MDT Glass Push Button II Smart Series User manual

MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Tel.: [phone] • Fax: [phone] • [e-mail] • www.mdt.de
State 10/2017 Version 1.0
Technical Manual
MDT Glass Push Button II Smart
BE-GT20W.01
BE-GT20S.01
BE-GT2TW.01
BE-GT2TS.01

Technical Manual Glass Push Button II Smart BE-GT2xx.01
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Tel.: [phone] • Fax: [phone] • [email protected] • www.mdt.de
2
1 Content
1 Content ................................................................................................................................................. 2
2 Overview ............................................................................................................................................... 4
2.1 Overview devices ........................................................................................................................... 4
2.1.1 Special functions of the Glass Push Button II Smart............................................................... 4
2.2 Usage & Possible Applications....................................................................................................... 5
2.3 Exemplary Circuit Diagrams........................................................................................................... 6
2.4 Structure & Handling ..................................................................................................................... 6
2.5 Settings at the ETS-Software ......................................................................................................... 7
2.6 Commissioning .............................................................................................................................. 7
2.7 Reload Symbols ............................................................................................................................. 7
3 Communication Objects ....................................................................................................................... 8
3.1 Overview and Usage ...................................................................................................................... 8
3.2 Default settings of the communication objects .......................................................................... 22
4 Reference ETS-Parameter .................................................................................................................. 27
4.1 Operation / Display ..................................................................................................................... 27
4.1.1 General Settings ................................................................................................................... 27
4.1.2 Display Settings .................................................................................................................... 28
4.1.3 Information screen ............................................................................................................... 33
4.2 Push Button functions ................................................................................................................. 40
4.2.1 Activation / Selection ........................................................................................................... 40
4.2.2 Level setting .......................................................................................................................... 42
4.2.3 Overview: Two-button function / Single-button function ................................................... 43
4.2.4 Slap-/Cleaning function ........................................................................................................ 44
4.3 Push button functions ................................................................................................................. 46
4.3.1 Switch ................................................................................................................................... 47
4.3.1.1 Switch with the two-button function ............................................................................ 48
4.3.1.2 Sub-function: Switch ..................................................................................................... 48
4.3.1.3 Sub-function: Toggle ..................................................................................................... 49
4.3.1.4 Sub-function: Send status ............................................................................................. 49
4.3.1.5 Sub-function: Send status with on-delay ...................................................................... 50
4.3.1.6 Sub-function: Send status with off-delay ...................................................................... 51
4.3.1.7 Presentation on display ................................................................................................. 52
4.3.2 Send values ........................................................................................................................... 53

Technical Manual Glass Push Button II Smart BE-GT2xx.01
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Tel.: [phone] • Fax: [phone] • [email protected] • www.mdt.de
3
4.3.2.1 Switching values/scenes (up to 4 values) ...................................................................... 53
4.3.2.2 Shift value ...................................................................................................................... 56
4.3.2.3 Send value ..................................................................................................................... 58
4.3.2.4 Send value after state .................................................................................................... 59
4.3.2.5 Presentation .................................................................................................................. 60
4.3.3 switch/send value short/long (with 2 objects) ..................................................................... 61
4.3.4 Scene .................................................................................................................................... 64
4.3.5 Blind ...................................................................................................................................... 67
4.3.6 Dimming ............................................................................................................................... 70
4.3.7 HSV color control .................................................................................................................. 72
4.3.8 Color temperature (Tunable White) ..................................................................................... 74
4.3.9 Mode selection ..................................................................................................................... 76
4.3.10 Temperature shift ............................................................................................................... 79
4.4 State LED ...................................................................................................................................... 83
4.4.1 LED basic settings ................................................................................................................. 83
4.4.2 LED 1-12/A/B ........................................................................................................................ 84
4.4.2.1 Priority ........................................................................................................................... 86
4.5 Logic ............................................................................................................................................. 87
4.5.1 Logic basic settings ............................................................................................................... 87
4.5.2 Logic 1-4................................................................................................................................ 87
4.5.2.1 Logic 1-4 submenu ........................................................................................................ 89
4.6 Temperature measurement ........................................................................................................ 90
5 Index ................................................................................................................................................... 92
5.1 Register of illustrations ................................................................................................................ 92
5.2 List of tables................................................................................................................................. 94
6 Attachment ......................................................................................................................................... 96
6.1 Statutory requirements ............................................................................................................... 96
6.2 Routine disposal .......................................................................................................................... 96
6.3 Assemblage .................................................................................................................................. 96
6.4 Datasheet .................................................................................................................................... 97

