SPORTS AFIELD PRESERVE SA72-60WD User manual

IMPORTANT:
Please read this information and follow all safety rules carefully before
operating your gun safe. Failure to do so will void your warranty.
052219
PRESERVE SA72-60WD INSTRUCTION MANUAL

www.sportsafieldsafes.com 1
PLEASE READ THIS INFORMATION CAREFULLY BEFORE OPERATING YOUR SPORTS
AFIELD SAFE.
DO NOT LOCK THIS MANUAL OR THE OVERRIDE ACCESS KEYS IN YOUR SAFE.
Thank you for choosing a Sports Afield Safe to protect your valuables. We are
commied to securing, organizing and protecng your most important documents,
valuables and keepsakes.
Your safe is built to last a lifeme. However, please understand that the locking
mechanism has precision parts. If you experience ANY difficulty opening or closing
your safe, DO NOT FORCE THE SAFE OPEN. Doing so may jam the
components in the lock, which will require a safe technician to unlock your safe.
This causes an inconvenience for you, and may lead to a claim denial.
If you experience problems or challenges with your safe, please contact us.
Many issues can be quickly resolved without the product being returned.
Customer Service - [phone]
DISCLAIMER - READ BEFORE SAFE SETUP
If you choose to ulize this safe to store a weapon always follow proper weapon
and local laws when storing a weapon.
SA Consumer Products strongly recommends that you do not store loaded guns.
Always follow the firearm safety rules set out by the firearm’s manufacturer.
A Cascade Pro Safe or any other firearm storage device cannot take the place
of other safety procedures including advising children of the dangers of
firearms.
SA Consumer Products and its distributors of the Sports Afield Safes do not
recommend, suggest, advise, promote, or otherwise condone the ownership or use
of firearms. We believe the decision to own or use a firearm is a serious decision
that should only be made by an adult who has carefully considered the risks and
benefits of such a decision.
Safe bodies and doors are extremely heavy thus SA Products Requires a minimum of
two people to insure stability of the safe durring installaon. Always ensure proper
installaon, as laid out in this manual, and do not open the door with the safe on an
uneven or unstable floor. Ignoring this could result in serious injury or death.
WEAPON STORAGE
SAFETY
Keep a record of your combinaon number in a secure place, away from children,
and separate from your safe. You will need this informaon along with your proof
of purchase to obtain technical assistance and replacement keys.

www.sportsafieldsafes.com 2
IMPORTANT INFORMATION........................................................................................1
1REGISTRATION....................................................................................................3
2 UNDERSTANDING YOUR SAFE ............................................................................4
3INSPECTION .....................................................................................6
4
OPENING YOUR SAFE..........................................................................................7
E-LOCK BATTERY INSTALLATION ........................................................8
7
E-LOCK SECURITY CODE SETUP
..........................................................................10
LOCKED OUT OF YOUR SAFE
8
PROPER PLACEMENT AND MOVEMENT OF SAFE
SECURING YOUR SAFE ......................................................................................
LOADING YOUR SAFE........................................................................................
KEEPING SAFE DRY ................................................................ ...........................
MAINTAINING HINGES AND INTERNAL MECHANISM
......................................
13
TABLE OF CONTENTS
...................
UNBOXING .....................................................................................6...................
5
6
LOW BATTERY WARNING .......................................................9
.................
............................
11
..............................................................................
9
12
13
15
16 14
14
14
............................................. 11
14
THIS MANUAL SERVICES THE FOLLOWING STYLE NUMBERS
E-LOCK QUIET MODE ........................................................................................
11 11
ANTI THEFT ALERT ALARM SYSTEM ...............................................................
10 11
SA72-60WD

Please ensure you register your safe by vising our website. Locate the
“contact’ buon located on the top herader on the home page. Select registraon
from the drop down menu.
www.sportsafieldsafes.com
By registering your Sports Afield Safe we will be able to expedite and address
any problems or challenges you may have which would otherwise require a notary
leer and proof of payment.
REGISTRATION INFORMATION
The informaon you record onto this page will be required in the event you cannot
access the contents of your Sports Afield Safe. Please fill out all the required
informaon below and retain for your records and safe keeping.
PLEASE HAVE THIS INFORMATION READY PRIOR TO CALLING FOR TECHNICAL
ASSISTANCE AT:
Customer Service - [phone]
PURCHASE DATE:
PURCHASE PRICE (BEFORE TAX):
MODEL NUMBER:
SERIAL NUMBER:
KEY NUMBER (IF APPLICABLE):
OM_GS_0218 www.sportsafieldsafes.com 3
1. REGISTRATION
RETAILER PURCHASED AT:

