MEFE CAT 6632D User manual

MEFE—Mitchell Engineering Food Equipment Pty Ltd
23 - 25 Storie Street, Clontarf, QLD, 4019, Australia
www.mefe.com.au
Page 1
[phone]
[email protected]
Operating Manual
Electric Crepe Maker
CAT 6632D
Revision 1

MEFE—Mitchell Engineering Food Equipment Pty Ltd
23 - 25 Storie Street, Clontarf, QLD, 4019, Australia
www.mefe.com.au
Page 2
[phone]
[email protected]
The MEFE Crape Maker boasts an appealing design, innovave structure, compact size, lightweight build, user-friendly opera-
on, rapid heang, and even heat distribuon. Addionally, it is constructed using stainless steel material, and the product
features a warming cupboard at the base.
Safety Cauons:
1. Voltage Compability: The device should be connected to a power source with the same rated voltage. This ensures
that the device operates safely and eciently within its specied voltage range.
2. Locaon near Power Switch and Fuse: Users should install the device near the power switch and fuse. This makes it
convenient to control the power supply to the device and provides protecon through the fuse in case of electrical
faults.
3. Grounding Requirements: The equipment should have an equal potenal grounding bolt. This grounding should be
connected using a copper wire with a minimum diameter of 2.5mm². This grounding is important for safety, as it helps
dissipate electrical faults and prevents electric shock hazards.
4. Safety Checks: Users should regularly check for loose copper wiring, ensure the correct voltage is being supplied, and
verify that the ground connecon is secure. These checks are essenal for maintaining the device's safe and reliable
operaon.
5. Machine Shell Grounding: Grounding of the machine's shell is necessary to ensure safety. This helps prevent electrical
shock hazards and protects both users and the equipment.
Specicaons:
Usage Condions: The ambient temperature should not exceed 50°C.
Installaon & Operang Instrucons:
When installing or repairing this equipment, ensure that a person with an electrician operaon permit is handling the task.
Ensure the power-line voltage matches the specied power supply voltage indicated on the equipment's nameplate. Avoid
placing any explosive materials near the product to prevent re hazards.
Operaon Guidelines:
 Aer connecng to the power supply, set the temperature to your desired level.
 Once the temperature reaches the set level, the heang element will stop heang.
 If the temperature drops slightly, the temperature controller will automacally reconnect the power to the heang
element, ensuring consistent heang.
 This allows you to maintain a controlled temperature range as per your sengs on the temperature dial.
Model Supply Voltage Frequency Power Dimensions (L x W x H) Weight
CAT 6632D 220-240V 50-60Hz 3kW 450 x 470 x 230mm 23kg

MEFE—Mitchell Engineering Food Equipment Pty Ltd
23 - 25 Storie Street, Clontarf, QLD, 4019, Australia
www.mefe.com.au
Page 3
[phone]
[email protected]
Circuit Diagram
D1 - Power Light
R - Heang Tube
WK2 - Temperature Controller
Transportaon and Storage:
When transporng the products, handle them with care to avoid excessive vibraons. It's important to place them gently to
prevent any damage during transit. Products should not be stored in open spaces for extended periods when wrapped. Store
them in a well-venlated warehouse free from corrosive gases. Avoid inverng the products during temporary storage and
take water-resistant measures.
Cleaning and Maintenance:
Always disconnect the power before cleaning and performing maintenance to prevent accidents.
Aer each use, clean the stove's surface and the extended wire with a damp cloth, using a non-corrosive cleanser.
Cauon: Do not use a spray pipe for cleaning to prevent damage to its electric funcon and potenal safety hazards.