Mattel BOOMco DYNAMAG User manual

A. Fully load clip with darts.
B.
A. Pull slide all the way back and release.
B.
C. Remove empty clip and reload!
TO LOAD
2TO FIRE
3
CONTENTS
1WARNING: Do not aim at eyes or face. Only use projectiles supplied
with this toy. Do not re at point blank range.
TO AVOID INJURY: Do not modify rounds, darts, or dart blaster.
Always wear appropriate eye-wear, sold separately.
CJF20_1100323876_DOM
Please keep these instructions for future reference as they contain important information.
GAUNTLET
INSTRUCTIONS
©2014 Mattel. All Rights Reserved. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer
Services 1-800-524-8697. Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628
500303. Mattel Australia Pty., Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312.
Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour City, Tsimshatsui, HK,
China.
Tel.: [phone].
Diimport & Diedarkan Oleh: Mattel Southeast Asia Pte. Ltd. , No 19-1, Tower 3
Avenue 7, Bangsar South City, No 8, Jalan Kerinchi, 59200 Kuala Lumpur, Malaysia. Tel: [phone], Fax:
03-78803867.
14
DATE: 08.27.2014
23
ATTACHING TARGETS
Do not stick target to walls
or furniture as it may cause
damage to the surface.
Peel backing off target before sticking
it to surface.
REMOVING DARTS
4CLEANING DARTS
6
5
REPLACING TARGETS
& SHIELDS
7
Y8620/BBY17
Replace time-worn targets and shields with
Y8620/BBY17 SMART STICK™ REFILLS.
Each sold separately, subject to availability.
✖
Dust, dirt, and other debris can cause
darts to lose their adhesiveness.
NOTE: Dry darts before using again.
REMOVE DARTS
TECHNOLOGY !
IMMEDIATELY
TO MAINTAIN SMART STICK™
Keep one hand pressed on target, hold
dart by the tip and gently peel dart o.
To clean darts, rinse darts’tips with
tap water or use tape to remove
excess debris.
x 6
DYNAMAG™
Press trigger to re!
Pull slide back and press trigger again to re the next dart!
Works with all BOOMco.™ clips.
Insert the fully loaded clip from
the top of the blaster with the
arrowheads pointing down.
INSTRUCTION SHEET
SPECIFICATIONS
Toy:
Toy No.:
Part No.:
Trim Size:
Folded Size:
Type of Fold:
# colors:
Colors:
Paper Stock:
Paper Weight:
EDM No.:
DATE:
CJF20
MAG BLASTER
1100323876
A4
70 gsm
REV.DATE:
One
black
FSC recycled paper
Align marking ( ) to
blaster as shown.
Click!
a
b

A. Fully load clip with darts.
B.
A. Pull slide all the way back and release.
B.
C. Remove empty clip and reload!
TO LOAD
2TO FIRE
3
CONTENTS
1WARNING: Do not aim at eyes or face. Only use projectiles supplied
with this toy. Do not re at point blank range.
TO AVOID INJURY: Do not modify rounds, darts, or dart blaster.
Always wear appropriate eye-wear, sold separately.
CJF20_1100323876_DOM
Please keep these instructions for future reference as they contain important information.
GAUNTLET
INSTRUCTIONS
©2014 Mattel. All Rights Reserved. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer
Services 1-800-524-8697. Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628
500303. Mattel Australia Pty., Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312.
Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour City, Tsimshatsui, HK,
China.
Tel.: [phone].
Diimport & Diedarkan Oleh: Mattel Southeast Asia Pte. Ltd. , No 19-1, Tower 3
Avenue 7, Bangsar South City, No 8, Jalan Kerinchi, 59200 Kuala Lumpur, Malaysia. Tel: [phone], Fax:
03-78803867.
14
DATE: 08.27.2014
23
ATTACHING TARGETS
Do not stick target to walls
or furniture as it may cause
damage to the surface.
Peel backing off target before sticking
it to surface.
REMOVING DARTS
4CLEANING DARTS
6
5
REPLACING TARGETS
& SHIELDS
7
Y8620/BBY17
Replace time-worn targets and shields with
Y8620/BBY17 SMART STICK™ REFILLS.
Each sold separately, subject to availability.
✖
Dust, dirt, and other debris can cause
darts to lose their adhesiveness.
NOTE: Dry darts before using again.
REMOVE DARTS
TECHNOLOGY !
IMMEDIATELY
TO MAINTAIN SMART STICK™
Keep one hand pressed on target, hold
dart by the tip and gently peel dart o.
To clean darts, rinse darts’tips with
tap water or use tape to remove
excess debris.
x 6
DYNAMAG™
Press trigger to re!
Pull slide back and press trigger again to re the next dart!
Works with all BOOMco.™ clips.
Insert the fully loaded clip from
the top of the blaster with the
arrowheads pointing down.
INSTRUCTION SHEET
SPECIFICATIONS
Toy:
Toy No.:
Part No.:
Trim Size:
Folded Size:
Type of Fold:
# colors:
Colors:
Paper Stock:
Paper Weight:
EDM No.:
DATE:
CJF20
MAG BLASTER
1100323876
A4
70 gsm
REV.DATE:
One
black
FSC recycled paper
Align marking ( ) to
blaster as shown.
Click!
a
b