MCM Electronics MARKCHARLES MISILLI User manual

MARKCHARLES MISILLI EGG COOKER
1 32 4
Pierce the
boom of each
egg with the
measuring cup.
Fill water to
desired line &
pour into Cooker.
Place eggs into
tray, booms up.
Cover and press
the power buon
to begin cooking.
MARKCHARLES MISILLI EGG COOKER
QUICK START GUIDE
GET COOKING
Style Quantity Time
So-Boiled 1-6 eggs 9 minutes
Medium-Boiled 1-6 eggs 12 minutes
Hard-Boiled 1-6 eggs 16 minutes

MARKCHARLES MISILLI EGG COOKER
POACHED EGGS
OMELETTES
1 2
Use cooking
spray to lightly
grease the tray.
Break an egg into
each poaching
section of the
tray.
1 2
Use cooking spray
to lightly grease
the egg bowl.
Mix 1-2 eggs in a
separate bowl
before pouring
into tray.
3 4
Fill water up to
the medium line
(for poaching
and omelees)
and pour into
Heating Plate.
Cover and press
the power
buon. When
the light turns
off, your eggs will
be ready to eat!

MARKCHARLES MISILLI EGG COOKER
TIMER AUTO-OFF
This egg cooker is equipped with a precision thermal sensor and will turn off
automatically (the light will go out) when the water has fully evaporated from
the heating plate and the eggs are done.
ATTENTION:
Do not unplug the unit while cooking. If you unplug the unit while cooking,
it will still be on when you plug it back in. If the unit does not detect water
on the heating plate, it will automatically shut off and will reset itself in a few
seconds.
Stock#: MEC-092013V2

CLEANING & MAINTENANCE
MARKCHARLES MISILLI EGG COOKER
Unplug the unit
& wait for it to cool
before cleaning.
The accessories and
lid are all top shelf
dishwasher safe!
Do not submerge the
main body in water.
Wipe down the main
body with a damp
cloth.
YOUR EGG COOKER WILL NOT RUST
You may notice mineral deposits on the heating plate aer a few uses. They
may appear like rust but they are merely the residue of natural minerals
present in your water.
To remove, simply clean the heating plate with a mild solution of water and
vinegar (10 parts water : 1 part vinegar) from time to time.
You can also clean the heating plate using a “magic eraser” type sponge and
warm water. Scrub gently using a circular motion to clean the heating plate.