www.sportsafieldsafes.com 4
2. UNDERSTANDING YOUR SAFE
EXTERIOR (Closed)
1 2 34
58
7
6
#
0
9
*
Standard
E-Lock
Override
Key Entry
(underneath
key pad)
External
Hinges
Handle

www.sportsafieldsafes.com 5
UNDERSTANDING YOUR SAFE (Continued)
INTERIOR (Open)
Battery
Location
Fully Wrapped
Adjustable Shelf
Bolt Down
Hole
Reset
Button
Adjustable
Shelf Rails
Top Shelf
Locking
Bolts
Deluxe
Door
Organizer

Make sure to inspect your safe for shipping damage before accepng delivery.
If you find any damage, please contact the delivery company (or carrier) immediately.
Any damage not noted upon delivery must be reported within fieen (15) days or
there will be no recourse. Any noted damage at the me of delivery must be
resolved with the delivery company and/or retailer. Shipping damage is not
warrantable by SA Products.
www.sportsafieldsafes.com 6
3. INSPECTION
WARNING: SAFES ARE HEAVY AND CAN BE UNSTABLE ON UNEVEN
GROUND. PLEASE ENSURE EXTRA CAUTION WHEN DEALING WITH OR MOVING
UNSECURED SAFES. WHILE UNBOXING BE SURE TO HAVE A SECOND PERSON
HOLD AND STABILIZE THE SAFE TO KEEP IT FROM TIPPING, CAUSING INJURY,
AND/OR DAMAGE TO THE SAFE AND SURROUNDING STRUCTURES.
Remove the packaging. Carefully remove the box , ensuring not
to damage the safe and/or injury yourself. You will want to have someone
stabilize the safe when removing the cardboard and other packing material from
underneaththe safe.
4. UNBOXING

9
*
1234
58
7
6
#
0
9
*
1234
58
7
6
#
0
9
*
www.sportsafieldsafes.com 7
1. Locate the override keys and
single handle spoke inside
the plasc bag hanging on
the front of the safe.
3. Locate the circular keyhole
in the backer plate.
Insert and turn the key
clockwise from 12 to 3 o’clock
to unlock.
5. OPENING YOUR SAFE
Step 1
Step 2
Step 3
2. Gently remove the E-Lock from
the safe by first pushing in the
release tab on the boom of
lock face backer plate. Then
turning the lock face counter
clockwise unl the keypad
detaches from the mounng
plate on the door of the safe.
Allow the keypad to gently
hang from the wires.
CONTENTS:
USERS MANUAL
FAILSAFE KEY
9
*
1234
58
7
6
#
0
9
*
1234
58
7
6
#
0
9
*

9
*
1234
58
7
6
#
0
9
*
www.sportsafieldsafes.com 8
6. E-LOCK BATTERY INSTALLATION
OPENING YOUR SAFE (Continued)
Step 4
4. Turn the handle
clockwise unl the safe
dooropens. Once open,
turn the handle back to
it’s starng posion so
the bolts are open and
extended. Remove key.
Step 1
1.The E-Lock requires 4 x AA
alkaline baeries. Locate
the baery compartment
on the inside of the door
panel. Insert the baeries in
the proper orientaon and
order. Keypad will beep when
baeries are successfully
installed. Replace baery
cover.
AA
AA
AA
AA
Baery Box

www.sportsafieldsafes.com 9
WARNING: The baeries musty be inserted with the correct polarity. Exhausted
baeries must be removed from the product and discarded safely. Do not mix old
and new baeries. Do not mix alkaline or standard (carbon –zinc) baeries
Do not use rechargeable (nickel – cadmium) baeries.
2. Replace the E-Lock onto the
safe door by aligning the lock
face to the backer plate, and
turning clockwise unl you
feel the e-lock click into place.
Step 2
This E-Lock is equipped to alert you when the baeries are low by
illuminang the red light (center)on the keypad when the [#]sign
is pressed
Always test the baeries when installing or replacing. If the red
light comes on when a buon is pressed you know the baeries
are not fully charged.
7. LOW BATTERY WARNING
12 3 4
58 7
6
#09
*
Red = Low Baery
E-LOCK BATTERY INSTALLATION (Continued)
DO NO CLOSE DOOR
WITHOUT KEY IN HAND
1234
58
7
6
#
09
*