Technical Manual Glass Push Button II Smart BE-GT2xx.01
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Tel.: [phone] • Fax: [phone] • [email protected] • www.mdt.de
4
2 Overview
2.1 Overview devices
The description refers to the following devices (order number in bold):
BE-GT20W.01 Glass Push Button II Smart, white
oSecond generation of Glass Push Button with up to 12 key functions
BE-GT20S.01 Glass Push Button II Smart, black
oSecond generation of Glass Push Button with up to 12 key functions
BE-GT2TW.01 Glass Push Button II Smart, white, temperature sensor
oSecond generation of Glass Push Button with up to 12 key functions and
integrated temperature sensor
BE-GT2TS.01 Glass Push Button II Smart, black, temperature sensor
oSecond generation of Glass Push Button with up to 12 key functions and
integrated temperature sensor
2.1.1 Special functions of the Glass Push Button II Smart
The Glass Push Button II Smart has a very extensive application with the following special functions:
Large RGB color display for visualization
Large, active color display for function- and status indication can be freely parameterized by the user.
The symbols and colors are freely selectable!
Symbols can be reloaded via DCA App
A free DCA app can be used to reload and parameterize any image of the size 64x64 pixels!
Can be used as a 4/6/8/12-button
Up to 3 levels with up to 4 functions per level can be activated. Thus, the button can control up to 12
functions. The levels as well as the functions can be named individually. The selection of the levels is
made via the upper two buttons, the call of the individual functions via the 4 buttons below.
Extensive application
The function range of the application exceeds that of a "normal" push button by a multiple. In
addition to the usual functions such as blinds, switching, dimming, scene, the user is also provided
with functions for controlling the HSV color circle or a function for controlling the color temperature
(Tunable White). The button contains special symbols to control and visualize these functions!
RGB State LEDs
An RGB status LED is available to the user for each function. This can visualize both, a keystroke as
well as an external or internal status with any color.

Technical Manual Glass Push Button II Smart BE-GT2xx.01
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Tel.: [phone] • Fax: [phone] • [email protected] • www.mdt.de
5
Logic functions
By means of a total of 4 logic functions it is also possible to realize interleaved function calls, e.g. to
release a scene call only in day mode. The logic function can process both internal and external states.
“lap funtion
The "Slap" function, which is triggered by the simultaneous touching of 3 or more keys, allows
intuitive operation. By this function, e.g. the light can be switched on when entering the room
without the operator having to search for the exact position of the individual keys.
Info-Display
In standby mode up to 4 status elements can be displayed. These status elements can visualize any
values of the KNX bus as well as the time or 14 byte status texts.
Message function
A total of 4 1-bit alarms are available, which can display predefined messages. For example, the
opening of a window or a motion can be reported. There is also a 14 byte message object which can
display text messages sent via the bus.
Long Frame Support
Supports the transmission of longer telegrams and thus of more user data per telegram. This
significantly shortens the programming time (as of ETS5).
Requirement: The use of a programming interface which supports the transmission of long frames,
e.g. MDT SCN-USBR.01 or SCN-IP000.02/SCN-IP100.02.
2.2 Usage & Possible Applications
The buttons have all the functions of a modern KNX switch and are designed for flush mounting. By
means of a keystroke, the pushbutton can carry out parameterized functions, e.g. scenes or dimming.
All models have a large color display and 6 buttons, which are equipped with RGB LEDs. For each
function specific symbols and colors can be parameterized. All buttons can be parameterized as 4-/6-
/8- or 12-fold push button. The selection of the functions 7 to 12 is controlled via levels. Furthermore,
the buttons have a brightness sensor with which the button can dynamically adapt to the ambient
brightness. 4 logic blocks, a cleaning function and a "Slap function" complete the performance
spectrum of the push buttons.
The pushbuttons of the BE-GT2T version also have an integrated temperature sensor, which can be
used for room temperature detection. The BE-GT2T version has additional functions for controlling
the integrated controller of the MDT heating actuator.

