MAXIMUM Security CURTAIN-Versatile User manual

Page 1
MAXIMUM Security (1984) Ltd.
www.maximum.co.il
Operating Guide
CURTAIN-Versatile
Ceiling or wall mount Outdoor/Indoor intrusion detector with curtain field-of-view
PIR sensor + Microwave sensor + Anti-masking
FEATURES
Creates a super narrow protective screen of 40.
Combines PIR & Microwave sensors.
Masking protected (Anti-masking) by active infrared beams.
Ceiling or wall mounting (Vertical or Horizontal).
Remote Controlled- Detector settings can also be controlled
by Remote Control (option).
Adjustable PIR detection sensitivity.
Adjustable Microwave detection sensitivity.
Extremely reliable & highly immune to false alarms.
Auto temperature compensation.
Automatic adaptation to background noise.
A/D signal analyzer.
Powerful microprocessor controlled.
SPC - Smart Processing Controller.
High level of RFI/EMI immunity.
CONGRATULATIONS
We thank you for choosing a product of MAXIMUM Security (1984) Ltd.
Based on over 30 years experience in R&D and in production of advanced security systems, we are
proud to introduce to you the best Outdoor / Indoor motion detector ever presented, for industrial,
commercial and residential security.
To ensure proper operation and maximum use of all its benefits, please read all parts of this installation
and operating manual, and follow the step-by-step instructions.

Page 2
MAXIMUM Security (1984) Ltd.
www.maximum.co.il
INTRODUCTION
CURTAIN-Versatile creates a super narrow protective screen of 40(like a curtain) to secure openings
and open fields against intruders.
This type of protection allows free movement of people within the protected site- without setting off an
alarm.
CURTAIN-Versatile is waterproof and can be installed outdoors or indoors.
In addition to an unprecedented amazing and reliable detection capability, CURTAIN-Versatile is
equipped with excellent protection against any attempt to disable its operation by blocking (masking)
its near field-of-view, whether the alarm system is Armed or Disarmed (Anti-masking protection).
The protection against masking the near field-of-view of the detector is achieved by a continuous
active infrared beams scan.
CURTAIN-Versatile will detect almost any type of material that blocks (masks) its near field-of-view.
CURTAIN-Versatile combines two detection technologies- Two Microwave and Passive Infrared
(PIR), and verifies any intrusion by both methods.
An advanced and unique algorithm enables it to work in the most difficult environmental conditions
and where high security is required, while maintaining unprecedented immunity to false alarms.
CURTAIN-Versatile settings can also be controlled by Remote Control (option).
DETECTOR’S FIELD-OF-VIEW DIAGRAMS
CURTAIN-Versatile operates its relays and LED indicators according to the type of detection as
follows:
TYPE OF DETECTION
LED INDICATORS
RELAY STATUS + Remarks
Alarm- True motion detection
Red + Yellow +Green
Blinking simultaneously
ALARM relay will activate for 2 seconds
(Unless the time was changed by the
optional Remote Control RM-1)
P.I.R. detection
Red
No relay will operate
Microwave detection
Yellow
No relay will operate
Anti-masking detection
Green
Blinking
If masking persists for more than 90
seconds, the green LED will glow
continuously, and the Anti-masking relay
will operate for at least 2 seconds and for
as long as the masking exists.
4 m
28 cm
Ceiling or wall mounting

Page 3
MAXIMUM Security (1984) Ltd.
www.maximum.co.il
ADJUSTMENS
PIR
sensitivity
adjustment
Microwave
Sensitivity adjustment
High
Low
High
Low
TERMINAL BLOCK WIRING
12V DC
ANTI-MASKING
ALARM
RELAY
TAMPER
SWITCH
OFF
ON
OFF
ON
1
LEDs
OFF
ON
2
Remote Control
Mode
OFF
ON
3
Antimask sensitivity
Dual Detection
DIP SWICH