10
8. E-LOCK SECURITY CODE SETUP
?? ? ?
????
1.
2.
3.
4. Green = Successful Entry
DO NO CLOSE DOOR
WITHOUT KEY IN HAND
Important: It is necessary to re-program your safe with a new security code you have
personally selected to provide maximum household security. Be careful, in choosing
your new security code, you’ll want to be sure that you can operate the unit quickly
without making an error.
Key in the preset factory code [ 1 5 9 # ].
The right light will turn green. Turn the
handle to ensure bolts are acvated.
Once confirmed return handle to
starng posion to lock bolts out.
On the inside of the safe door, locate
the small brass cap. Unscrew and remove
the cap, you will now see the reset buon.
Press and release the reset buon You
will hear a beep. The yellow (le) light
on the E-lock will illuminate so that you
can enter your new code.
Enter your new 3 to 8 digit security
code while the yellow (le LED) light is
illuminated followed by the [ * ] symbol.
Keypad will beep twice aer pressing
the [ * ] symbol. Reenter new code, now
followed by the [ # ] symbol. The keypad
will flash yellow (le LED), beep twice,
then flash green (right LED).
While the safe door is sll open,
confirm your newly entered security
code. Confirm code by entering the
3-8 digit code followed by the [ # ]. If
successful you will hear two beeps and
the green light will illuminate, allowing
you to retract the bolts.
Note: Do not shut the safe door unl you have confirmed your new security code at least 3 mes to
ensure your code has been saved and you can open the door successfully If the code fails, the yellow
(le) light will flash and beep. Repeat the steps above unl successful.
Warning: If the incorrect security code is entered 3 mes you will have an automac lockout for
20 seconds before you can enter your code again. If 3 addional failed aempts are made, the keypad
will lockout for 10 minutes. Leave baeries in to go through lockout cycle. If baeries are removed
the mer will restart zero.
Brass Reset Buon Cover

1234
58
7
6
#
0
9
*
www.sportsafieldsafes.com 11
E-LOCK SECURITY CODE SETUP (continued)
Note: Do not shut the safe door unl you have confirmed your new security code at
least 3 mes to ensure your code has been saved and you can open the door succesfully
If the code fails, the yellow (le) light will flash and beep. Repeat the steps above unl
succesful.
Warning: If the incorrect security code is entered 3 mes you will have an automac
lockout for 20 seconds before you can enter your code again. If 3 addional failed
aemps are made, the keypad will lockout for 10 minutes. Leave baeries in to go
through lockout cycle. If baeries are removed the mer will restart zero.
Customer Service - [phone]
9. LOCKED OUT OF YOUR SAFE
In the event you have forgoen the security code your primary acon will be to use
your backup keys in order to gain access to your safe and follow the E-Lock Security
Setup Code instrucons, starng at step 2 of acvang the brass reset buon.
If you have lost your backup keys, you will need to contact customer service at the
number below. Proof of purchase is required to obtain keys.
11. E-LOCK QUIET MODE
1. To mute the E-Lock, enter the code [ * 6 3 3 ] .
2. To turn the sound back on, enter code [ * 6 6 ].
By acvang the E-lock quiet mode, the safe will no longer
make audible sound when interacng with safe, allow for
silent access.
By acvang the thealert alarm system, if the safe is
tampered with, the alarm will sound for 20 seconds.
To stop the alarm from sounding, enter your security
code or use the override key to open the safe and
remove the baeries.
1. To acvate, Press [ * 0 0 ] to acve the thealert alarm system.
2. Every me a correct security code is entered the alarm is de-acvated. To re
acve press [ * 0 0 ].
10. ANTI THEFT ALERT ALARM SYSTEM
1234
58
7
6
#
0
9
*