Technical Manual Glass Push Button II Smart BE-GT2xx.01
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Tel.: [phone] • Fax: [phone] • [email protected] • www.mdt.de
6
2.3 Exemplary Circuit Diagrams
Figure 1: Exemplary circuit diagrams
2.4 Structure & Handling
The following figure shows the structure of the Glass Push button II Smart:
Figure 2: Structure & Handling
1, 2, 3, 4, 5, 6 = Sensor surfaces for operating the key functions
7, 8 = To be pressed simultaneously to enter the programming mode
9 = RGB-Status indication
10 = Bus connection terminal

Technical Manual Glass Push Button II Smart BE-GT2xx.01
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Tel.: [phone] • Fax: [phone] • [email protected] • www.mdt.de
7
2.5 Settings at the ETS-Software
Selection in the product database
Manufacturer: MDT Technologies
Product family: Glass Push Button II Smart
Medium type: Twisted Pair (TP)
Product name: addicted to the used type, e.g.: GT2TW.01
Order number: addicted to the used type, e.g.: GT2TW.01
2.6 Commissioning
After wiring the device, the assignment of the physical address and the programming of the
application follows:
(1) Connect the interface with the bus, e.g. MDT USB Interface
(2) Set bus power up
(3) Activate the programming mode by pressing buttons 7 and 8 on the device simultaneously,
(Status LEDs on the right and left side of the button alternately flash red)
(4) Loading of the physical address out of the ETS-Software by using the interface (Red LEDs will
turn off as soon as this is successfully completed)
(5) Loading of the application, with requested parameterization
(6) If the device is enabled you can test the requested functions (also possible by using the ETS-
Software)
2.7 Reload Symbols
Any symbols can be loaded into the device. To do this, a DCA app "MDT Glass Push Button II Smart"
has to be downloaded and installed from the MDT website or the my.knx.org shop. The images to be
uploaded must meet the following requirements:
Format: Bitmap
Size: 64x64 Pixel
Color: Black/White
Usage: ETS5 or higher

Technical Manual Glass Push Button II Smart BE-GT2xx.01 MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Tel.: [phone] • Fax: [phone] • [e-mail] • www.mdt.de 3 Communication Objects 3.1 Overview and Usage The following table shows the available objects and their usage:
No.
Name
Object function
Data Point
Direction
Info
Usage
Note
Objects per push button:
0
Push button 1 Push buttons 1/2
Blind Blind Up/Down
DPT 1.008
send
Push button sends Up/Down command
Shutter actuator
Communication object is displayed when the button is set to lid
0
Push button 1 Push buttons 1/2
Dimming On/Off
DPT 1.001
send
Push button sends On/Off command
Dimming actuator
Communication object is displayed when the button is set to diig
0
Push button 1 Push buttons 1/2
Switch Switch On/Off
DPT 1.001
send
Push button sends On/Off command
Switch actoator, etc.
Communication object is displayed when the button is set to sith
0
Push Button 1
Toggle
DPT 1.001
send
Push button sends On/Off command
Switch actoator, etc.
Communication object is displayed when the single button is set to sith –
toggle
0
Push Button 1
Send status
DPT 1.001
send
Push button sends On/Off command
Switch actoator, etc.
Communication object is displayed when the single button is set to Switch – send
status

Technical Manual Glass Push Button II Smart BE-GT2xx.01 MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Tel.: [phone] • Fax: [phone] • [e-mail] • www.mdt.de
0
Push button 1 Push buttons 1/2
HSV control On/Off
DPT 1.001
send
Push button sends On/Off command
LED controller, etc.
Communication object is displayed when the button is set to „HSV olor otrol and
here only at setting „V Value
0
Push button 1 Push buttons 1/2
Decimal value
DPT 5.005
send
Push button sends Decimal value (0-255)
Dimming actuator, Shutter actuator, etc.
Communication object is displayed when the button is set to sed alue
0
Push button 1 Push buttons 1/2
Percentage value
DPT 5.001
send
Push button sends Percent value (0-100%)
Dimming actuator, Shutter actuator, etc.
Communication object is displayed when the button is set to sed alue
0
Push button 1 Push buttons 1/2
Scene
DPT 1.001
send
Push button sends Scene command
any actuators
Communication object is displayed when the button is set to sed alue
0
Push button 1 Push buttons 1/2
Forcible control
DPT 2.002
send
Push button sends forcible control value
Presence detector, etc.
Communication object is displayed when the button is set to sed alue
0
Push button 1 Push buttons 1/2
Temperature value
DPT 9.001
send
Push button sends absolute temperature
Heating actuator, temperature control, etc.
Communication object is displayed when the button is set to sed alue
0
Push button 1 Push buttons 1/2
Brightness value
DPT 9.004
send
Push button sends absolute brightness value
Weather station, Clouding, etc.
Communication object is displayed when the button is set to sed alue