Page 4
MAXIMUM Security (1984) Ltd.
www.maximum.co.il
ANTI-MASKING LEARNING PROCEDURE-
PREPARING THE MASKING CHANNEL FOR OPERATION (Obligatory for proper
Anti-masking operation!!!)
To enable proper operation of the masking detection (Anti-masking), it is necessary to allow the
detector to automatically study and analyze the environmental conditions of its protected area.
This is an obligatory action that should be performed by the installer, ensuring proper operation of the
Anti-masking channel!!!
Study Procedure to be performed in two cases:
1. Upon connecting the power supply to the detector (after about 1 minute, the time it takes the
detector to stabilize when first fed by power supply).
2. Upon switching DIP switch No.3 from OFF to ON position.
Study Procedure:
- Immediately close the detector’s case (within 15 seconds maximum).
- Keep at least 1 meter away from its front part, until the Study Procedure is complete, about 1
minute.
LED indication during the Study Procedure:
1. The Red+Yellow LED indicators blink rapidly for about 30 seconds.
2. The Green LED lights for about additional 15 seconds, till the Study Procedure ends.
Initiating Study Procedure:
The Study Procedure can be performed by the optional Remote Control model RM-1.
Please initiate the Study Procedure if you assume the Anti-masking feature doesn't operate as
expected.
This is the programming route in the Remote Control: DetectorsCURTAIN-VersatileExist
DeviceEnter Device Code…Program DetectorMask Learn (Option No. 9).
PERFORM A TEST
* To be carried out when the case is closed and the LED indicators are enabled.
DIP switch No.1 should be switched to ON position.
In case you use the optional Remote Control RM-1, you have to:
1. Switch DIP switch No. 2 to ON.
2. In the Remote Control menu, go to set LEDs enable option (option No. 4) and then enable the
LED indicators.
Test procedure for human movement detection (Alarm):
oWalk in the protected area.
oCompulsory reaction of the detector:
Upon each detection, the “Alarm Relay” will operate for 2 seconds.
The Red+Green+Yellow LED indicators will blink simultaneously during those 2 seconds.
Test procedure for masking detection (Anti-masking):
oAt a distance of about 5 cm from the front of the detector, place a white piece of paper (or any other
object).
oCompulsory reaction of the detector:
The Green LED will immediately blink continuously as long as the masking object exists.
If the masking object exists for more than 90 seconds, the Green LED will glow continuously
and the Anti-masking relay will operate for at least 2 seconds and for as long as
masking exists.

Page 5
MAXIMUM Security (1984) Ltd.
www.maximum.co.il
SPECIFICATIONS
* Power supply……………………………………...…………...12V DC
* Current drain…...… Standby: 20mA (Max.); Operation: 40 mA (Max.)
* Alarm relay contacts endurance………………...…… 15V DC / 20 mA
* Anti-masking relay contacts endurance……………… 15V DC / 20 mA
* TAMPER Switch endurance……………………….... 24V DC / 20 mA
* Warm-up time………………………………..………….…… 1 Minute
* Alarm period…………………………………………......…. 2 Seconds
* Anti-masking relay respond time…………….……. 90 Seconds (Max.)
* Anti-masking relay activation period…………….. All time of masking
(at least 2 seconds)
* Motion detection coverage ................................................... 10 meter, 40
* Operating Temperature…………………….………..... (-)20 ~ (+)70oC
* Microwave operating Frequency……………………….... 24.125 GHz

Page 6
MAXIMUM Security (1984) Ltd.
www.maximum.co.il
CERTIFICATE OF WARRANTY
MAXIMUM Electronics (1984) Security Ltd. thanks you for buying its products, which have proven their
reliability and effectiveness over many years.
To ensure proper operation and functioning of the product and benefit from its features to the utmost, read the
Installation & Operating instructions carefully and follow them step by step.
MAXIMUM Electronics Security (1984) Ltd. (hereinafter –the “Manufacturer”) hereby
warrantees/guarantees the products manufactured by it (hereinafter –“Product” or “Products”) against defects in
production or in materials discovered during their reasonable use and servicing, in accordance with the
Manufacturer’s instructions, recommendations and limitations and subject to the provisions of this Certificate of
Warranty.
This Warranty is for a limited period of 12 months from the last day of the week and the year whose number is
printed on the electronic card (PCB) and/or electronically encoded in one of the Product’s components.
This Warranty is limited to the repair of a defective Product, or its replacement at the Manufacturer’s option,
during the Warranty period, subject to reasonable use and servicing in accordance with the Manufacturer’s
instructions, recommendations and limitations.
To realize the Warranty rights, the Product must be sent to the Manufacturer securely packaged and
accompanied by a document describing the problem, with insurance and freight prepaid by the sender.
The Manufacturer’s products boast a high standard of reliability, proven in tens of thousands of products over
many years. The percentage of problems encountered in them is virtually nil, therefore a Product must be
carefully checked (according to the operating instructions) before sending it to the Manufacturer for
examination and/or servicing in the Warranty framework.
In the event that the installer and/or user and/or customer and/or operator of a Product (hereinafter –the
“Customer”) returned the Product to the Manufacturer on the grounds that it is defective and received in
exchange from the Manufacturer a functional product, and upon examination the Manufacturer found that the
returned Product was not defective –the Customer will be charged the Product’s full value as consideration for
the resources invested by the Manufacturer in its examination.
The Manufacturer shall in no case be liable for damage or loss (including monetary loss), whether direct,
indirect, accidental, circumstantial or otherwise, entailed in the dismantling or reinstallation of the Product.
In case the Manufacturer decides to replace a returned Product that was found to be defective, the Customer
hereby gives its consent to receiving –at no added cost –also a higher version of the Product.
This Warranty is not valid in the following cases: incorrect installation, installation and/or operation not in
accordance with the Manufacturer’s instructions, alteration, misuse, accident, sabotage, repair or servicing by
someone other than the Manufacturer.
The Customer must take all necessary precautions to prevent and eliminate any discharge of static electricity or
other interference that could affect the Product’s functioning.
This Warranty is exclusive and explicit and replaces any other warranty, commitment or guarantee –whether
written, oral or implied.
The Manufacturer will in no case be liable toward anyone for a breach of this Certificate of Warranty or of any
of its foregoing provisions.
This Certificate of Warranty may not be altered, exchanged or expanded, and the Manufacturer does not
authorize anyone to do so on its behalf –including any distributor, dealer, agent, representative or employee of
the Manufacturer operating by its authority or on assignment from it.
This Warranty applies to the Product only!
Any other product, accessory or adjunct used together with the Product (including batteries) will be covered
solely by its exclusive warranty, if such exists.