WARNING: SAFES ARE VERY HEAVY AND AWKWARD TO HANDLE. PLEASE USE
THE UTMOST CARE IN MOVING THE SAFE. UTILIZING A TRAINED PROFESSIONAL
WITH PROPER MOVING EQUIPMENT IS HIGHLY RECOMMENDED.
The locaon of the gun safe is very important and the utmost care should be taken
during this consideraon.
1. To maximize the fire protecon of your safe, we recommend you place the safe
in lower levels in your home where fire temperatures are lower and away from
highly combusble materials.
2. To maximize burglary protecon and stability, securing the safe to the floor is
recommended.
3.
Using a dolly capable of supporng the size and weight of your safe, move the safe
to your desired locaon. Please take all necessary precauons to protect and
prevent any damage to your flooring.
HELPFUL: TO DETERMINE WHETHER YOUR SAFE WILL MAKE IT THROUGH
DOORWAYS, STAIRS OR CORNERS TAKE THE EMPTY SAFE BOX AND SEE IF IT WILL
FIT ALL THE WAY THROUGH TO ITS FINAL LOCATION.
1. The safe should be installed adjacent to a side wall with minimal space on
either side of the safe. Wherever possible, the safe should be flat against the
wall and floor. Remove the baseboard and/or wall trim if necessary.
2. Always ensure the safe is in an isolated and dry area. Never place the safe in
direct contact with a wet floor. When installing your safe on a concrete floor,
use of a moisture/protecve barrier is highly recommended. Failure to do so,
or exposing the safe to chemicals or other adverse environments, may void the
warranty.
3. If your safe seems unlevel, you may need to shim the boom of the safe to
prevent the door from swinging open too quickly, or closing on itself.
SA Consumer Products recommends that you store your Safe in a closet, office,
basement, bedroom or any other locaon that is convenient for you but out of
direct line of sight from prying eyes. The locaon of the Gun Safe is very important
12. PROPER PLACEMENT AND MOVING OF SAFE
www.sportsafieldsafes.com 12

WARNING: YOUR SAFE IS DESIGNED TO SUPPORT ITSELF WHEN THE DOOR IS
OPENED. HOWEVER, CAUTION SHOULD BE USED TO AVOID TIPPING. WHILE SECURING
YOUR SAFE BE SURE TO HAVE A SECOND PERSON HOLD AND STABILIZE THE SAFE
TO KEEP IT FROM TIPPING, CAUSING INJURY, AND/OR DAMAGE TO THE SAFE AND
SURROUNDING STRUCTURES. FAILURE TO DO SO WILL COMPROMISE THE SAFETY,
SECURITY AND WARRANTY OF THE SAFE.
TOOLS NEEDED TO BOLT SAFE TO A CONCRETE SURFACE
DRILL / HAMMER DRILL
DRILL BIT – 1/2” ( for installing into concrete with provided hardware)
WRENCH / 11/16” (17MM) SOCKET
HAMMER
1. Use the hardware provided or consult your hardware retailer for fastening
hardware for your parcular mounng surface.
2. Open your safe door and locate and remove the four black caps on the safe
floor. This will provide access to the factory drilled bolt down holes.
3. To secure your safe to the floor it will first be necessary to drill pilot holes in
the floor surface.
4. Drill the appropriate diameter and depth of pilot holes based on the type of
hardware being used and the type of floor surface. For the hardware provided
(concrete floor installaon) we recommend using a hammer drill and 1/2”
concrete drill bit to drill holes the four corresponding holes in the concrete
floor.
5. Insert and drive the plasc anchoring plugs into the pilot holes. You may need
to use a hammer to fully insert the plugs into the pilot holes.
6. Secure the safe, by threading all 4 anchor bolts through the factory drilled bolt
down holes in the boom of the safe and ratcheng down ght.
Make sure the metal washer sits on top of the rubber washer.
Tighten the bolt to compress the rubber washer between the safe
and metal washer. Failure to do so, will allow water to enter the safe
in the event of a flood.
7. Replace the four black caps onto the floor of the safe.
13. SECURING YOUR SAFE
www.sportsafieldsafes.com 13

1. Store documents or heat sensive items in the boom of the safe for greatest
protecon against fire damage.
2. Store ammunion separately from valuables.
3. Do not put anything in your safe that will put pressure against the door when it
is closed.
4. Select safe models have reinforced shelving but as a good safety precauon
store heavier items either on the floor of the safe or away from the middle of
the shelves.
We recommend placing a moisture/protecve barrier between your safe and
concrete floor to prevent any moisture, mildew and rust damage the safe.
Installing your safe in a place with climate control (heat in the winter and cooling in
the summer) is highly recommended. In areas of high humidity or frequent
temperature fluctuaons (garages) it is recommend to take appropriate
precauons to ward against moisture damage. We strongly encourage the use an
internal dehumidifier and/or desiccants to protect your contents from rust or
mildew. Internal dehumidifiers should not be in direct contact with the side or back
walls.
The hinges and internal locking mechanism are permanently lubricated, thus
needing no maintenance. Opening the door panel of your safe may void your
warranty. Always consult our customer service experts prior to doing so.
14. LOADING YOUR SAFE
15. KEEPING YOUR SAFE DRY
16. MAINTAINING HINGES AND INTERNAL MECHANISMS
When loading guns into your safe, make sure they rest securely against the
cutouts provided in the gun racks to prevent accidental pping when the
door is closed.
5.
www.sportsafieldsafes.com 14