Technical Manual Glass Push Button II Smart BE-GT2xx.01 MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Tel.: [phone] • Fax: [phone] • [e-mail] • www.mdt.de
0
Push button 1 Push buttons 1/2
RGB value
DPT 232.600
send
Push button sends absolute RGB value
LED controller, etc.
Communication object is displayed when the button is set to sed alue
0
Push buttons 1/2
Setpoint shift
DPT 1.001/ DPT 6.010/ DPT 9.002/ DPT 9.001
send
Push button sends setpoint shift / new setpoint
Heating actuator, temperature controller
Only for glass push button with temperature sensor! Communication object is displayed when the function is set to "temperature shift" ; Size of the object depending on the type of temperature shift
0
Push button 1 Push buttons 1/2
Mode Selection (HVAC Mode)
DPT 20.102
send
Push button sends mode
Heating actuator, temperature controller
Only for glass push button with temperature sensor! Communication object is displayed when the function is set to ode seletio
1
Push buttons 1/2
Stop/Slats Open/Close
DPT 1.001
send
Push button sends Stop/Step command
Shutter actuator
Communication object is displayed when the button is set to lid futio
1
Push Button 1
Slats/Stop
DPT 1.009
send
Push button sends Stop/Step command
Shutter actuator
Communication object is displayed when the single button is set to lid futio
1
Push Button 1/ Push Button 1 short
Value for toggle
DPT 1.001
receive
Push button receives status of the switched actuator channel
Switch actuator, Dimming actuator, etc.
Communication object is displayed when the single button is set to toggle function

Technical Manual Glass Push Button II Smart BE-GT2xx.01 MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Tel.: [phone] • Fax: [phone] • [e-mail] • www.mdt.de
1
Push Button 1 short
Push Buttons 1/2 short
State State for display
DPT 1.001
receive
Push button receives status of the switched actuator channel
Switch actuator, Dimming actuator, etc.
Communication object is displayed when the button is to visualize a switching telegram
1
Push Button 1 short
Push Buttons 1/2 short
State of percent value
DPT 5.001
receive
Push button receives status value of the switched actuator channel
Shutter actuator, Dimming actuator, etc.
Communication object is displayed when a percentage value is to be visualized
1
Push Button 1 short
Push Buttons 1/2 short
State of decimal value
DPT 5.005
receive
Push button receives status value of the switched actuator channel
Shutter actuator, Dimming actuator, etc.
Communication object is displayed when a decimal value is to be visualized
1
Push Button 1 short
Push Buttons 1/2 short
State of temperature value
DPT 9.001
receive
Push button receives current temperature/ current setpoint
Heating actuator, temperature control, etc.
Communication object is displayed when a temperature value is to be visualized
1
Push Button 1 short
Push Buttons 1/2 short
State of brightness value
DPT 9.004
receive
Push button receives current brightness value
Weather station, Clouding, Status.
Communication object is displayed when a brightness value is to be visualized
1
Push Button 1 short
Push Buttons 1/2 short
Dimming
DPT 3.007
send
Push button sends dimming command
Dimming actuator, etc.
Communication object is displayed when the button is activated as diig
1
Push Button 1 short
Push Buttons 1/2 short
Change HSV Hue/Saturation/Value relative Change color temperature relative
DPT 3.007
send
Push button sends dimming command
Dimming actuator, LED controller, DALI-Gateway, etc.
Communication object is displayed when the button is set to HSV olor otrol or
olor temperature

