McGrathLocks MLNX5 User manual

1
MLNX5 Digital Lock

MLNX5 Digital Lock
Description
This 5 in 1 digital door lock represents a classic easy entry option for your
home. A stylish door lock with a Bluetooth App, pin code, RFID card and
fingerprint, manual key to provide quick and convenient access.
Specifications
▪Unlocking methods: Bluetooth App, RFID Card, Pass code, Fingerprint, Wristband or Key
▪App name: TT lock
▪Material: Aluminium Alloy
▪Colour: Black, Silver
▪Panel size: L 240(mm)*W 60(mm)
▪Communication mode: Bluetooth 4.0 above
▪Support system: Android 4.4 /IOS 7.0 above
▪Power supply: DC6V, 4pcs alkaline battery
▪Battery life: 10,000 times normal open (12 months)
▪Static current: 45Ua
▪Dynamic current: <200Ma
▪Unlock time: 1-1.5 seconds
▪IP Rating: IP65
2

MLNX5 Digital Lock
Mortises dimensions
3

MLNX5 Digital Lock
Lock Dimensions
4

MLNX5 Digital Lock
User Manual
5
INFORMATION AND SAFTY WARNINGS :
1.1 Introduction:
This user manual will guide you through the functions and usages of our MLNX5 Bluetooth enabled smart
lock. It is important that you follow the instructions and regard all notes that appear throughout this
manual. Consult this manual before you attempt to use the lock. If you have questions not answered by
this manual or are in need of non-routine service, contact our customer service (Phone Number)
1.2 Safety Warnings:
When reading this manual, note these icons: notes with this icon MUST be read, understood and
obeyed to prevent injury or damage.
General Usage:
▪This lock shall only be used as described in this manual.
▪Verify that all parts of the lock are account for. If any parts are missing, contact our customer service.
▪In factory default status, the lock is on always open state after you install the lock (no power on). It
means handle is free and lock can’t be closed, you have to power on the lock with batteries or set
admin and pair the lock with app and then the open mode will be changed to private mode
automatically.
▪Handle directions are reversible, please kindly follow chapter 4 (installation steps3) to change the
direction. Should you have any problem, please contact our customer service.
▪There is a protective film on the front touch panel, if there are some scratches on the film, don’t be
scared. The protective film can be removed if you need.
▪Use only four AA batteries. Do not mix old and new batteries or batteries from different brands. Never
insert objects into the lock other than batteries as described in this manual.
▪Verify all surfaces are flat and level before beginning installation, installation on doors or surface with
any types of deformity such as gaps or warping may cause the lock to malfunction or fail to operate
entirely.
▪Never apply any cleaner directly to any part of the lock. Only use clean water and mild cleaner on a
soft non-abrasive cloth when cleaning.
▪Potential shock warning: do not allow water or liquids to get into lock’s electric parts.
▪The lock must be used with TT lock app. The lock will function without the app but full functionality may
only be achieved when the app is used.

MLNX5 Digital Lock
User Manual
PREPARING TO INSTALL :
1.1 Line Drawing
Draw a horizontal centre line inside and outside the door at 1 meter from the ground. Fold
the hole template, make the handle
centre line align at the door horizontal centre line, then draw out the hole lines at front and
side.
1.2 Determining Lever Handing:
The hand of the door is determined from the secure side of the door. The term “secure” means the side from
which you initially unlock and enter from outside.
The hand of a door is determined from the secure side of the door. The term "secure" means the side from
which you initially unlock and enter.
6

MLNX5 Digital Lock
User Manual
7
EXPLODED VIEW :
1. Outer panel 6. Connecting screw 11. Front handle
2. Connecting column 7. Back handle 12. Knob
3. Lock body 8. Lock body fixing screw 13. Anti lock pick up
4. Square bar 9.Emergency power supply 14. Lock body
5. Battery case cover 10. Lock core 15. Setting key

MLNX5 Digital Lock
User Manual
SYSTEM SPECIFICATION :
Connectivity Bluetooth 4.0, Wi-Fi (Wi-Fi Bridge required)
Identification Mode TTLock App, Fingerprint, Card (Mifare 13.56 MHz), Code
and Bluetooth
User Capacity 120
Identification Time Instant recognition under 0.3 seconds
Code User-defined 4-8 digit
Keypad Backlight Yes
Temporary Code or Ekey Yes
Compatible Smartphone iOS7.0 or above, Android 4.4 or above
Remote Access Yes, Wi-Fi Gateway
Mechanical Key Override Yes
Micro-USB Backup Power
Interface Yes
Working Voltage 6 V (4 X Alkaline AA Batteries)
Working Temperature External Assembly: -4 °F ~ 149 °F (-20 °C ~ 65 °C)
Internal Assembly: 14 °F ~ 131 °F (-10 °C ~ 55 °C)
Battery Life Up to 12 months (10,000 times access)
Compatible Smart Home Eco-
system Alexa and Google Assistant (Wi-Fi Gateway is required)
Hardware Type Lever
Door Thickness 38 - 55 mm
Door Handing Reversible (Left and Right) 8
Case Material Aluminium Alloy
IP Rating IP65
Finish Satin Nickel or Black
Warranty 12 Months
Available Mortice 60mm
Tubular Latch 60mm,70mm
Working Humidity 10%~95%
Factory Passcode 123456, after setting, factory passcode will be invalid
WiFi Gateway Available(Optional)
Unlock time 1-1.5 seconds
Dynamic current <200mA
Static current 45uA

MLNX5 Digital Lock
User Manual
Change Handle :
9
1.Adjust the Front Handle Direction
1. Remove the cross screw in the figure, turn the handle
180 degrees in the direction of the arrow.
2. After adjusting the handle direction, install the screw and
complete the reversing.
ATTENTION: Hexagon screw is
fixed when changing the handle
direction.

MLNX5 Digital Lock
User Manual
10