MCM Electronics ICON 16 Series User manual

ICONI6Series
UsersGuide
Icon 16 version 6(C) copyrightMCM Electronics 2006
MCM ElectronicsMCM Electronics MCM ElectronicsMCM Electronics
MCM Electronics MCM ElectronicsMCM Electronics
MCM ElectronicsMCM Electronics
MCM Electronics MCM ElectronicsMCM Electronics
MCM ElectronicsMCM Electronics
MCM Electronics
www.msealarms.com.au

Contents2
TermsyouneedtoKnow3
KeypadIndicators4
KeypadKeys5
ArminganAreawithaUsercode6
DisarminganAreawithaUserCode7
IsolatingaSection8
UserCode-Programming9
MasterCode-Programming10
Test Functions11
Clock Functions12
Warranty13
Section List14
ImportantInformation16
page2
Contents
www.msealarms.com.au

page3
TT
TT
Termserms
ermserms
erms .....youmay needtoknow.....youmay needtoknow
.....youmay needtoknow.....youmay needtoknow
.....youmay needtoknow
AlarmAlarm
AlarmAlarm
Alarm -Thestateofasecuritysystemwhenan armed
sensorhas beenactivated.
AreaArea
AreaArea
Area -Agroupofsections that maybeindependantly
armed anddisarmed.Asecuritysystemmayhave
several areas.
AreaOffAreaOff
AreaOffAreaOff
AreaOff -All sectionsthat areprogrammedfor that Areaare
Disarmed,except sections programmed for24 Hour
mode.
AreaOnAreaOn
AreaOnAreaOn
AreaOn -All sectionsthat areprogrammedfor that Areaare
Armedexceptasectionwhichisisolated.
ArmingArming
ArmingArming
Arming -Toplaceasectionorpanelreadyto acceptanalarm.
CentralStationCentralStation
CentralStationCentralStation
CentralStation -Aplacewherealarms arereceivedand appropriate
actiontaken inresponse to thealarm.
DoorContactDoorContact
DoorContactDoorContact
DoorContact -Asensorwhichdetects theopeningofadoor.
EntryTimerEntryTimer
EntryTimerEntryTimer
EntryTimer -Atimer that isused to delaythe activationofanalarm
ExitTimerExitTimer
ExitTimerExitTimer
ExitTimer -Atimer used to delaythearmingofan Exit/Entrysection.
IsolateIsolate
IsolateIsolate
Isolate -Toinhibitorbypass oneormoresections fromarming.
PassivePassive
PassivePassive
Passive InfraRedInfraRed
InfraRedInfraRed
InfraRed -Asensorwhichdetectsmovementbysensing sudden
changesinInfraRed temperaturee.g.BodyHeat
Plug PackPlug Pack
Plug PackPlug Pack
Plug Pack -Atransformer whichconverts the240 VACMainsPower
to 16 VACto runthe SecuritySystem.
SealedSealed
SealedSealed
Sealed -Whenasection isArmed andhas not been
activated.
SilentSectionSilentSection
SilentSectionSilentSection
SilentSection -Asectionmaybe programmedto be silent.
i.e.does not trigger thesiren orstrobe inalarm.
SirenTimerSirenTimer
SirenTimerSirenTimer
SirenTimer -Atimerusedtolimit therunning time ofthesiren.
www.msealarms.com.au

KK
KK
Keypadeypad
eypadeypad
eypad --
--
-IndicatorsIndicators
IndicatorsIndicators
Indicators
SectionLightsSectionLights
SectionLightsSectionLights
SectionLights Thereareupto48sectionlightsonthekeypad.
-WhentheAreais inthe OFFOFF
OFFOFF
OFFmode,thesections for
that areaarenot armed(exceptfor24hour
sections)andtheSectionLights indicatethe
conditionof thesensor. WhentheSectionLight is
ON,thesensorisactivatede.g.doorcontact
detectingdooropenormotiondetectorsensing
movement. WhentheSectionLight isOFF the
sensorisnot activated.
-WhentheAreais inthe ONON
ONON
ONmode,thesectionsfor
thatareaarearmed. Ifthesectionlight is Flashing
thesensoris activatedand triggersthesirenand
strobelight (unless programmedtobesilent).This
alarmis transmittedto theCentralStation.When
thelightisout thesectionisnotactivated.
-WhentheAreahasbeenArmed,anexit timer
startsandholdsthesectionsthathavebeen
programmedforExitdelay disarmed.Thisallows
theusertoexit thepremiseswithout activatingthe
alarm.
-WhentheAreaisarmed,andtheExit timerhas
finished,Entryinto thepremisescanbemadeviaa
sectionthat hasEntrydelay.Thiswill start theEntry
delay. IftheAreais disarmedbeforetheEntry
DelayTimerexpires,therewill benoalarm.
PP
PP
Program Lightrogram Light
rogram Lightrogram Light
rogram Light -Whenfitted,thisLight will beONwhenaMastercodeisentered
andtheusercodesarebeingviewedorchanged.ProgramLight
isalso Onwhenausercodeis inIsolateorTest modes.
page4
www.msealarms.com.au

