MAXTRA MAX User manual
MAXTRA
MAX
ELECTRIC SCOOTER FOR ADULTS
USER MANUAL
Thank you for choosing
MAXTRA!
Please take a few minutes to read this user manual
before using it.This manual will help you better under-
stand your scooter and, with proper care, it will provide
years of trouble-free use.
If you have any questions, please do not hesitate to
contact us. If you can attach some pictures or videos, it
will help us better understand your difficulties.Our
customer service team will give you a satisfactory reply
within 24 hours.
.
Contents
Must Read 01
............................................................................
Safety Warning 02
....................................................................
Know Scooter 04
.......................................................................
Console 09
.................................................................................
Charge 08
.................................................................................
Anti-theft 10
...............................................................................
Assemble 07
...............................................................................
Specifications 06
........................................................................
Parts Replacement 05
................................................................
Unpack 03
..................................................................................
Fold 11
.....................................................................................
Started Riding 12
........................................................................
Riding Tips 13...........................................................................
Dangerous Actions 14
..............................................................
Bluetooth/APP 15
.....................................................................
Maintenance 16
......................................................................
01
Always wear a helmet when riding your electric scooter.
Make sure youre scooter has a full battery before taking it out to ride.
Always be aware of local road laws，and follow them.
Do not ride the scooter under the influence of drugs or alcohol.
Always respect pedestrians.
Do not ride under wet conditions. The scooter may slide from under your
feet causing injury. Wet conditions may damage the electronics and void
the warranty.
02
1. Avoid water - The scooter is not waterproof.The electronics may be
damaged dueto water and water damage is not covered by our warranty.Rid-
ing in wet conditionsis also very dangerous and may result in injury.
2. Abuse - We do not cover physical damage due to negligent care and
extremeriding.
3. Whenever you ride the MAXTRA scooter, you risk severe injury or
even death from loss of control, collisions, and falls. Use caution and ride at
your own risk.
4. Do not modify the product from the manufacturer's original design.
5. Keep hands and all body parts away from moving parts while operating
thescooter.
6. Before riding - be sure to check the scooter over and make sure the
scooter isoperating correctly before each use.
7. Before riding - be sure to check that the braking system is functioning
properly;also be sure to check that all safety labels are in place and you
understand the safetywarnings.
8. Before riding - be sure that any and all axle guards, chain guards, or
other coversor guards supplied by the manufacturer are in place and in
serviceable condition.9.Before riding - be sure to check that the tires are in
good condition, inIlatedproperly, and have sufficient tread remaining.
10. Never exceed the 265 lb（120 kg）maximum load rating.
11. The electric scooter should never be used by children under the age of
12. Maximum Speed - Your electric scooter goes the maximum speed of 19
mph.
WARNING - Risk of Fire -No User Serviceable Parts
You should find each of these items in your box:
1. Electric Scooter
2. 6 Connecting screws（Installation requires only 4 ）
3. 3mm Allen Wrench
4. Approved Power Adapter / Charging Unit
5. 2 Spare large screw
03
04
#3Rear Wheel
Tail Light
#9 Rear Fender
#1 Lithium Batter Pack
Led Panel
Throttle
Hook
Stem
Fold button
Deck Cover
Disc Brake Handle
#4 Grip
Electronic Brake
Headlight
Anti-Theft Lock
#5 Front Fork Cover
Front Fender
#6 Kickstand
Charge Port
#7 Reflector
Motor
#3 Front Wheel
05
Part# Part Name
Quantity
1
Lithium Battery
1
2Charger 1
3Wheel 1
4Grip 1
5
1
6Kickstand 1
7Reflector 1
8
Disc Brake 1
9
Rear Fender 1
10
Tool Bag 1
Image
Front Fork Cover
06
Weight
Riding Requirements
Main Parameters
Battery Parameters
Motor Parameters
Charger Parameters
Length × Width × Height （folded）
Length × Width × Height （unfolded）
Net. Weight
Max. load
Applicable age
Applicable Height
Max. speed（km/h）
Range
Max. Incline（%）
applicable Terrain
working temperature
storage temperature
Waterproof
Rated Voltage
Max. Output Voltage
Rated Capacity
Battery Smart Management System
Rated Power
Max. Power
Rated Power
Rated Input Voltage
Rated Output Voltage
Rated Current
Charging Time
45.3*17*46.5inch
48.4*17*13inch
38.5lb
45~265lbs
16~50
4~6.4feet
19mph
19miles
20%
Cement, asphalt, flat soil pavements, bumps or
steps less than 3cm high
14~104°F
-4~113°F
IP54
36 VDC
42 VDC
7.8 Ah
Over-current Protection，Double Protection from
Overcharging，Double Protection from
Over discharging，Over-current Protection，
Under-voltage Auto-sleep Protection ，
Temperature Resistance
350 W
700 W
71 W
100-240 VAC
42 VAC
1.7 A
5 Hours
Dimension
ItemsPerformance Index Parameters
07
Press the fold button and lift the stem
vertically
Connect the wire inside the handlebar and
the stem，then insert the handlebar into
the stem
Use screws and wrenches to secure
handlebar in place
1.Open the charging port cover.
