Masterpro MPTORCH2 User manual

(THIS BLOWTORCH IS SUPPLIED EMPTY AND WILL
NEED FILLING BEFORE USE)
Instructions for use
It is important to read these instructions carefully and
familiarise yourself with the product before lighting or
using. Reread the instructions periodically to refresh your
memory. Retain these instructions for future use.
Turning Off/Safety Lock
Turn the gas flow control knob completely clockwise to
shut off the flame.
Always slide the locking lever to ‘lock’ when not in use.
When in storage, the blowtorch SHOULD always be in the
‘lock’ position.
WARNING
KEEP AWAY FROM CHILDREN
1. IMPORTANT AFTER EACH FILLING, WAIT FOR TWO
MINUTES BEFORE USE TO ALLOW GAS TO STABILISE
AND FOR VAPOUR TO DISSIPATE.
2. Read directions before use.
3. Only use primary branded aerosol butane gas.
4. Keep the nozzle clean from dust and do not drop the
torch as these are normal causes for malfunction.
5. Do not store under direct sunlight or any place where
temperatures will exceed 4O°C.
6. Do not touch flame guard when hot.
7. Butane gas is extremely flammable. Please
handle with care.
8. Always point away from face and clothing when
igniting and operating.
9. Make sure the flame adjuster is firmly closed and flame
is completely extinguished after each use.
10. After use allow torch to cool down before storing.
11. Do not continually use this tool for over 1 hour.
12. Never puncture or dispose of in a fire.
13. Read and follow all instructions and cautions on the
fuel canister
14. Do not use to light cigarettes, cigars or pipes.
15. Never loosen or tamper with the filling valve on the
base of the torch.
16. If stored for long periods of time without use, please
safely vent all gas from the blowtorch prior to storage.
This should be done outside away from any source of
ignition.
17. When filled, contains flammable gas under pressure.
18. Never carry a blowtorch in hand luggage or hold lug-
gage on to a plane.
19. Whilst the adjustable anti-flare flame works at any
angle, please refrain from pointing flame directly
downward, as built up heat may cause damage to the
unit. We advise an operation angle of 45° down.
TEMPREATURE CONTROL
The blue part of the flame is the hottest. A simple way of
controlling temperature is the distance of the blue flame to
the object you are heating. If you need gentle heat this can
be obtained by distance.
OPERATING INSTRUCTIONS
NOTE: Primary branded aerosol butane gas can be bought
from most newsagents and tobacconists, also from tobac-
conist’s counters in leading supermarkets.
GAS FILLING
Always fill outdoors in a well ventilated area.
Only use primary branded aerosol butane gas.
Make sure the on/off gas flow control knob is in the ‘off’
position. To do this, turn clockwise fully to the ‘-‘sign on
the blowtorch.
Turn the unit upside down and insert fill stem into fill valve
and press down for 3-4 seconds, repeat three times. Back
spray from fill valve indicates that appliance is full.
After filling, allow two minutes for the gas to stabilise.
Always read and follow all instructions and cautions on the
fuel canister.
IGNITING
Slide the safety lock to the ‘off’ position.
Turn gas flow control knob anti-clock wise in a 2/3 circle.
Gas will flow with a hissing sound from flame guard.
Press ignition button to ignite flame. Slide the safety lock
to the lock on position.
Do not add attachments to the end of the gas refill canister
as the valve is designed to accept the gas direct from the
gas can without adaptors added. (These adaptors usually
provided for cigarette lighters.)
FLAME ADJUSTMENT
Adjust the flame length during use by turning the gas flow
control knob.
Adjust the flame intensity/width during use by sliding the
flame adjuster as far left as possible.
DELUXE
COOKS
BLOWTORCH

FLAME GUARD
SAFETY
STAND
FLAME ADJUSTER
AIR VENT
GAS FLOW
CONTROL KNOB
SAFETY LOCK
IGNITION
BUTTON
www.master-pro.com.au