KK
KK
Keypadeypad
eypadeypad
eypad IndicatorsIndicators
IndicatorsIndicators
Indicators .....cont'd.....cont'd
.....cont'd.....cont'd
.....cont'd
page5
PP
PP
Power Lightower Light
ower Lightower Light
ower Light Thislight isnormallyON.This indicatesthatthePlugPackpower
andbackupbatteryarenormal.
-Whenthemainshasfailedthepowerlightwill single flash.
-Whenthebatteryis lowinvoltage,thepowerlightwill double flash.
-Fast flashwhile inProgrammode.
AreaArea
AreaArea
Area -ONwhentheAreais armed.
-Single flashwhentheAreaisarmedandtheExittimerisrunning.
-Double flashwhenasectioninAlarmforthat AreaortheEntry
timeris running.
-OFF indicatesAreais notArmed.
KK
KK
Keypadeypad
eypadeypad
eypad KK
KK
Keyseys
eyseys
eys
0-9K0-9K
0-9K0-9K
0-9Keyseys
eyseys
eys -Usedtoenternumeric Codes orselect Functions.
TT
TT
Test Kest K
est Kest K
est Keyey
eyey
ey -Usedwhenavalid UserCodehas beenenteredtoenter
Test mode.
IsolateKIsolateK
IsolateKIsolateK
IsolateKeyey
eyey
ey -Usedwhenavalid UserCodehas beenenteredtoIsolateasection,
while ArmingtheSystem.
PP
PP
PartialKartialK
artialKartialK
artialKeyey
eyey
ey -Usedwhenavalid UserCodehasbeenenteredtoselectwhichArea
isto bearmedordisarmed
Off KOff K
Off KOff K
Off Keyey
eyey
ey -Usedwhenavalid UserCodehasbeenenteredtoDisarm all
areasassignedtothatusercode.
On KOn K
On KOn K
On Keyey
eyey
ey -Usedwhenavalid UserCodehas beenenteredtoArm theAreaor
Areasassignedtothatusercode.Also usedbytheMastercodeholder
to program.
www.msealarms.com.au

page6
Arming Areas witha UserCode
Notes:Notes:
Notes:Notes:
Notes:
1.Usercodes may beallocatedto controlanycombinationofAreas
andcanonlyArm andDisarmthesepreprogrammedAreas.
2.AnAreawill not Arm unless all sectionlights intheAreaareoutor
thesectionisIsolated.
3.IfaSectionisalreadyIsolatedbeforeArming,itwill remainIsolated
until theAreaisDisarmed.
4.PowerlightshouldbeONandnot flashing.(Unless PartialorIsolate
keyshavebeenpressed.)
5.Anysectionmaybeprogrammedto haveExitTime.TheExitTimer
starts as soonas theAreais ArmedandtheArealight starts flashing.
Thebeeperbeeps while theExittimerisrunning.
6.Exitonlyvia programmedExit/Entrysectionsintheareathat isbeing
Armed.
7.If theExit/ Entry sections arenot sealedwhentheexit timer
expires thenthesirenwill give a2secondwarningandtheentry
timeris started.Iftheareaisnot turnedOFF beforetheentrytime
expires afull siren/ strobeandalarm transmissiontothe
CentralStationwill occur.
8.Whenausercodeisentered, all theAreasthat thecodeis
permittedto controlareselectedforarming.Tolimitwhichareas
areselected, thePartorPartialkeymaybepressed.Specific
Areas maythenbeselectedforArming.
9.WhenPartialAreaarmingisselected,theareaindicators willbe
ONif theAreaisArmed, OFF iftheAreaisnot Armedorflashingif
itisselectedforpartialAreaArming.
KeySequenceOperation
Example shows aUserCode1 23 4
1234 On beingusedto arm all it'sAreas .
1234 partial
Example shows aUserCode1 23 4
selectingpartialtoarm areas4and5.
45 On
www.msealarms.com.au

