MaxiCosi Gia XP User manual

Gia XP
3-Wheel Stroller
65 lb (29 kg)
4358-8148 3.2.21
KEEP INSTRUCTIONS FOR FUTURE USE.
Read all instructions before using this stroller.

Safety Information
FOR THE SAFETY OF YOUR CHILD, PLEASE READ THE FOLLOWING WARNINGS AND
INSTRUCTIONS AND KEEP FOR FUTURE REFERENCE.
• Adult assembly required.
• NEVER LEAVE CHILD UNATTENDED. ALWAYS keep child in view when in stroller.
• AVOID SERIOUS INJURY from falling or sliding out. ALWAYS use the harness system.
Check frequently to make sure it is secure.
• ALWAYS keep fingers away from moving parts, when folding, unfolding or adjusting stroller to
prevent finger entrapment.
• ALWAYS make sure stroller is fully open and locked before using.
• ALWAYS use the brakes when stroller is stopped.
• ALWAYS remove protective material and poly bags and dispose before assembly.
• NEVER put hot liquids in the cup holder.
• NEVER use stroller on stairs or escalators.
• NEVER rollerblade with stroller.
• NEVER allow children to play with or hang onto the stroller.
• NEVER allow children to climb into the stroller unassisted. Stroller may tip over and injure child.
WARNING:

• NEVER place or hang parcels, bags, or accessories on the handle or canopy. The stroller may
tip over or the canopy may collapse.
• This product will become unstable if a parcel bag or rack is used when there is no provision for
one.
• This product may become unstable if a parcel bag, other than the one recommended by the
manufacturer is used.
• This product will become unstable if the manufacturer’s recommended load is exceeded.
• Care must be taken when folding and unfolding the stroller to prevent finger entrapment.
• DO NOT carry additional children, goods, or accessories in or on this product except as
recommended in the manufacturer’s instructions.
• NEVER place more than 2 lb (.9 kg) in cup holder.
• NEVER place more than 10 lb (4.5 kg) in the storage basket. If weight is exceeded, hazardous
unstable conditions may exist.
• NEVER place more than 1 lb (.5 kg) in the storage pocket.
• STROLLER is only for use with children up to 65 lb (29 kg), AND WHEN SEATED, the midpoint
of your child’s head is at or below the top of the stroller seat.
• ONLY use this stroller with ONE child at a time.
• STROLLER is for use with children who can sit up unassisted and is NOT recommended for
newborns.
• Failure to follow the steps and warnings on the labels and in the instruction manual can result
in serious injury or death to your child.

Contents
Parts of Stroller........................................ 1
Installing & Removing Wheels ................... 2
Unfolding Stroller Frame........................... 3
Adjusting Handle ..................................... 4
Using Parking Brake and
Locking Swivel Wheel............................... 5
Attaching Car Seat to Stroller Frame ......... 6
Removing Car Seat from Stroller Frame..... 7
Reclining Stroller Seat .............................. 8
Canopy Use & Storage Basket Access Panel .. 9
Storage Basket & Pocket Use.................... 10
Adjusting Stroller Seat Harness Straps....... 11
Securing Child in Stroller Seat................... 13
Folding Stroller ........................................ 14
Removing Stroller Seat Pad Insert ............. 15
Installing Stroller Seat Pad Insert............... 16
Cup Holder Use & Care............................. 17
Wash & Care of Stroller Parts.................... 18
Dorel Juvenile Group Information .............. 19
Replacement Parts................................... 19
Warranty ................................................. 19

Parts of Stroller
1
Lay out and identify all of the
parts.
If any parts are missing, do not
return this product to the
place of purchase.
Please contact Consumer Care
via:
• Phone: [phone]
• Text: 1-812-652-2525
• Chat: www.maxicosi.com
You will need to know the model
number and manufacture date.
It is located on a label on the
stroller frame.
Stroller
Frame
Car Seat
Adapters
Rear
Wheels
Front Swivel
Wheel
Cup
Holder
Removable
Canopy with
Peek-a-Boo
Window
Storage Basket
Access Panel
Harness
Straps
Harness
Covers
Buckle
Stroller Seat
Pad Insert

Installing & Removing Wheels
2
Attach the front
swivel wheel.
Attach the rear wheels.
Finished!
NOTE: Pull out on the wheels to
make sure they are secured.
Rear
Wheels
Front
Swivel
Wheel
Installing Wheels
click!
1 2
click!
3
Removing Front Swivel Wheel Removing Rear Wheels
Locate and press the release
button on the stroller frame.
Remove the front
swivel wheel.
Locate and press the release button on the
stroller frame. Remove the rear wheel.

Unfolding Stroller Frame
3
• Push in on the stroller frame to release the latch.
• Pull the stroller frame latch away from the stroller.
• Hold the stroller frame as shown and lift up.
• Continue to lift up until the stroller locks into place. Finished!
Stroller Frame Latch 1
23
ALWAYS keep fingers away from moving parts, when folding, unfolding, or adjusting stroller
to prevent finger entrapment.
WARNING:
click!

