MeiTrack T322 User manual

File Name:
MEITRACK T322 User Guide
Creator:
Project:
T322
Creation Date:
Update Date:
2013-07-01
2013-09-17
Sub Project:
User Guide
Page:
1 of 21
Revision:
V1.2
Confidential:
External Documentation
MEITRACK® GPS Vehicle Tracker
T322
User Guide
Copyright © 2013 Meitrack Group All rights reserved.
1
All manuals and user guides at all-guides.com
all-guides.com

File Name:
MEITRACK T322 User Guide
Creator:
Project:
T322
Creation Date:
Update Date:
2013-07-01
2013-09-17
Sub Project:
User Guide
Page:
2 of 21
Revision:
V1.2
Confidential:
External Documentation
Content
1. Copyright and Disclaimer.................................................................................................................................. 3
2. Applications ...................................................................................................................................................... 3
3. Product Function and Specifications................................................................................................................. 3
3.1 Product Function.......................................................................................................................................... 3
3.2 Specifications ............................................................................................................................................... 4
4. T322 and Accessories........................................................................................................................................ 5
5. View.................................................................................................................................................................. 6
6. First Use ............................................................................................................................................................ 7
6.1 Install SIM Card ............................................................................................................................................ 7
6.2 LED Indications............................................................................................................................................. 8
6.3 Configure by Computer ................................................................................................................................ 8
6.3.1 GPRS/SMS Tracking ......................................................................................................................... 10
6.3.2 Geo-fence Configuration ................................................................................................................. 11
6.3.3 Authorized Event Configuration ...................................................................................................... 12
6.4 GPS Tracking............................................................................................................................................... 13
6.4.1 Real-time Tracking by Mobile Phone............................................................................................... 13
6.4.2 Set Function Phone Numbers.......................................................................................................... 14
6.4.3 Arming/Disarming ........................................................................................................................... 15
6.5 Advanced Settings ...................................................................................................................................... 16
6.5.1 Definition of key on RF Wireless Remote Control ........................................................................... 16
6.6 GPS Tracking System................................................................................................................................... 16
7. Installation ........................................................................................................................................................... 18
7.1 Connect GPS Antenna (Optional) ............................................................................................................... 18
7.2 Install I/O Cable.......................................................................................................................................... 18
7.2.1 The Definition of I/O Cable.............................................................................................................. 18
7.2.2 I/O Photos ....................................................................................................................................... 19
7.2.3 Power Cable/Ground W ire .............................................................................................................. 19
7.2.4 ACC and Door Detection.................................................................................................................. 20
7.2.5 Remote Control Stop Engine ........................................................................................................... 20
7.2.6 Buzzer Alarm (Optional) .................................................................................................................. 20
7.2.7 Remote Control Box (Optional) ....................................................................................................... 21
7.2.8 Port of Microphone and Speaker (Optional) ................................................................................... 21
7.3 Mount the T322 Unit.................................................................................................................................. 21
Copyright © 2013 Meitrack Group All rights reserved.
2
All manuals and user guides at all-guides.com

File Name:
MEITRACK T322 User Guide
Creator:
Project:
T322
Creation Date:
Update Date:
2013-07-01
2013-09-17
Sub Project:
User Guide
Page:
3 of 21
Revision:
V1.2
Confidential:
External Documentation
1. Copyright and Disclaimer
Copyright © 2013 MEITRACK. All rights reserve
MEITRACK and are trademarks that belong to Meitrack Group.
The user manual may be changed without prior notification.
This user manual, or any part thereof, may not be reproduced for any purpose whatsoever without the written
authorization of MEITRACK, or transmitted in any form, either electronically or mechanically, including
photocopying and recording.
In no event shall MEITRACK be liable for direct, indirect, special, incidental, or consequential damages (including
but not limited to economic loss, personal injury, and loss of asset and property) arising out of the use or inability
or illegality to use the product or documentation.
2. Applications
Private Car Tracking and Security
Official Car Tracking and Security
Personal Tracking
3. Product Function and Specifications
3.1 Product Function
U-blox 7 GPS and Quad Band GSM 850/900/1800/1900Mhz
GPS + GSM Dual Module Tracking
SMS/TCP/UDP (MEITRACK Protocol)
Track by Time/ Distance Interval
Track on Mobile Phone
Listen-in or Two-way Audio (Optional)
Internal Flash Memory (1M)
Inbuilt Motion Sensor
Internal Backup Battery 350mAh
Long Stand-by Time
SOS Alarm
Geo-fence Alarm
GPS Blind Area Alarm
Low Battery Alarm
Speeding Alarm
Tow Alarm
GPS Antenna/ External Power Cut Alarm
Mileage Report
Engine Cut (Engine immobilization) Alarm
3 Digital Input(1 Negative,1 Positive and 1 can be set through software),2 Output
1 Analog Input for Fuel Detection (Optional)
Copyright © 2013 Meitrack Group All rights reserved.
3
All manuals and user guides at all-guides.com