2.lnsert the charging plug into the port.
3.The charger box will have a green light when fully charged and a red light when-
charging.
4. When you are done charging be sure cover the charging port to keep it clear
ofdust and debris.
5.Charging Time: About 5 hours
Charging Requirement: Make sure to charge your scooter in conditions that do
notexceed 104 degrees Fahrenheit or below 32 degrees Fahrenheit.
Before using the scooter, you must fully charge the battery.
08
Panel function
A. Start, Turn on/off Light, Choose Speed Level, Shut
1. Press the start button :
1.1 Press the start button for 2 seconds to start E-scooter.
1.2 One touch of the start button to turn on or turn off the light.
1.3 Two continuous touches to choose different speed levels. One slash: 10mph;
two slashes: 15mph; three slashes: 19mph.
1.4 Press the start button three times in a row to turn cruise control on/off
1.5 Press the start button for 2 seconds to shut the E-scooter.
B.Start Attentions
* When the scooter is motionless, press the right thumb throttle will NOT work.
* KICK to Start: when you need to ride the scooter, you should use your foot to slide
the scooter for a while, and then press the right thumb throttle to control the speed.
Km/h
Mph
S
Speed Level
Speed Mode
Start Button
Seep
power
Bluetooth
Light
Cruise
Brake Level
09
At the bottom of the stem is a built-in anti -the ft d evice in the form of asteel
cable that can be locked with a nume rical code.
1.Lockin g head
2.Anti- theft cable
3.Anti- theft cable storage sp ace4.Lock
5. Lockin g butt on
6.Dials
7.Code reset button
The default anti-theft device unlock code is: 0-0-0-0
1. Unlock the anti-theft device (default code 0000)
2. Slide the reset button to the right (SET mode)
3. Set a new code by turning the dials
4.Slide the reset button to the left
Toatfachthe scooterto afixedsupport:
1. Pull on the anti-theft cable
2. Press the unlock button
3. insert the cable head in the lock
4. Turn the dials to lock the anti-theft device
Toremove the scooterfroma fixed support:
1. Enter the safety code
2. Press the unlock button
3. Pull the cable out of the lock4. Stow the cable in the stem tube
After use, to store the cable, push up on the cable of the anti-theft device intothe stem
tube and secure
the cable head in the storage bracket to prevent it from hanging down andgetting
caught in the wheel.
3
1
2
4
5
6
7
Please note that the anti-theft lock can not prevent a thief carrying lock cutting
tools, please keep it properly
10
Press down the front tube to complete the
folding operation.
Unfold the kickstand, turn the front tube to the left
to complete the unfolding operation.
Hold the front tube with your left hand, press the
folding block with your right hand.
Hold the front tube with your left hand, press
the folding block.
The E-scooter could be folded to save save and convenient to carry or store.
Fold the kickstand
11
12
Km/h
Mph
S
wear an approved helmet and other protective gear to
minimize any possible injury
Turn the power on, and check the electricity indicator.
