Mediclinics M23A User manual

Voltage
220 - 240 V
Frequency
50 / 60 Hz
Electrical insulation
Class II
I
Dimensions
160 x 220 x 77 mm
Weight
0.8 Kg
Air speed
60 Km/h
Total Power
200 - 1800 W
Consumption
0,9 - 7 A
rpm
9000 -18000 min
Air temperature
63 °C
Protection rating
IP20
Sound level (at 2 m)
65 dBA
Voltage
220 - 240 V
Frequency
50 / 60 Hz
Electrical insulation
Class II
I
Dimensions
160 x 220 x 77 mm
Weight
0.8 Kg
Air speed
60 Km/h
Total Power
200 - 1800 W
Consumption
0,9 - 7 A
rpm
9000 -18000 min
Air temperature
63 °C
Protection rating
IP20
Sound level (at 2 m)
65 dBA
Dimensions
185 x 165 x 95 mm
Weight
0.75 Kg
Capacity
1250
ml
Dispensed quantity/pulse
0.7 ml
Dimensions
185 x 165 x 95 mm
Weight
0.75 Kg
Capacity
1250
ml
Dispensed quantity/pulse
0.7 ml
Dimensions
185 x 165 x 95 mm
Weight
0.75 Kg
Capacity
1.250
ml
Dispensed quantity/pulse
0.7 ml
Dimensions
185 x 165 x 95 mm
Weight
0.75 Kg
Capacity
1250
ml
Dispensed quantity/pulse
0.7 ml
HAND DRYERS
SENSOR OPERATED
U-FLOW
General description
•The U-Flow is a fast, energy efficient, environmentally friendly,
hygienic & stylish hand dryer, suitable for high traffic facilities.
•“Hands-thru” model, it has one pair ofIR sensors on both upper
sides for instant hand detection.
•Maximum air speed 350 km/h.
•Dries hands in only 8 / 10 seconds.
•Adjustable motor power, allowing electricity consumption to be
regulated between 420 and 1,100W.
•HEPA filter media that filters the solid particles in suspension
(pollen, dustmites, tobaccosmoke, etc.)significantly improving
air quality, and with an anti-theft system as standard.
•It is delivered with an ionizer ("Ion Hygienic" technology) as
standard that purifies the air through negatively charged
particles (anions), eliminating many of the particles and germs
carried by the air, making it healthier and pure. These ions
inhibit the reproduction of micro-organisms in the product
throughout its lifetime.
•Plug-in system as standard that facilitates a safer, more
efficient and faster connection to the machine
•With Biocote® antimicrobial and antibacterial protection
technology based on silver ions.
•30 seconds safety timer.
•Lowest noise level in its category. (72.5-76.5 dBA).
•Easy maintenance, it can be connected directly to the main
waste pipe of the bathroom to eliminate waste water from hand
drying. Connection pipe as standard.
•Removable water tank with optional anti-theft system.
Components and materials
•COVER: made of high impact ABS.
•BASE PLATE: made of plastic PA6V0.
•MOTOR: high-speed class F universal brush motor, adjustable
from 19,000 to 30,000 rpm, allowing electricity consumption
and sound pressure to be regulated.
•HEATING ELEMENT: of 400W, made of a wavy wire and
mounted on a mica frame.
•HEPA FILTER MEDIA: cartridge that holds an HEPA filter
media that filters suspended solid particles (pollen, dust mites,
cigarette smoke, etc.), notably improving the air quality.
Furthermore, this cartridge also contains an activated carbon
filtering media that neutralises odours and absorbs smokes and
gases, helping avoid bad odours. It comes as standard.
•IONIZER: cleans and purifies the air through negative ions
(anions) which remove microscopic particles from the air
making it healthier. It comes as standard.
•CONNECTION TO THE WASTE PIPE: Included from the
factory with the hand dryer. It can be connected directly to the
waste pipe. Thus, there is no need to empty the water tank
because the water always goes directly to the waste pipe.
Technical Specifications
Voltage
220- 240 V
Frequency
50/60 Hz
Electrical Insulation
Class I
Total power
420 –1,500 W
Consumption
3,2 –6,4 A
Motor power
420 –1,100 W
Rpm
19,000 –30,000
Heating element power
400 W (with “ON/OFF”switch)
Dimensions
557x344x202 mm
Weight
7,1 Kg
Cover thickness
3 mm
Drying time
8-10 sec.
Air speed
252 –350 Km/h
Air temperature (10 cm
distance/21ºC)
40 ºC
Protection rating
IP23
Dimensions
Dimensions: + 4%
M23ACS
Satin finish
M23ABT
All black finish
M23AB
Black finish
M23A
White finish

•INNER TANK: collects the water. It is removable. Also, the U-flow can be connected directly to the waste pipe.
•AUTO-CHECK LIGHTING: for fast diagnosis of the dryer dryer (green –Stand by, yellow - machine running, blue - full
tank, red - check engine). Optical and acoustic full tank warning.
•ODOUR NEUTRALISER: for a cleaner and more pleasant atmosphere in the bathroom. (optional).
Operation
Place your hands between the air outlets, in the “U” area, near the IR sensors.
The dryer will start automatically and remain on with no interruption as long as your
hands are kept in the detection range of the sensor. Move your hands as
you like but always within the detection range of the sensors. The appliance
will stop 2 seconds after your hands are removed from the airflow.
Mounting Recommended heights distance from the floor

Connection to the waste pipe
The M23A hand dryer is designed for direct connection to the main water drain. Follow the steps below to
make the connection:
Remove the cover and connect the end of the drain pipe, which goes to the water tank, to the hole in the
base marked with an arrow in the figures. Close the cover.
Fit the hose supplied with the machine to the water drain at the rear of the machine. Mount the machine on
the wall keeping in mind that the hose mounted on the machine must enter the drain in the wall.
Certificates and Qualifications
Mediclinics, S.A., reserves the right to make changes and/or modifications to the products and their specifications without prior notice.
© mediclinics S.A. 161023