McGrathLocks MLX2 User manual

1
MLX2

Description
This 4 in 1 digital lock has a dead bolt latch. A stylish lock with a Bluetooth
App, pin code, RFID card and manual key to provide quick and convenient
access.
Specifications
▪Unlocking methods: Bluetooth App, RFID Card, Pass code,Wristband or Key
▪App name: TT lock
▪Material: Aluminium Alloy
▪Colour: Black, Silver
▪Panel size: L 137(mm) W 60(mm)
▪Communication mode: Bluetooth 4.0 above
▪Support system: Android 4.4 /IOS 7.0 above
▪Power supply: DC6V, 4pcs alkaline battery
▪Battery life: 10,000 times normal open (12 months)
▪Static current: 30Ua
▪Dynamic current: <200Ma
▪Unlock time: 1-1.5 seconds
▪IP Rating: IP65
2
MLX2

System Specifications
Connectivity Bluetooth 4.0, Wi-Fi (Wi-Fi Bridge required)
Identification Mode TTLock App, Card (Mifare 13.56 MHz), Code and Bluetooth
User Capacity 250
Identification Time Instant recognition under 0.3 seconds
Code User-defined 6-8 digit
Keypad Backlight Yes
Temporary Code or Ekey Yes
Compatible Smartphone iOS7.0 or above, Android 4.4 or above
Remote Access Yes, Wi-Fi Gateway
Mechanical Key Override Yes
Micro-USB Backup Power Interface Yes
Working Voltage 6 V (4 X Alkaline AAA Batteries)
Working Temperature -20°C~70°C
Battery Life Up to 12 months (10,000 times access)
Compatible Smart Home Eco-system Alexa and Google Assistant (Wi-Fi Gateway is required)
Door Thickness 38 - 48 mm
3
Case Material Aluminium Alloy
IP Rating IP65
Finish Satin Nickel or Black
Warranty 24 Months
Dead Latch 60mm,70mm
Working Humidity 10%~95%
WiFi Gateway Available(Optional)
Unlock time 1-1.5 seconds
Dynamic current <200mA
Static current 30uA
Card Capacity 100
Pin code Capacity 150
Bluetooth capacity Unlimited
MLX2

4
INFORMATION AND SAFTY WARNINGS :
1.1 Introduction:
This user manual will guide you through the functions and usages of our MLX2 Bluetooth enabled smart
lock. It is important that you follow the instructions and regard all notes that appear throughout this
manual. Consult this manual before you attempt to use the lock. If you have questions not answered by
this manual or are in need of non-routine service, contact our customer service (Phone Number)
1.2 Safety Warnings:
When reading this manual, note these icons: notes with this icon MUST be read, understood and
obeyed to prevent injury or damage.
General Usage:
▪This lock shall only be used as described in this manual.
▪Verify that all parts of the lock are account for. If any parts are missing, contact our customer service.
▪In factory default status, the lock is on always open state after you install the lock (no power on). It
means handle is free and lock can’t be closed, you have to power on the lock with batteries or set
admin and pair the lock with app and then the open mode will be changed to private mode
automatically.
▪Handle directions are reversible, please kindly follow chapter 4 (installation steps3) to change the
direction. Should you have any problem, please contact our customer service.
▪There is a protective film on the front touch panel, if there are some scratches on the film, don’t be
scared. The protective film can be removed if you need.
▪Use only four AAA batteries. Do not mix old and new batteries or batteries from different brands. Never
insert objects into the lock other than batteries as described in this manual.
▪Verify all surfaces are flat and level before beginning installation, installation on doors or surface with
any types of deformity such as gaps or warping may cause the lock to malfunction or fail to operate
entirely.
▪Never apply any cleaner directly to any part of the lock. Only use clean water and mild cleaner on a
soft non-abrasive cloth when cleaning.
▪Potential shock warning: do not allow water or liquids to get into lock’s electric parts.
▪The lock must be used with TT lock app. The lock will function without the app but full functionality may
only be achieved when the app is used.
MLX2

5
MLX2
Door Preparation
1. Check door thickness and Door Frame.
Door frame≧110mm
Door thickness: 38-48mm
2. Check door open direction.
1. Door drill hole map
Packing List

6
A) Outdoor lock body * 1
B) Silicon gasket * 1
C) Mounting plate * 1
D) Indoor lock body * 1
E) Deadbolt * 1
F) Cylindrical sleeve bolt * 1
G) M4 x 25mm cross flat head bolt *1
H) M4 x 30mm cross flat head bolt * 3
I) M4 x 10mm cross flat head bolt * 2
J) M4 x 25mm cross flat head self-tapping screw * 4
K) Mechanical key * 2
L) Strike plate * 1
M) Latch holding plastic box * 1
MLX2

7
Installation Diagram
Step 1
According to the map drilling holes on the door.
Note:
1) Check the required backset (60mm or
70mm).
2) Align the template along the vertical
center
line of the deadbolt(E) at the desired
height, and
tape it to the door.
3) Mark the holes first, then start drilling.
Step 2
Install the deadbolt (E).
Note:
The deadbolt has TWO
backset
options: 60mm or 70mm,
please
adjust it by yourself.
Note: DO NOT Push the
latch out
before installation.
MLX2

8
Installation Diagram
Step 3 Step 4
Install outdoor unit (A). Install mounting plate (C).
Note: The cable goes through
the notch on the
lower right part of the mounting
plate at first.
Note: Cable goes
underneath
deadbolt.
Keep the
spindle
vertical.
MLX2

9
Installation Diagram
Step 5
Install indoor unit (D).
For Left-open door,
pls turn the switch to
L.
For Right-open door,
pls turn the switch to
R.
MLX2

10
Installation Diagram
Step 5
Install indoor unit (D).
Note: Cut the length
according to door thickness. VERTICAL
(for Right-open) HORIZONTAL (for Left-open)
Note:
(1) For Right-
open door, pls
put the lock
spindle
VERTICALLY
into the
deadbolt, and
the knob should
also be turned
to VERTICAL
position.
(2) For Left-
open door, pls
put the lock
spindle
VERTICALLY
into the
deadbolt, but
the knob should
be turned to
HORIZONTAL
position.
MLX2

11
Installation Diagram
Step 6 Step 7
Install 4 pieces AA Alkaline batteries.
Testing the lock by rotating the knob
on unit D and using mechanical key(K).
Mark and drill holes for strike.
MLX2

12
MLX2