MB QUART JC1-108 User manual

Page 1 of 4
Assembly Instructions
Model: Jeep JL (Wrangler) & JT (Gladiator)
Description: Top Dash Speaker Install
Part Number: JC1-108
Assembly Time: 30 Min
Parts List
No. Component Name Qty
1 3.5in Coaxial Speakers 2
1 Bojo or Panel Tool
2 Philips Screwdriver
38, 10, 13mm Socket
4 Rachet
Parts List
Tools Required
Before you beign, read thought these instructions and check that
all parts are present. Please note that MB Quart cannot assume any
responsibility for damage resulting from incorrect installation.

Top Dash Speaker
Page 2 of 4
● Unclip and remove dash grill
● Remove (2) Phillips screws,
disconnect wiring and remove
speaker from vehicle
● Connect the factory wires to the
speaker

Top Dash Speaker Install
Page 3 of 4
● Clip top dash grill into place
● Install speaker with (2) Phillips
screws

Page 4 of 4
JC1-108 REV 01
FCC Notication
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a mobile installation. This equipment generates uses and can radiate
radio frequency energy. If not installed and used in accordance with the instructions, this equipment
may cause harmful interference to radio communications. There is no guarantee that interference
will not occur in a particular installation.
WARNING: Changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment complied with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20cm
between the radiator and your body.