File Name:
MEITRACK T322 User Guide
Creator:
Project:
T322
Creation Date:
Update Date:
2013-07-01
2013-09-17
Sub Project:
User Guide
Page:
4 of 21
Revision:
V1.2
Confidential:
External Documentation
1 Output for Buzzer Alarm (Optional)
Wireless Remote Control (Arming, Disarming) (Optional)
Address Reply(Optional)
3.2 Specifications
Items Specifications
Dimension 70.5*54*19.5mm
Weight 220g
Input Voltage DC 9V~36V/1.5A
Back-up Battery 350mAh/3.7V
Normal Working
Power Consumption (12V)
45mA normal working current (12V ACC ON, 10sec interval for data transmission, average
current)
Standby Power
Consumption (12V)
6.5mA (12V ACC OFF, no data transmission, average current)
Battery Normal Working
Power Consumption
90mA (3.8V, GPS module OFF, 10sec interval for data transmission, average current)
Battery Standby Power
Consumption
7mA (3.8V, GPS module OFF, no data transmission, average current)
Operating Temperature -20℃~80℃
Humidity 5%~95%
Work Time 50 hours in power-saving mode and 3.5 hours in normal working mode
LED 3 LED lights to show GPS/GSM/Power status
Button 1 SOS (send SMS or Call), 1 power button, 1 positive or negative trigger switch by the door
Microphone/Speaker External (Optional)
Memory 1M Byte
Sensor Motion sensor
GSM Frequency GSM 850/900/1800/1900MHz
GPS Chip Latest GPS U-blox 7 chipset, 50 channels all-in-view tracking
GPS Sensitivity -161dB
Positioning Accuracy 10 meters
GSM Antenna Internal Antenna
GPS Antenna Internal / external connection MMCX antenna (Optional)
I/O 3 Digital Input(1 SOS, 1 Door Trigger input (can be set to be negative or positive ), 1 ACC
Detection)
2 Output(1 for Buzzer Alarm,1 for Remote Engine Cut)
1 Analog Input
1 RS232 Interface(can charge battery)
1Wireless Remote Control (433Mhz)(Optional)
Copyright © 2013 Meitrack Group All rights reserved.
4
All manuals and user guides at all-guides.com

File Name:
MEITRACK T322 User Guide
Creator:
Project:
T322
Creation Date:
Update Date:
2013-07-01
2013-09-17
Sub Project:
User Guide
Page:
5 of 21
Revision:
V1.2
Confidential:
External Documentation
4. T322 and Accessories
T322 with Battery I/O Cable SOS Button USB Data Cable
CD
Optional Accessories:
Wireless
Remote Control
Buzzer Alarm Microphone Speaker
Fuel Sensor GPS Antenna Remote Control Box Audio Cable for
Microphone and
Speaker
Map Card
Copyright © 2013 Meitrack Group All rights reserved.
5
All manuals and user guides at all-guides.com

File Name:
MEITRACK T322 User Guide
Creator:
Project:
T322
Creation Date:
Update Date:
2013-07-01
2013-09-17
Sub Project:
User Guide
Page:
6 of 21
Revision:
V1.2
Confidential:
External Documentation
5. View
Microphone & Speaker Interface
GPS Antenna Interface
Power & Functional Cables
Power/GSM/GPS LED USB Interface
Copyright © 2013 Meitrack Group All rights reserved.
6
All manuals and user guides at all-guides.com
all-guides.com

