturer is installed therein or
any repairs or alterations have been made or attempted by unauthorized persons;
h) this warranty will not apply to normal deterioration of the exterior finish, such as, but not limited to, scratches, dents,
paint chips, or to any corrosion or discolouring by heat, abrasive and chemical cleaners; and
i) this warranty will not apply to component parts sold by and identified as the product of another company, which shall
be covered under the product manufacturer’s warranty, if any.
WARRANTY