Technical Manual Glass Push Button II Smart BE-GT2xx.01 MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Tel.: [phone] • Fax: [phone] • [e-mail] • www.mdt.de
1
Push buttons 1/2
State actual temperature
DPT 9.001
receive
Push button receives a- temperature value
Temperature sensor, etc.
Only for glass push button with temperature sensor! Communication object is displayed when the function is set to "temperature shift" and an external temperature sensor is used
1
Push button 1 Push buttons 1/2
State HVAC Mode/ State HVAC Status
DPT 20.102/ ohne
receive
Push button receives current set mode/state
Heating actuator, temperature control
Only for glass push button with temperature sensor! Communication object is displayed when the function is set to ode seletio and
Status displa is activated
2
Push button 1 long
Switch
DPT 1.001
send
Push button sends On/Off command
Switch actuator, etc.
Communication object is displayed when the button is activated as a short/long switch
2
Push button 1 long
Toggle
DPT 1.001
send
Push button sends On/Off command
Switch actuator, etc.
Communication object is displayed when the button is activated as a short/long switch
2
Push Button 1
Value for toggle
DPT 1.001
receive
Push button receives status of the switched actuator channel
Dimming actuator
Communication object is displayed when single-button-
function is set to "dimming"
2
Push Button 1
Value for change of direction
DPT 1.008
receive
Push button receives status of the switched actuator channel
Shutter actuator
Communication object is displayed when single-button-
function is set to "blind"

Technical Manual Glass Push Button II Smart BE-GT2xx.01 MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Tel.: [phone] • Fax: [phone] • [e-mail] • www.mdt.de
2
Push button 1 long Push buttons 1/2 long
Decimal value
DPT 5.005
send
Push button sends decimal value (0-255)
Dimming actuator, Shutter actuator, etc.
Communication object is displayed when the button is activated as a short/long switch
2
Push button 1 long Push buttons 1/2 long
Percent value
DPT 5.001
send
Push button sends percentage value (0-100%)
Dimming actuator, Shutter actuator, etc.
Communication object is displayed when the button is activated as a short/long switch
2
Push button 1 long Push buttons 1/2 long
Scene
DPT 1.001
send
Push button sends Scene command
Any actuators
Communication object is displayed when the button is activated as a short/long switch
2
Push button 1 long Push buttons 1/2 long
Forcible control
DPT 2.002
send
Push button sends Forcible control value
Presence detector, etc.
Communication object is displayed when the button is activated as a short/long switch
2
Push button 1 long Push buttons 1/2 long
Temperature value
DPT 9.001
send
Push button sends absolute temperature
Heating actuator, temperature control, etc.
Communication object is displayed when the button is activated as a short/long switch
2
Push button 1 long Push buttons 1/2 long
Brightness value
DPT 9.004
send
Push button sends absolute brightness value
Weather station, Clouding, etc.
Communication object is displayed when the button is activated as a short/long switch
2
Push button 1 long Push buttons 1/2 long
RGB value
DPT 232.600
send
Push button sends absolute RGB value
LED controller, etc.
Communication object is displayed when the button is activated as a short/long switch

Technical Manual Glass Push Button II Smart BE-GT2xx.01 MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Tel.: [phone] • Fax: [phone] • [e-mail] • www.mdt.de
2
Push buttons 1/2
State current setpoint temperature
DPT 9.001
receive
Push button receives current setpoint temperature
Heating actuator, temperature controller
Only for glass push button with temperature sensor! Communication object is displayed when the two- button-function is set to "temperature shift"
3
Push button 1 long
Value for toggle
DPT 1.001
receive
Push button receives status of the switched actuator channel
Switch actuator, Dimming actuator, etc.
Communication object is displayed when the button is activated as a short/long switch
3
Push button 1 Push buttons 1/2
State for display
DPT 1.001
receive
Push button receives status of the switched actuator channel
Switch actuator, Dimming actuator, etc.
Communication object is displayed when the button is to visualize a switching telegram
3
Push button 1 Push buttons 1/2
State for display
DPT 5.001 DPT 5.005
receive
Push button receives status of the switched actuator channel
Switch actuator, Dimming actuator, etc.
Communication object is displayed when a percent/decimal value is to be visualized
3
Push button 1 long Push buttons 1/2 long
State percent value State decimal value
DPT 5.001 DPT 5.005
receive
Push button receives status of the switched actuator channel
Switch actuator, Dimming actuator, etc.
Communication object is displayed when a percent/decimal value is to be visualized
3
Push button 1 Push buttons 1/2
State for Hue (H)
DPT 5.003
receive
Push button receives status of the switched actuator channel
LED controller, etc.
Communication object is displayed when button is set to H“V olor otrol ad futio seletio to H

