Maytronics Supreme M3 User manual

Supreme M3 Assembly
Table of Contents
1. Assembling the Motor Unit ............................................................................................................... 5
2. Assembling the Driving System and Side Cover................................................................................6
3. Assembling the Driving System and Side Cover on the other side of the robot.................................9
4. Assembling the floating cable ........................................................................................................10
5. Positioning the Float ......................................................................................................................12
6. Assembling the Outer Casing .........................................................................................................13
7. Assembling the Impeller Cover ...................................................................................................... 14
8. Assembling the Brushes .................................................................................................................15

Supreme M3 Assembly

Supreme M3 Assembly

Supreme M3 Assembly

Supreme M3 Assembly
1. Assembling the Motor Unit
Step 1.1
Assemble the
cover cork into
the Pulley's
place.
Step 1.2
Place the motor
unit in its place.
Note:
The drive
motor side
should be in
the opposite
side of the
cover cork.

Supreme M3 Assembly
2. Assembling the Driving System and Side
Cover
Step 1.3
Secure the
motor unit to
the frame with
4X KA50X30.
Step 2.1
Place the guide
wheels on the
side of the
motor shaft.
1.3

Supreme M3 Assembly
Step 2.2
Insert the
hexagon
adaptor into
the Pulley.
Step 2.3
Place the
track on the
Pulley.
Step 2.4
Put the Pulley
And the track
in their
places.
Note:
Make sure
the adaptor
is on the
motor
shaft.
Note:
There are two
types of
tracks –short
and long. Use
the longer
track in the
Pulley side.

Supreme M3 Assembly
Step 2.5
Put the side
panel with the
wheel on the
drive motor
side.
Step 2.6
Press on the
bottom of the
side panel to
fit the clips
into their
places.
Step 2.7
Secure the side
panel in place
with 4
KA40X20
screws.
Note:
The side
panel with
the wheel
should be in
the drive
motor side

Supreme M3 Assembly
3. Assembling the Driving System and Side
Cover on the other side of the robot
Step 3.1
Put the
shorter track
on the other
side of the
robot as
shown.
Step 3.2
Put the side
panel with the
fins into its
place.
Step 3.3
Secure the
side panel in
place with 4
KA40X20
screws.

Supreme M3 Assembly
4. Assembling the floating cable
Step 4.1
Pass the
cable through
the outer
casing as
shown.
Step 4.2
Insert the
floating cable
to the motor
unit.
Step 4.3
Press the
seal firmly to
the terminal.