File Name:
MEITRACK T322 User Guide
Creator:
Project:
T322
Creation Date:
Update Date:
2013-07-01
2013-09-17
Sub Project:
User Guide
Page:
7 of 21
Revision:
V1.2
Confidential:
External Documentation
6. First Use
6.1 Install SIM Card
Remove cover of SIM, insert the SIM card by sliding it into the card holder with the chip module facing to the
connectors on PCB, put the cover in place.
Notice:
Make sure SIM card has sufficient balance.
If the device is required to reply SMS to authorized number after being called, please
make sure it has the function of displaying incoming Caller ID.
Before installing the SIM card, turn the power off.
Make sure the SIM card is unlocked.
Power On/Off
SIM Card Slot & Input 3 High/Low Level Detection On/Off
SIM Card
Copyright © 2013 Meitrack Group All rights reserved.
7
All manuals and user guides at all-guides.com

File Name:
MEITRACK T322 User Guide
Creator:
Project:
T322
Creation Date:
Update Date:
2013-07-01
2013-09-17
Sub Project:
User Guide
Page:
8 of 21
Revision:
V1.2
Confidential:
External Documentation
6.2 LED Indications
There are three ways to turn ON the tracker, press and hold the power button for 3-5 seconds, or connect tracker
by USB cable to a computer, or connect it with external power.
GPS LED (Blue)
On GPS Antenna malfunctions
Off GPS is off.
Quick Flashing (0.5 second on and 2.5 seconds off) T322 has a GPS fix
Slow Flashing (1 second on and 2 seconds off) T322 has no GPS fix
GSM LED (Green)
On A call is coming in / a call is being made
Off SIM card is not inserted / SIM card malfunctions
Quick Flashing (0.5 second on and 2.5 seconds off) T322 is connected to GSM network
Slow Flashing (1 second on and 2 seconds off) T322 is not connected to GSM network
Power (Red)
On Charging
Quick Flashing (0.5 second on and 2.5 seconds off) Low battery
Slow Flashing (1 second on and 2 seconds off) Normal working
6.3 Configure by Computer
The following shows you how to configure the T322 with MEITRACK Manager. Please install USB Driver and
MEITRACK Manager in advance.
Please refer to the MEITRACK Manager User Guide for details on configurations and functions.
Connect T322 to PC with USB cable.
GSM LED (Green)
GPS LED (Blue)
Power (Red)
Copyright © 2013 Meitrack Group All rights reserved.
8
All manuals and user guides at all-guides.com

File Name:
MEITRACK T322 User Guide
Creator:
Project:
T322
Creation Date:
Update Date:
2013-07-01
2013-09-17
Sub Project:
User Guide
Page:
9 of 21
Revision:
V1.2
Confidential:
External Documentation
Run Device Manager (right-click “My Computer” –“Manage” –“Computer Management”- “Device Manager ” )
Click “Port(COM and LPT)”, and find “Prolific USB-to-Serial Comm Port” as below:
Run MEITRACK Manager, turn ON the device and connect to PC with USB cable, Meitrack Manager will
automatically detect port and model, and enter into the main interface as follows:
Copyright © 2013 Meitrack Group All rights reserved.
9
All manuals and user guides at all-guides.com

File Name:
MEITRACK T322 User Guide
Creator:
Project:
T322
Creation Date:
Update Date:
2013-07-01
2013-09-17
Sub Project:
User Guide
Page:
10 of 21
Revision:
V1.2
Confidential:
External Documentation
Note: Please following the steps to confirgure the port if MM can’t automatically detect the port.
Run Device Manager (right-click “My Computer” –“Manage” –“Computer Management”- “Device Manager ” )
Click “Port(COM and LPT)”, and find “Prolific USB-to-Serial Comm Port” as below:
Note: Remember the COM number. And input the same port when configure Meitrack Manager.
It is COM3 in this example and it might be COM4 or COM5… in your computer.
6.3.1 GPRS/SMS Tracking
Select Column 2: Tracking
Copyright © 2013 Meitrack Group All rights reserved.
10
All manuals and user guides at all-guides.com