Technical Manual Glass Push Button II Smart BE-GT2xx.01 MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Tel.: [phone] • Fax: [phone] • [e-mail] • www.mdt.de
3
Push button 1 Push buttons 1/2
State for Saturation (S)/ Value (V)
DPT 5.001
receive
Push button receives status of the switched actuator channel
LED controller, etc.
Communication object is displayed when button is set to H“V olor otrol ad futio seletio to “ or V
3
Push button 1 Push buttons 1/2
State for color temperature
DPT 5.001/ DPT 7.xxx
receive
Push button receives status of the switched actuator channel
LED controller, DALI-Gateway etc.
Communication object is displayed when button is set to olor teperature
3
Push button 1 long Push buttons 1/2 long
State of temperature value
DPT 9.001
receive
Push button receives current temperature/ current setpoint
Heating actuator, temperature control
Communication object is displayed when a temperature value is to be visualized
3
Push button 1 long Push buttons 1/2 long
State of brightness value
DPT 9.004
receive
Push button receives current brightness value
Weather station, Clouding, Status
Communication object is displayed when a brightness value is to be visualized
3
Push buttons 1/2
State Setpoint shift/ State Basis comfort setpointt
DPT 6.010/ DPT 9.002/ DPT 9.001
receive
Push button receives status about current setpoint shift
Further Glass Push Button II Smart which send a Setpoint shift, etc.
Only for glass push button with temperature sensor! Communication object is displayed when the function "Temperature shift" has been activated and has to be connected to all objects which cause a setpoint shift in the controller to be controlled
4
Push button 1 Push buttons 1/2
Block object
DPT 1.003
receive
Taster empfängt Befehl zum Sperren der Taste
Visu, Time switch, operating buttons, etc.
Communication object is displayed when the blocking object for this button has been activated
+ 5
Next button
i

Technical Manual Glass Push Button II Smart BE-GT2xx.01 MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Tel.: [phone] • Fax: [phone] • [e-mail] • www.mdt.de
Objects for the Slap-function:
60
Slap-button short
Switch
DPT 1.001
send
Push button sends switch command
Switch actuator, etc.
Communication object is displayed when the Slap-button has been parameterized to "send value"
60
Slap-button short
Percent value Decimal value Scene Forcible control
DPT 5.001 DPT 5.005 DPT 17.001 DPT 2.001
send
Push button sends value
any actuators, presence detector, etc.
Communication object is displayed when the Slap-button has been parameterized to "send value"
60
Slap-button short
Temperature value
DPT 9.001
send
Push button sends absolute temperature value
Heating actuator, temperature control, etc.
Communication object is displayed when the Slap-button has been parameterized to "send value"
60
Slap-button short
Brightness value
DPT 9.004
send
Push button sends absolute brightness value
Weatherstation, Clouding, etc.
Communication object is displayed when the Slap-button has been parameterized to "send value"
60
Slap-button short
RGB-value
DPT 232.600
send
Push button sends absolute RGB valuet
LED controller, etc.
Communication object is displayed when the Slap-button has been parameterized to "send value"
61
Slap-button short
Value for toggle
DPT 1.001
receive
Push button receives status of actuator
Switch actuator, Dimming actuator, etc.
Communication object is displayed when the Slap-button has been parameterized to "toggle"
62
Slap-button long
Switch
DPT 1.001
send
Push button sends switch command
Switch actuator, etc.
Communication object is displayed when the Slap-button has been parameterized to "send value"

Technical Manual Glass Push Button II Smart BE-GT2xx.01 MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Tel.: [phone] • Fax: [phone] • [e-mail] • www.mdt.de
62
Slap-button long
Percent value Decimal value Scene Forcible control
DPT 5.001 DPT 5.005 DPT 17.001 DPT 2.001
send
Push button sends value
any actuators, presence detector, etc.
Communication object is displayed when the Slap-button has been parameterized to "send value"
62
Slap-button long
Temperature value
DPT 9.001
send
Push button sends absolute temperature value
Heating actuator, temperature control, etc.
Communication object is displayed when the Slap-button has been parameterized to "send value"
62
Slap-button long
Brightness value
DPT 9.004
send
Push button sends absolute brightness value
Weatherstation, Clouding, etc.
Communication object is displayed when the Slap-button has been parameterized to "send value"
62
Slap-button long
RGB-value
DPT 232.600
send
Push button sends absolute RGB value
LED controller, etc.
Communication object is displayed when the Slap-button has been parameterized to "send value"
63
Slap-button long
Value for toggle
DPT 1.001
receive
Push button receives status of actuator
Switch actuator, Dimming actuator, etc.
Communication object is displayed when the Slap-button has been parameterized to "toggle"
64
Slap-button
Blocking object
DPT 1.001
receive
Push button receives command for blocking of the slap-button
Visu, Time switch, operating buttons, etc.
Communication object is displayed when the blocking object for the Slap-button has been activated

