Medic Therapeutics MT-PWRBANK-001 User manual

POWER BANK
User Manual
MT-PWRBANK-001
LIMITED LIFETIME WARRANTY
Your Medic Therapeutics Power Bank is backed by
a limited lifetime manufacturer’s warranty. Medic
Therapeutics will repair or replace your device at
any time should it fail due to a defect in material or
workmanship, subject to the certain limitations.
This limited warranty does not cover any damage that
results from unauthorized or improper use, service,
or repair. Further, it does not cover damage caused
by accident, impact, negligence, or normal wear and
tear. Should you discover your Medic Therapeutics
Power Bank is not functioning properly, please send
your device to our repair center for evaluation. If your
product cannot be repaired or serviced, we will reserve
the right to change it for a similar or newer model.
Please note that a flat rate of $35.00 will be charged
to cover a service evaluation fee and return shipping of
your device. All warranty claims must be accompanied
by a copy of your proof of purchase from an authorized
retailer. Please send your device, proof of purchase, and
a check or money order in the amount of $35.00 made
out to Medic Therapeutics to:
Address:
Medic Therapeutics Service Center
3069 Taft Street
Hollywood, FL 33021
Contact:
[email protected]

Please read all instructions carefully prior to use.
Retain this manual for future use and reference.
PRODUCT FEATURES:
With the supplied 3-in-1 charging cable, this power
bank charges a variety of mobile phones (Lightning, Type
C, or Micro interface cable options), Smart Watches,
Gaming Consoles, Music Devices and other 5V 1A
devices. Serves as an emergency power supply- anytime,
anywhere.
PRODUCT SPECIFICATIONS:
CHARGING PORTS & CABLES:
CHARGING YOUR DEVICES:
1. Connect the USB port of the supplied 3-in-1 cable to
the USB port of the power bank.
2. Choose the corresponding charging interface for
your device.
3. Once you connect the appropriate cable to your
device, charging will commence immediately.
CHARGING THE POWER BANK:
1. Connect the USB port of the supplied 3-in-1 cable to
an AC-powered USB adaptor, computer, or laptop.
2. Connect the micro interface cable of the supplied
3-in-1 cable to the power bank.
3. Once connected, a red led light will flash, indicating
that the power bank is being charged. The red light
will stop flashing and remain illuminated to indicate
that the device has been fully charged.
IMPORTANT SAFETY INSTRUCTIONS:
WARNING: When using this product, follow basic
precautions, including the following:
a. Close supervision is necessary when the power bank
in used near children to reduce the risk of injury.
b. Do not place your fingers or hand inside the product.
c. Do not expose the power bank to any liquids, rain, or
snow.
d. The use of a charger or power supply charger
that is not sold/recommended by the power bank
manufacturer may result in the risk of fire or injury.
e. Do not use the power bank in excess of its output
rate. Overloading outputs above the total rate may
result in the risk of fire or injury.
f. Do not disassemble the power bank. When service
or repair is required, take the battery bank to a
qualified service representative. Incorrect reassembly
may result in the risk of fire or injury.
g. Have servicing performed by a qualified
representative using only identical replacement
parts. This will ensure that the safety of the product
is maintained.
Product Name Medic Therapeucs Power Bank
Material Aluminum Alloy
Unit Size 92*22*22mm
Battery Capacity 2600mah Lithium baery
Baery Life Up to 500 cycle mes or more
DC Input 5V 1A (max)
DC Output 5V 1A (max)
Accessory 3-in-1 cable (Lightning/Type C/Micro), Manual