Beaumont SMART KEYBOX User manual

B
SMART KEYBOX
USER GUIDE
Vlijtstraat 40
7005 BN Doetinchem
The Netherlands
www.smartkeybox.nl

2
Beaumont Smart Keybox
What’s included
0
1
2
3
45
6
7
8
9
1 x KeyBox
2 x Mounting Screws
2 x Screws Anchors
2 x Screw Cap
1 x Reset Tool

3
Beaumont Smart Keybox
Specications
Material Body Zinc Alloy, SUS304
Battery 4 x AAA Alkaline Battery (not included)
Unlock Mechanism Bluetooth, PIN Code, App
Jump Start USB-C
Front Inside Back
mm021
120mm 120mm46mm
0
1
2
3
45
6
7
8
9
mm021
Depth
70mm

4
Beaumont Smart Keybox
Step 1 > Install Battery
> 1. Remove the (4) Philips screws on the battery cover.
> 2. Put 4 AAA batteries into the battery dock. Don’t close the cover yet!
A A A
A A A
A A A
A A A

5
Beaumont Smart Keybox
Step 2 > Download Mobile App (This is only necessary if you want
to manage the Smart Keybox via your mobile phone.)
> 1. Scan QR Code below and download the App, or download the Smartlife app from the
Play Store or App Store. Turn on your mobile Bluetooth.
Step 3 > Add Device
> 1. Go to App Home page, click Add Device or
click “+” on the upper right.
Play Store App Store

6
Beaumont Smart Keybox
> 2. Press the “Reset” button and hold it for 3 beeps to start pairing. Use the reset tool.
Use The Reset Tool
> 3. You will see the detected device and click “Go to add”.

7
Beaumont Smart Keybox
> 4. Connecting, you need to wait for a few seconds to let it nish.
> 5. Device added, you can close the cover now.

8
Beaumont Smart Keybox
> 1. OPENING THE SMART KEYBOX
Enter the code (Manager Code set at the factory = 1-2-3-4-5-6) and
push the “enter/led ”button. If the code is correct, a music sounds,
and the enter/led button wil light up green.
You can now open the Smart Keybox by pulling the cover forward at
the top. After closing the cover the Smart Keybox will lock again.
> 2. CHANGE MANAGER CODE (6 digits)
Press and hold “enter/led” button until three signals have sound. The LED blinks blue.Then enter your
Manager Code. (Manager Code set at the factory = 1-2-3-4-5-6) and push the enter/led button.
1 2 3 4 5 6
Enter a new Manager Code and push the “enter/led” button.
For example:
9 9 7 7 5 5
.......
The LED blinks fast for a short time. Wait for the green LED, the code has now been changed.
> 3. ADDING A NEW USER CODE (6 digits)
Press and hold “enter/led” button until three signals have sound.
General instructions
1 2 3 4 5 6

9
Beaumont Smart Keybox
9 9 7 7 5 5
Enter your personal manager code.
9 8 7 6 5 4
9 8 7 6 5 4
Enter user code and push the “enter/led” button. Enter user code again and push the “enter/led”
button. Now the user code is added.
> 4. CHANGING A USER CODE
Push “enter/led” button, enter “1”, push “enter/led” button.
9 8 7 6 5 4
Enter user code and push the “enter/led” button.
1 1 3 4 5 5
Enter new user code and push the “enter/led” button.
1 1 3 4 5 5
Enter new user code again and push the “enter/led” button.
The user code is changed.
1

10
Beaumont Smart Keybox
> 5. DELETING A USER CODE
Push “enter/led” button, enter “2”, push enter/led button.
9 9 7 7 5 5
Enter manager code and user code to be deleted, push “enter/led” button.
> 6. DELETING ALL USER CODES
0 0 0 0 0 9 9 7 7 5 5
Push “enter/led” button, enter “00000” and “enter/led” button, then enter managercode and “enter/led”
button and wait for 3 seconds.
> 7. SYSTEM LOCKDOWN
The Smart Keybox will be blocked for 5 minutes after 5 wrong code entries.
> 8. RESET TO FACTORY MODE
It is possible to reset the Smart Keybox to factory mode. Press and hold the “Reset” button (page 6)
for 5 beeps and when you hear a short music, the device has been reset to factory mode.
2
1 1 3 4 5 5