File Name:
MEITRACK T322 User Guide
Creator:
Project:
T322
Creation Date:
Update Date:
2013-07-01
2013-09-17
Sub Project:
User Guide
Page:
11 of 21
Revision:
V1.2
Confidential:
External Documentation
GPRS Tracking
Item Description
GPRS Close: Close GPRS
TCP: TCP is a stable connection. It is recommended (Default).
UDP: UDP can save data flow, while it is unstable.
IP/Domain and Port Set main server’s IP and port.
Default IP: 67.203.13.26
Default Port : 8800
APN, APN Username,
APN Password
Max 32 bytes. If no username and password, leave them blank.
GPRS Time Interval Track by time interval via GPRS
Set time interval for GPRS tracking, in unit of 10 seconds (fill in 6 means 60 seconds).
To cancel GPRS tracking, time interval = 0; max time interval = 65535*10 seconds.
Default setting of GPRS interval time is 6*10s.
GPRS Time Zone GPRS time zone minute = 0, GMT 0 (Default)
GPRS time zone minute = [-32768,32767], set different time zones.
Save Write current GPRS Tracking settings into the tracker.
For more details, please refer to Meitrack Manager User Guide.
6.3.2 Geo-fence Configuration
Select Column 3: Geo Fence
Copyright © 2013 Meitrack Group All rights reserved.
11
All manuals and user guides at all-guides.com
all-guides.com

File Name:
MEITRACK T322 User Guide
Creator:
Project:
T322
Creation Date:
Update Date:
2013-07-01
2013-09-17
Sub Project:
User Guide
Page:
12 of 21
Revision:
V1.2
Confidential:
External Documentation
Geo-fence: it is a circular fence which is based on a center point with preset radius. Maximum 8 geo-fence.
Enter Geo-fence: alarm while the device entering geo-fence, the left textbox will show corresponding SMS Header,
default as “In Alarm”.
Exit Geo-fence: alarm while the device exiting geo-fence, the left textbox will show corresponding SMS Header,
default as “Out Alarm”.
Map: click “In Map” to make and define geo-fence.
6.3.3 Authorized Event Configuration
Select Column 3: Authorize.
Set GPRS Event and Buzzer Alarm, and they can be set separately.
For more GPRS Settings, please refer to MEITRACK SMS Protocol and MEITRACK GPRS Protocol for details.
Copyright © 2013 Meitrack Group All rights reserved.
12
All manuals and user guides at all-guides.com

File Name:
MEITRACK T322 User Guide
Creator:
Project:
T322
Creation Date:
Update Date:
2013-07-01
2013-09-17
Sub Project:
User Guide
Page:
13 of 21
Revision:
V1.2
Confidential:
External Documentation
6.4 GPS Tracking
6.4.1 Real-time Tracking by Mobile Phone
Make a call to T322 and it will reply with one SMS.
Click on the link, and show the location on Google Maps on your mobile phone.(Please make sure Caller ID is not
block. Otherwise, this function will not work.)
Report description:
Now,110727 02:48,V,16,23Km/h,61%,http://maps.google.com/maps?f=q&hl=en&q=22.540103,114.082329
&ie=UTF8&z=16&iwloc=addr&om=1
Content Description Note
Now Current Location Alarm Type
110721 16:40 Date & Time: 21 July, 2011, 16:40pm Date & Time in YYMMDD HH:MM
V No GPS fixed GPS Status Indicator:
A = valid, V = invalid
10 GSM signal=10 GSM Signal. Decimal Digit (0~31)
0Km/h Speed=0 KM/h. Decimal digit
97% Battery Power: 97% Battery Power Balance (Percentage)
http://maps.google.c
om/maps?f=q&hl=en
&q=22.540103,114.0
82329&ie=UTF8&z=
16&iwloc=addr&om=
1
Latitude: 22.513015
Longitude: 114.057235
Google Maps Web Link with Latitude and
Longitude. Click on the link to get the
location.
If your mobile cannot visit HTTP websites, input the latitude and longitude into Google Maps
http://maps.meigps.com/ as the following picture, to show to the position:
Copyright © 2013 Meitrack Group All rights reserved.
13
All manuals and user guides at all-guides.com

