Maytronics Supreme M4 User manual

Supreme M4 Assembly Instructions
Page 1of 18
Table of Contents
1. Assembling the Motor Unit’s Parts ...................................................................................................2
2. Assembling the Diaphragms .............................................................................................................3
3. Assembling the Active Brush ............................................................................................................4
4. Assembling the Motor Unit ...............................................................................................................5
5. Assembling the Driving System and Side Cover................................................................................6
6. Assembling the driving system and Side Cover on the other side of the robot ................................. 9
7. Assembling the Floating Cable ....................................................................................................... 11
8. Positioning the Float ...................................................................................................................... 13
9. Positioning the Brush Covers.......................................................................................................... 14
10. Assembling the Outer Casing........................................................................................................ 15
11. Assembling the Impeller Cover .................................................................................................... 16
12. Assembling the Handle.................................................................................................................17
13. Assembling the Brushes ............................................................................................................... 18

Supreme M4 Assembly Instructions
Page 2of 18
1. Assembling the Motor Unit’s Parts
Step 1.1
Secure the
impeller with a
4X25 screw.
Step 1.2
Secure the
impeller protector
cylinder with 4
KA50X12 screws.

Supreme M4 Assembly Instructions
Page 3of 18
2. Assembling the Diaphragms
Step 2.1
Insert two
diaphragms.

Supreme M4 Assembly Instructions
Page 4of 18
3. Assembling the Active Brush
Step 3.1
Place the Active
Brush in its place.
Step 3.2
Secure the Active
Brush in place with
4X KA50X20
screws.

Supreme M4 Assembly Instructions
Page 5of 18
4. Assembling the Motor Unit
3.
2
Step 4.1
There is only one
way to place the
motor unit in the
frame.
Step 4.2
Secure the
motor unit to
the frame with
4X KA50X20
screws.

Supreme M4 Assembly Instructions
Page 6of 18
5. Assembling the Driving System and Side Cover
Step 5.1
Place the guide
wheels on the
side of the motor
shaft.
Step 5.2
Put the hexagon
adaptor into the
pulley.
Step 5.3
Put the pulley and
the Active Brush
gear in their
places.

Supreme M4 Assembly Instructions
Page 7of 18
Step 5.4
Place the track
in its place as
shown on both
sides of the
robot.
Step 5.5
Assemble the
track safety
cover on the
side panel.
Step 5.6
Put the side
panel into its
place.

Supreme M4 Assembly Instructions
Page 8of 18
Step 5.8
Secure the side
panel in place
with 4 KA50X20
screws.
Step 5.9
Make sure the
side panel clips
are in their places
as shown in the
picture

Supreme M4 Assembly Instructions
Page 9of 18
6. Assembling the driving system and Side Cover
on the other side of the robot
Step 6.1
Place the guide
wheels and pulley
on the other side
of the frame.
Step 6.2
put the track in
place as shown.

Supreme M4 Assembly Instructions
Page 10 of 18
7.
3
Step 6.3
Assemble the side
panel with the
fins facing out.
Step 6.4
Make sure the
side panel clips
are in their places
as shown in the
picture
Step 6.5
Secure the side
panel in place
with 4 KA50X20
screws.

Supreme M4 Assembly Instructions
Page 11 of 18
7. Assembling the Floating Cable
Step 7.1
Insert the floating
cable to the
motor unit.
Step 7.2
Connect the
cable's retrofit to
motor unit (mind
the slot shape)
and press it
firmly.
Step 7.3
Press the seal
firmly to the
terminal.
Step 7.4
Tighten the nut
properly by hand.
4.
4
Note:
There is only
one way for
the connector
to connect to
the motor
unit terminal.

Supreme M4 Assembly Instructions
Page 12 of 18
Step 7.5
Position the
floating cable on
the motor unit.
Step 7.6
The cable position
on the motor
unit.
Step 7.7
Secure the cable
holders with 4X
KA50X12 screws.
Note:
Screw
the cable
holders
screws
gently.

Supreme M4 Assembly Instructions
Page 13 of 18
8. Positioning the Float
Step 8.1
Place the float on
the motor unit,
on the drive
motor side as
shown.
Note:
The drive
motor
side.

Supreme M4 Assembly Instructions
Page 14 of 18
9. Positioning the Brush Covers
Step 9.1
Position the 2
brush safety
covers.

Supreme M4 Assembly Instructions
Page 15 of 18
10. Assembling the Outer Casing
Step 10.1
Place the outer
casing on the
frame.
Step 10.2
Secure the outer
casing to the
frame with 4X
KA50X20 screws.
Note:
Make sure the
casing seats
well on the
brush safety
covers.

Supreme M4 Assembly Instructions
Page 16 of 18
11. Assembling the Impeller Cover
Step 11.1
Place the cable
support in its
place on the outer
casing before
closing the
impeller cover.
Step 11.2
Position the
impeller cover
diagonally on the
outer casing.
Step 11.3
Secure the
impeller cover
with a KA50X12
screw.

Supreme M4 Assembly Instructions
Page 17 of 18
12. Assembling the Handle
Step 12.1
Position the
handle.
Step 12.2
Secure the handle
in place with 2
KA50X20 screws.
Note:
The
handle's
position

Supreme M4 Assembly Instructions
Page 18 of 18
13. Assembling the Brushes
Step 13.1
Place one brush
in place.
Step 13.2
Place the second
brush in its place
by pulling it
strongly towards
you.
Note:
Using a
screwdriver
makes it
easier to
insert the
brush in
place.

Supreme M4 Disassembly Instructions
Page 1of 10
Table of Contents
1. Dismantling the Handle .................................................................................................................... 2
2. Dismantling the Impeller Cover........................................................................................................3
3. Dismantling the Outer Casing........................................................................................................... 4
4. Dismantling the Cable ......................................................................................................................5
5. Disassembling the Motor Unit...........................................................................................................6
6. Dismantling the Side Panels ............................................................................................................. 7
7. Dismantling the Driving System .......................................................................................................8
8. Dismantling the Brushes ..................................................................................................................9
9. Dismantling the Diaphragms ..........................................................................................................10

Supreme M4 Disassembly Instructions
Page 2of 10
1. Dismantling the Handle
Step 1.1
Unscrew the 2
screws holding the
handle in place.
Step 1.2
Take the handle
off.