Technical Manual Glass Push Button II Smart BE-GT2xx.01 MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Tel.: [phone] • Fax: [phone] • [e-mail] • www.mdt.de
Objects for the Logic function:
65
Logic
Input 1A
DPT 1.001
receive
Push button receives external logic input
State of actuator, etc.
Communication object is displayed when the logic function 1 and the external logic input have been activated
66
Logic
Input 1B
DPT 1.001
receive
Push button receives external logic input
State of actuator, etc.
Communication object is displayed when the logic function 1 and the external logic input have been activated
67
Logic
Output 1 Output 1 Scene Output 1 Value Output 1 Value
DPT 1.001 DPT 17.001 DPT 5.001 DPT 2.001
send
Push button sendsvalue when logic is fulfilled
any actuators, etc.
Communication object is displayed when logic function 1 has been activated
+ 3
next logic
Objects for the State LEDs:
77
LED 1
Switch
DPT 1.001
receive
Push button switches status LED on
Time switch, Status actuator, etc.
Communication object is displayed when "LED reacts to - external object /-and button activation" has been activated
+1
next LED
89/ 90
LED A/B
Switch
DPT 1.001
receive
Push button switches status LED on
Time switch, Status actuator, etc.
Communication object is displayed when several levels are active and "LED reacts to - External object/- button activation" has been activated
91
LED 1 Priority
Switch
DPT 1.001
receive
Push button switches status LED on with priority
Time switch, Status actuator, etc.
Communication object is displayed when the status LED and the LED priority have been activated
+ 1
next LED Priority

Technical Manual Glass Push Button II Smart BE-GT2xx.01 MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Tel.: [phone] • Fax: [phone] • [e-mail] • www.mdt.de
105
LED
Blocking object
DPT 1.003
receive
Blocking of all status LEDs
Time switch, operating buttons, etc.
Communication object is displayed when lock object for
LEDs i the eu LED asi settig is activated
common objects:
106
Day/Night
Input
DPT 1.002
receive
Umschalten zwischen Tag/Nacht Modus
Time switch, etc.
Communication object is permanently displayed
107
Presence
Input
DPT 1.001
receive
Taster schaltet in den Präsenz Betrieb
Presence detector, etc.
Communication object is permanently displayed
108
Temperature
Internal measurement / Mixed temperature internal/external
DPT 9.001
send
Taster sendet aktuellen Temperaturwert
Heating actuator, Temperature controller
Only for glass push button with temperature sensor! Communication object is displayed when the temperature measurement has been activated and is used to send the current temperature
109
Temperature
External measurement
DPT 9.001
send
Taster empfängt aktuellen Messwert
Temperature sensor
Only for glass push button with temperature sensor! Communication object is displayed if the parameter "external temperature value" is at least 10% external

Technical Manual Glass Push Button II Smart BE-GT2xx.01 MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Tel.: [phone] • Fax: [phone] • [e-mail] • www.mdt.de
110
Temperature
Maximum temperature
DPT 1.001
send
Push button sends a 1 when the lower message value is exceeded
Generating an alarm, etc.
Only for glass push button with temperature sensor! Communication object is displayed when the upper message value has been activated
111
Temperature
Minimum temperature
DPT 1.001
send
Push button sends a 1 when the lower message value is undercut
Generating an alarm, etc.
Only for glass push button with temperature sensor! Communication object is displayed when the lower message value has been activated
112
Time
Input
DPT 10.001
receive
Push button receives current time
Time switch, etc.
Communication object is permanently displayed
114
Time/Date
Input
DPT 19.001
receive
Push button receives current time and current date
Time switch, etc.
Communication object is permanently displayed
115 – 118
Message 1-4
Input
DPT 1.005
receive
Push button displays predefined message
Window contact, Status, etc.
Communication object is displayed when message 1-4 has been activated
119
Message Text
Input
DPT 16.000
receive
Push button displays received text as a message
Visu, etc.
Communication object is displayed when message text has been activated