File Name:
MEITRACK T322 User Guide
Creator:
Project:
T322
Creation Date:
Update Date:
2013-07-01
2013-09-17
Sub Project:
User Guide
Page:
14 of 21
Revision:
V1.2
Confidential:
External Documentation
More SMS Commands
You can configure T322 by mobile phone or by computer using the MEITRACK Manager. Please refer to the
following text.
Note:
1. The default password is 0000, it can be modified through SMS command (Refer to below text) or Meitrack
Manager on computer (Refer to 6.3 Configure by Computer).
2. T322 can be configured by any mobile SMS command with correct password. After authorization phone
number is set, only authorized number can receive SMS report.
6.4.2 Set Function Phone Numbers
Command: 0000, A71,function phone number 1, function phone number 2, function phone number 3
SMS Get: IMEI, A71, OK
Note:
Function Phone Number: Max 16 characters. It is blank by default
First Function Phone Number: Authorize for receiving call and SMS notification from SOS Alarm, Calling for
Real-time Location, Geo-fence Alarm, Low Battery Alarm, Opening the Vehicle’s Door or Starting engine without
permission.
“0000, A71” to delete all Function Phone Numbers.
When SOS button is pressed, T322 will make a call to the function phone number 1, 2 and 3. It will stop calling
when one number answers.
Example: 0000,A71,13811111111,13822222222,13833333333
SMS Get: 353358017784062,A71,OK
Copyright © 2013 Meitrack Group All rights reserved.
14
All manuals and user guides at all-guides.com

File Name:
MEITRACK T322 User Guide
Creator:
Project:
T322
Creation Date:
Update Date:
2013-07-01
2013-09-17
Sub Project:
User Guide
Page:
15 of 21
Revision:
V1.2
Confidential:
External Documentation
6.4.3 Arming/Disarming
There are four ways to set Arming: Wireless Remote control (Optional), SMS Command, Make a Phone Call, or
Platform Command.
Suggestion: Using optional accessories Wireless Remote Control and Buzzer Alarm to strengthen protection, and
set the Function Phone Number to make sure it can receive the call and SMS Report while stolen.
Wireless Remote Control: Press the Lock key to Arm. If buzzer alarm is connected, it will “BI” once to
confirm the Arming is successful. If buzzer is not connected, open the vehicle’s door to see whether a SMS
alert and a call is sent to the function phone number. Press Unlock to Disarm.
SMS Command: To Arm and Disarm by SMS Command.
Command: 0000, B21, Status
SMS Get: IMEI, B21, OK
Note:
Status=1 Arming. In Arming status, if open vehicle door or start ACC on, T322 will make call and send SMS
report to the function phone number.
Status=0 Disarming. In Disarming status, all security alarms will be OFF.
Function Call SMS Engine Cut Buzzer Note
Open the
Vehicle’s Door
√√√
While open the vehicle’s door without permission, the
buzzer will keep sounding until disarm, then T322 will
make call in turns and send SMS report to the function
phone numbers.
Start the vehicle √√√√
While start the vehicle, the engine will be cut to avoid
stolen, buzzer will keep sounding until disarm, then T322
will make call in turns and send SMS report to the
function phone numbers.
Set Arming
while Driving
(Intercept the
Driving Vehicle )
√√
After the vehicle is stolen, it can be stopped with
GPRS/SMS command. Set arming while driving, when the
vehicle speed is lower than 5km/h, the engine will be cut.
Then T322 will send SMS alert to function phone
numbers.
Tow Alarm √√
On ACC off status, the tow alarm will be trigger if the
vehicle keeps vibrating. Then T322 will make call in turns
and send SMS report to the function phone numbers.
Please refer to the MEITRACK SMS Protocol for more detailed SMS command.
Copyright © 2013 Meitrack Group All rights reserved.
15
All manuals and user guides at all-guides.com