Adjusting Handle
Press the handle adjustment buttons and hold them in.
Then rotate the handle to the desired position.
Handle Height Adjustment Buttons
(1 on each side of handle)
4
1
This stroller’s handle is adjustable and has 4 positions.
Adjust to a position that is comfortable for you.
3 4
21
2

Using Parking Brake & Locking Swivel Wheel
To Lock Parking Brake
To Lock Swivel Wheel
To Release Parking Brake
To Unlock Swivel Wheel
Rear Wheels
Front Swivel Wheel
click!
click!
• The wheel must face forward as
shown.
• Firmly pull the lock tab up.
• A locked swivel wheel is best
for traveling over rocky or
uneven surfaces.
• Firmly push the lock tab
down.
• An unlocked swivel wheel
is best for everyday
strolling.
5

Attaching Car Seat to Stroller Frame
Match the colored dots on the adapters with the colored dots on the
attachments located on the stroller frame. Install the car seat adapters
to the attachments on the stroller frame.
Attach the car seat to the car seat adapters.
ONLY install the car seat rear-facing.
Pull up on the car seat either at
the carry handle or handle hubs
to check if it is securely attached.
Car Seat Adapters click!
click!
6
Illustrations show a generic car seat icon.
1
2 3

Removing Car Seat from Stroller Frame
Car seat stroller
release mechanisms
& locations vary by
car seat model.
Review your car seat’s
instruction manual
to locate the stroller
release mechanism
on your car seat.
While engaging
your car seat’s
stroller release
mechanism, lift
the car seat off
the stroller frame.
Press the release button on the car seat adapters. Remove the car seat adapters.
Removing Car Seat Adapters
You can fold and store the stroller with the adapters still attached.
You must remove the adapters before placing your child in the stroller seat.
7
Illustrations show a generic car seat icon.
2
2
1
1
Mico Models’
Stroller Release Buttons
Coral Models’
Stroller Release Lever

Reclining Stroller Seat
8
This stroller seat has multiple recline positions.
Adjust to a position that is comfortable for your child.
To Recline To Make Upright
Squeeze the tab together.
Push the stroller seat forward while
sliding the tab up the straps.
At the back of the stroller seat,
squeeze the tab together and pull
it towards you.
Illustrations show the stroller seat reclined and upright. However there are multiple recline positions.

9
Canopy Use & Storage Basket Access Panel
To access the storage basket, pull the tab
up on the front of the stroller seat.
Lift the fabric to access
the Peek-a-Boo window.
Adjusting Canopy Storage Basket Access Panel
Pull the canopy forward.
You can unzip the canopy
to extend it farther.
Removing & Attaching Canopy
Locate the canopy
attachments on
stroller frame.
Slide the canopy ends onto the
attachments and push down until
they are secured.
Attach the fastening strips of the canopy
to the sides and back of the stroller
frame as shown.
123

Storage Basket & Pocket Use
max
10 lb
4.5 kg
max
1 lb
.5 kg
10
• NEVER place more than 10 lb (4.5 kg) in the storage basket. If weight is exceeded,
hazardous unstable conditions may exist.
• NEVER place more than 1 lb (.5 kg) in the storage pocket.
WARNING:

11
Adjusting Stroller Seat Harness Straps
Unbuckle. From the back of the seat,
push the harness retainers
through the harness slots.
Harness System
Pull the harness strap
out of the harness slot.
From the back of the seat,
pull the harness retainers
through the harness slots.
Push the harness retainers
into the harness slot closest
to your child’s shoulders.
1
4
32
5
As your child grows, you will need to adjust the harness strap height.
WARNING:
• Belts must be threaded
exactly as shown.
• Failure to follow these
instructions could result
in serious injury or death
of your child.

To Shorten Harness Strap
To Lengthen Harness Strap
Hold the long end of the strap
and then push it up.
Hold the short end of the strap
and then push it up.
Hold the long end of the strap
and then pull it down.
Hold the short end of the strap
and then pull it out to tighten.
12
1
1
2
2

13
Securing Child in Stroller Seat
Unbuckle. Place your child
in the stroller
seat.
BOTTOM
TOP
Buckle. Finished!
Fit the top buckle
tongue over the
bottom buckle
tongue. Hold
them together.
1 2 3 4
• NEVER LEAVE CHILD UNATTENDED. ALWAYS keep child in view when in stroller.
• AVOID SERIOUS INJURY from falling or sliding out. ALWAYS use the harness system.
Check frequently to make sure it is secure.
• ONLY use this stroller with ONE child at a time.
• STROLLER is only for use with children up to 65 lb (29 kg), and WHEN SEATED, the
midpoint of your child’s head is at or below the top of the stroller seat.
• ONLY use this stroller with ONE child at a time.
• STROLLER is for use with children who can sit up unassisted and is NOT recommended
for newborns.
• Failure to follow these instructions could result in serious injury or death of your child.
WARNING:
click!

Folding Stroller
Pull the release handle up until
the stroller starts to fold.
• Lift the rear wheels off the
ground and tilt the stroller
forward until the handle
touches the ground.
• Push the stroller frame latch in.
• Push in on the frame latch to
lock the frame. Make sure it is
secure.
Finished!
Release Handle
14
2
1
ALWAYS keep fingers away from moving parts, when folding, unfolding, or adjusting stroller
to prevent finger entrapment.
WARNING:
click!

15
Unbuckle.
Pull the seat pad out of
the stroller seat.
Removing Stroller Seat Pad Insert
From the back of the
seat, push the harness
retainers through the
harness slots.
Pull the harness strap
out of the harness slot.
13 2
4

Thread the harness
straps through the slots
in the seat pad.
16
1 2 3
Put the seat pad in the
stroller seat.
Pull the buckle through
the slot in the seat pad.
From the back of the seat,
pull the harness retainers
through the harness slots.
Push the harness
retainers into the harness slot
closest to your child’s
shoulders.
4 5
Installing Stroller Seat Pad Insert
WARNING:
• Belts must be threaded
exactly as shown.
• Failure to follow these
instructions could result
in serious injury or death
of your child.