Stand on the base with one foot and propel yourself with
the other foot.
When the electric scooter begins to glide, put both feet
on the deck and press the accelerator. The speed shall
be kept above 2mph for starting the throttle.
Release the throttle and to reduce the speed slowly.
Squeeze the brake lever for a sudden brake.
Tilt your body to the steering direction as you turn, and turn
the handlebar slowly
Do not ride in the rain.
Do not press the throttle when walking with the scooter.
Please keep a medium or low speed (５mph) when you ride
through speed bumps,elevator door sills, bumpy roads or other
uneven surfaces Slightly bend your knee to better adjust
mentioned surfaces
Always steer clear of obstacles.
Look out for doors, elevators and other overhead
obstacles.
Do not accelerate when you go downhill.
Do not hang bags or other heavy stuff on the
handlebar.
Keep both feet on the deck all time.
13
14
Install the APP
For Android users, scan the QR code on the left,
and for IOS users, scan the QR code on the right to
download the APP.
Or search for "UNI SCOOTER "in the Android APP
STORE/Apple APP STORE to download
Vehicle FansMoments MeDiscover
Km/h
Mph
S
Turn on the scooter power, open the APP and click
search. After searching the scooter code, click the
code to link
The scooter beep when the connection is success-
ful.
The bluetooth tag on the scooter will flash
You can now start to use your Scooter, check the
status with App, and personalized Settings for the
scooter. Have fun!
15
Cleaning and Storage
Use a soft, wet cloth to wipe the mainframe clean. Dirt hard to remove can be scrubbed
with a toothbrush and toothpaste, then cleaned with a soft, wet cloth.
NOTE
Do not wash your scooter with alcohol, gasoline, acetone, or other corrosive/volatile
solvents. These substances may damage the appearance and internal structure of your
Scooter. Do not wash your scooter with a power washer or hose.
WARNING
Make sure the scooter is powered OFF, the charge cable is unplugged, and the rubber
cap on the charge port is tightly sealed before cleaning; otherwise you may damage the
electronic components.
Store your Scooter in a cool, dry place. Do not store it outdoors for extended periods of
time. Exposure to sunlight and temperature extremes (both hot and cold) will accelerate
the aging process of the plastic components and may
reduce battery life.
Tire
Inflate tires to 45 psi. Inflate both tires equally.
Tires supplied with the product are to be mounted on the wheel by a professional
repairer. Removing the wheels is complicated and incorrect assembly can lead to
instability and malfunctions
Maintenance
Do not store or charge the battery at temperatures outside the stated limits (see Specifi-
cations). Do not puncture the battery. Refer to your local laws and regulations regarding
battery recycling and/or disposal.
A well maintained battery can perform well even after many miles of riding. Charge the
battery after each ride and avoid draining the battery completely.
16
When used at room temperature (70°F [22°C]) the battery range and performance
is at its best; whereas using it at temperatures below 32°F (0°C) can decrease
range and performance. Typically, at -4°F (-20°C) range can be half that of the
same battery at 70°F
Typically, a fully charged battery should retain power for 120-180 days. A low-pow-
er battery should retain power for 30–60 days. Remember to charge the battery
after each use. Completely draining the battery may cause permanent damage to
the battery.
WARNING
Do not attempt to disassemble the battery. Do not touch battery contacts. Do not
dismantle or puncture the casing.
Keep the battery contacts away from metal objects to prevent short circuit. Risk of
fire and electric shock. No user serviceable parts. Do not charge or use your
battery if it is damaged or see trace of water.
WARNING
Do not ride when the ambient temperature is outside the machine operation
temperature (see Specifications) because low/high temperature will limit the
maximum power/torque. Doing so could cause personal injury or property damage
due to slips or falls.
Others
The external flexible cable of this transformer cannot be replaced; if the cord is
damaged, the transformer must be discarded and replaced by a new one.
Efforts have been made to simplify wording in the user manual for users. Where an
action appears too complicated for a user, he is advised to contact an authorized or
a specialized repairer or customer service.
17
Table of contents
Other MAXTRA Scooter manuals