page7
Disarming Areas witha UserCode
Notes:Notes:
Notes:Notes:
Notes:
1.UsercodescanbeallocatedtocontrolanycombinationofAreas
andcanonlyArm andDisarmthesepreprogrammedAreas.
2.Thiskeysequence alsoacknowledgesorsilencesthesiren/strobeif
analarm isactivated.
3.Whenausercodeisentered,all theareasthat thecodeispermitted
to controlareselectedfordisarming. Tolimitwhichareasare
selected,thepartialkeymaybepressedthenspecific Areasmaybe
selectedforDisarming.
4.All non24 hoursectionsthat areisolatedwill beDe-Isolatedwhenan
areaisdisarmed.
KeySequenceOperation
Example shows aUserCode1 23 4
1234 Off beingusedto dis-arm all it'sAreas.
(IsolatedSectionswill SlowFlash)
1 234 partial Example shows aUserCode1 23 4
selectingpartialmodetodis-arm
areas4and5.
45 Off
www.msealarms.com.au

page8
Isolating a Section
Notes:Notes:
Notes:Notes:
Notes:
1.Whenavalid usercodehasbeenenteredandtheisolatekey hasbeen
pressed,all isolatedsectionswill beSlowFlashing.Anysectionmay
beSelectedorDe-Selectedand onlysectionsthatareSlow Flashing
will beisolatedwhentheAreaisOn.
2.AnAreamaybearmedordisarmedwithsectionsIsolated.Only
sectionsthatareallocatedtotheAreabeingarmedmay beisolated.
Anyothersectionthathas beenselectedforisolationwill beignored.
3.Ifdisarminganareathenonly 24hoursectionsmaybeisolated.
4.Whenenteringsectionnumbersatwo digit numbermust beused.
5.Only valid sectionnumbersmaybeentered.
6.Non24hoursectionsareautomaticallyde-isolatedwhentheAreais
turnedOFF.
KeySequenceOperation
Example shows aUserCode1 23 4
1234 isolate beingusedto enterIsolationmode.
04 Sections 4and 7arebeingIsolatedin
the AreatheUserCodeisallocated.
07
Whendesiredsectionsareisolated
the AreatoONmode.
On
www.msealarms.com.au

page9
ChangingUserCodes Functions01-80
Notes:Notes:
Notes:Notes:
Notes:
1.DefaultUserCode01is.. 1111withAreas1,2,3,4,5,6,7,8.
2.Usercodes are4digitslongandcanbeallocatedto controlany
combinationofareas.
3.Usercodesareusedto changethestatus of panel,isolatesectionsor
acknowledgealarms.
4.Usercodescannot bethesameorwithinonecount ofanotherUser
codeorbethefirst 4digitsofthe6digitMasterCodeorTechnician
Code.
5.TochangeUsercodesall areasmust beintheOFF mode.
6.Area9isnot aphysicalareabut isusedto limitaccess to panel test functions
andprintrequests. (Enablearea9fortheusercodethat will beusedfortest
functionsandprintrequests.)
7.Area10isnot aphysicalareabut isusedtoinhibitauser'sabitlity to
isolateasection.
8. TodeleteausercodeTodeleteausercode
TodeleteausercodeTodeleteausercode
Todeleteausercodeentertheisolatekeyasthenewcode.
KeySequenceOperation
218572 On Example shows Mastercode
218572usedtoenter
programmode.
0 1 SelectaUsercode(01-80).
Example shows 01..
..
.
1234On EnterandStorenew user
code12 34.
01 partial SelectUsercode01
areaallocationmode.
0405On Selectarea4and5thenstore.
Finishselectionandexit
areaallocationmode.
02 isolate On Selectanddeleteuser02.
Off Exitprogrammode.
www.msealarms.com.au

Changing theMasterCode Function00
Notes:Notes:
Notes:Notes:
Notes:
1.Mastercodedefaultis218572.
2.Mastercodeis6digits long.
3.TheMastercodeisonly usedto programtheusercodes. Itcannot
changethestatusofthesystem.
4.AllAreasmust beintheOFF modetoenterthemastercode.
KeySequenceOperation
218572 On EnterexistingMastercode
218572usedtoenter
programmode.
00 Selectfunction00
246812 On Enternewmastercode
246812
Off Exitprogrammodewith
theOFF key.
page10
www.msealarms.com.au