Page 7
MAXIMUM Security (1984) Ltd.
www.maximum.co.il
The Manufacturer shall in no case be liable for damage or loss, whether direct, indirect, accidental,
circumstantial or otherwise, caused by the proper and/or improper functioning of the Product due to use of other
products, accessories or adjuncts (including batteries) together with the Product.
The Manufacturer does not claim that the Product is immune to malicious neutralization, bypass, sabotage or
deception, or that it will prevent in every case death or physical and/or mental injury due to burglary, robbery,
fire or the like, or that the Product will provide in all cases adequate and/or suitable warning or protection.
The Customer understands that correct installation and maintenance, in accordance with the Manufacturer’s
instructions, recommendations and limitations, merely reduces the risk of failure to give warning in cases such
as burglary, robbery and fire, but in no way ensures or guarantees that such cases will not occur or will not
result in death or physical and/or mental injury and/or damage to property.
The Manufacturer shall in no case be liable for death or physical and/or mental injury and/or damage to
property and/or loss of any kind, whether direct, indirect, accidental, circumstantial or otherwise, on the
grounds that the Product did not operate/function properly and/or as expected and/or according to the
description in its specification or in any other documentation.
The Manufacturer shall in no case be liable for damage or loss (including death or physical and/or mental injury
and/or damage to property), whether direct, indirect, accidental, circumstantial or otherwise, caused through use
of and/or reliance upon the Product.
In the event that the Manufacturer is held liable, directly, indirectly, circumstantially or otherwise, for any loss
or damage according to the terms of this limited Warranty or otherwise (irrespective of its cause or origin), the
maximum amount of the Manufacturer’s warranty and/or guarantee shall not exceed in any case the Product’s
price, and it shall be payable as full and final consideration, and not as a penalty, and shall constitute the entire
and sole compensation by the Manufacturer.
It is hereby clarified that the Warranty under this Certificate of Warranty does not cover anything not explicitly
and specifically referred to herein.
It is hereby agreed that the Customer waives in advance any claim or contention against the Manufacturer.
Should the Customer and/or a person on his/her behalf nevertheless file suit against the Manufacturer, the
Customer and/or that person in such case shall bear all their costs and the Manufacturer’s costs arising
therefrom, including lawyer’s fees, and shall indemnify the Manufacturer for the full amount adjudicated
against it in a decision, if any, rendered by any court or arbitrator.
Warning!
The Customer must make sure that the Product meets all his/her requirements, and he/she must comply fully
with the installation and operating instructions and inter alia check the Product and the entire system at least
once a week including under field conditions.
For various reasons (but not only those set out below), changes in environmental conditions and/or electric or
electronic interference and/or malicious damage to the Product could cause the Product to function in an
unforeseen manner.
The Customer must take all precautions to ensure his/her own safety and security and that of his/her property.
The Customer confirms that he/she read all the conditions of this Certificate of Warranty and
he/she agrees thereto.
Installation and/or operation of the Product shall be deemed as the Customer’s agreement to all
the conditions of this Certificate of Warranty.