Medit i500 User manual

Troubleshooting guide for Medit i500
February 23rd, 2018
SQA of Medit Co., Ltd.

Contents
2
Chapter 3 Troubleshooting for installation
Chapter 4 Troubleshooting for connection fail
Chapter 5 Trouble shooting for using problem
Chapter 2 Check point
Chapter 1 Troubleshooting protocol

Troubleshooting protocol
Chapter 1
3
Trouble
Step 1 : Check point
(1) PC requirements
(2) Windows update
(3) USB selective suspend setting
Step 3 : Exchange the scanner
Step 2 : Troubleshooting for
(1) Installation
(2) Connection fail
(3) Misalignment

Check point
Chapter 2
PC requirements
4
Recommended specifications for Laptop
Operating System Microsoft Windows 10 64 Bit
(32 Bit –not available)
CPU Intel i7 7700 HQ or higher
RAM 16GB or higher
Graphic Card Nvidia GeForce GTX 1060 (3GB) or higher
Verified Laptop TBD(manufacturer & its model)
Operating System Microsoft Windows 10 64 Bit
(32 Bit –not available)
CPU Intel i7 7700 or higher
RAM 16GB or higher
Graphic Card Nvidia GeForce GTX 1060 (3GB) or higher
Verified Desktop TBD(manufacturer & its model)
* If console pc does not meet recommended requirement, i500 is working but scanning speed is slow.
Recommended specifications for desktop

Check point
Chapter 2
Windows updates should be done to the latest
one.
To make it sure, check for updates 2 ~ 3 times
further
This updates are related to connection fail
problem or some errors can occur when
customer uses the scanner
Please let customer always maintain their
windows updates to the latest one
5
Windows update

Check point
Chapter 2
6
High performance power plan is recommended
and we have to set “Disable” in USB selective
suspend setting
You can find the setting in the path below
> Control panel\ All control panel items\Power
options\Change plan settings\Change advanced
power settings
Do not use sleep mode on console pc
USB selective suspend setting

Troubleshooting for installation (1/2)
Chapter 3
7
Troubleshooting
1. Change username of console pc without any space or
double-byte character
2. If it doesn’t work properly, follow the process below
Symptom
1. Error message occurs during software installation
(1) Run “cmd.exe” as administrator
(3) Input command “Sfc /scannow” and enter
(4) After verification 100% complete, restart PC
(5) Re-install Medit iScan

Troubleshooting for installation (2/2)
Chapter 3
8
Symptom
Troubleshooting
1. Check windows update at first
2. If it doesn’t work properly, follow the process below
(1) Connect installation USB
(2) Find the path “Utility\vcRedist”
(3) Run files in each folder, select install or repair
(4) Run Medit iScan
(5) Re-install the software if it doesn’t work properly
1. Error message occurs when launching Medit iScan

Troubleshooting for connection fail (1/4)
Chapter 4
9
Symptom
1. Error message occurs when launching Medit iScan
2. Sudden shut down of scanner
3. Can not turn on scanner
Troubleshooting
1. Check all connection of Medit i500
2. Change USB port
3. Change USB cable
4. Exchange Medit i500
Medical adapter & power cable USB 3.0 cable

Troubleshooting for connection fail (2/4)
Chapter 4
10
Symptom
1. Error message occurs when launching Medit iScan
2. Exclamation mark on cameras

Troubleshooting for connection fail (3/4)
Chapter 4
11
Troubleshooting
1. Please uninstall and re-install camera drivers
manually by following the process
(1) Open device manager
(2) Click right button on camera driver
(3) Select Update driver
(4) Click browse to find the “Camera” folder
(5) Click next to update camera drivers
(6) Reboot the scanner
2. Try re-installation of software
3. Exchange Medit i500

Troubleshooting for connection fail (4/4)
Chapter 4
12
Symptom
1. Error message occurs when launching Medit iScan
Troubleshooting
1. Please connect the scanner to USB 3.0 port only
i500 will not work properly with USB 2.0 port
2. Exchange Medit i500

Troubleshooting for Misalignment (1/3)
Chapter 5
13
Symptom
1. Misalignment of scan data (Single arch)
Scan button of i500
Scan stages of Medit iScan
Misalignment
Result
Troubleshooting
1. Check scan-guide and follow specification
(1) In case of fast scanning
(2) Incontinous scanning
2. Automatic alignment with using iScan
(1) Press the scan button of i500
(2) Click another stage in Medit iScan
(3) Return to previous stage and continue
3. Delete previous scan data and re-scan

Chapter 5
14
Symptom
1. Misalignment of scan data (Occlusion)
Troubleshooting
1. Follow process below Misalignment Delete button
Delete occlusion data
Re-scan result
(1) Delete occlusion scan data
(2) Re-scan occlusion
Troubleshooting for Misalignment (2/3)

Chapter 5
15
Symptom
1. Misalignment of scan data (Occlusion)
Troubleshooting
1. Follow process below
(1) Click ‘Move Maxilla’ and ‘Move Mandible’
Misalignment
Align result
Move Maxilla and Move Mandible
Align Manually
(2) Click ‘Align Manual” in Medit iScan
(3) Align occlusion manually by clicking
one point on the model
Troubleshooting for Misalignment (3/3)

www.meditcompany.com
[e-mail]
https://www.facebook.com/meditco