File Name:
MEITRACK T322 User Guide
Creator:
Project:
T322
Creation Date:
Update Date:
2013-07-01
2013-09-17
Sub Project:
User Guide
Page:
16 of 21
Revision:
V1.2
Confidential:
External Documentation
6.5 Advanced Settings
6.5.1 Definition of key on RF Wireless Remote Control
1) Key-1: Short press to arm, the buzzer will “BI” once.
2) Key-2: Short press to disarm, the buzzer will “BI” twice.
Note: For more details on Arming Status, please refer to 6.4.3 Arming/Disarming.
6.6 GPS Tracking System
Steps:
Configure Parameters -Log in Meitrack Family GPS Tracking System MS02 ((visit www.trackingmate.com and
select MS02, or directly visit ms02.trackingmate.com) - Add Devices
1. There are 2 methods to configure:
Configure by SMS: Send SMS command (0000,A21,1,67.203.13.26,8800,APN,APNusername,APNpassword)and
(0000,A12,6,0) to T322.
Configure by Meitrack Manager: connect with computer, run Meitrack Manager.exe, enter the main interface and
select column 2 Tracking, turn on TCP and set IP, Port, APN, GPRS Time Interval.
2. Visit and log in ms02.meiligao.com (Please contact us if lose your account and password)
3. Enter the map and click Manage -Admin
Copyright © 2013 Meitrack Group All rights reserved.
16
All manuals and user guides at all-guides.com
all-guides.com

File Name:
MEITRACK T322 User Guide
Creator:
Project:
T322
Creation Date:
Update Date:
2013-07-01
2013-09-17
Sub Project:
User Guide
Page:
17 of 21
Revision:
V1.2
Confidential:
External Documentation
4. Select Users and Add a New Device.
5. Get IMEI from serial port and register via IMEI (The IMEI is 356896031494173 for example)
6. Double click the Control Panel on the right of the main interface to check if the data on the bottom is updated.
Copyright © 2013 Meitrack Group All rights reserved.
17
All manuals and user guides at all-guides.com

File Name:
MEITRACK T322 User Guide
Creator:
Project:
T322
Creation Date:
Update Date:
2013-07-01
2013-09-17
Sub Project:
User Guide
Page:
18 of 21
Revision:
V1.2
Confidential:
External Documentation
7. Installation
7.1 Connect GPS Antenna (Optional)
GPS Antenna Interface GPS Antenna
If the tracker is installed inside the vehicle, with weak GPS signal, it can connect optional external GPS antenna to
strengthen the signal.
The optimum location for the GPS antenna is on the roof of vehicle. The cover and GPS antenna are directional.
Make sure they are facing up and lying as flat as possible. Fix them in place with glue or zip ties.
Note: Do not shield or cover the GPS antenna with any objects containing metal.
7.2 Install I/O Cable
7.2.1 The Definition of I/O Cable
The I/O cable includes power cable, analog input, negative/positive input and output.
1
SOS GND
(Black)
3
SOS
(White)
5
Output 1
(Yellow)
7
Output 2
(Orange)
9
Input 2
(Brown)
11
Input 3
(Grey)
2
Device Input
Power
(Red)
4
Device GND
(Black)
6
Remote
Control GND
(Black)
8
Remote Control
Power (Yellow)
10
Remote
Control signal
wire (Green)
12
Analog Input
(Blue)
No. I/O Description
1 SOS GND GND, used for input1 triggering.
Copyright © 2013 Meitrack Group All rights reserved.
18
All manuals and user guides at all-guides.com

File Name:
MEITRACK T322 User Guide
Creator:
Project:
T322
Creation Date:
Update Date:
2013-07-01
2013-09-17
Sub Project:
User Guide
Page:
19 of 21
Revision:
V1.2
Confidential:
External Documentation
2 Device Input Power DC 11V~36V, has under voltage and over voltage protection
3 Input 1 (SOS) Negative trigger: Alarm when input 1 active (or press SOS)
4 Device GND GND, connect to negative electrode of the car battery
5 Output 1 (Fuel Cut) Output OD, power 1W, 0~100V
Connect with relay for engine/fuel cut (default)
6 Remote Control GND Connect with the black wire of remote control box
7 Output 2 (Buzzer Alarm) Connect with the negative electrode of the buzzer alarm
8 Remote Control Power 4.2V, Connect with the Red wire of remote control box
9 Input 2 (ACC Input) Positive trigger: High level voltage input(3~60V), default as ACC
detection
10 Remote Control signal
wire (Input 4)
Connect with the blue wire of remote control box
11 Input 3 (Door Trigger) Configurable of positive or negative trigger (default is negative
trigger), controlled by switch (beside SIM card slot). Default as
door detection.
12 Analog Input AD 0~47V. Connect with sensor.
7.2.2 I/O Photos
Digital Input 1(SOS) Interface Remote Control Interface
7.2.3 Power Cable/Ground Wire
Connect GND (-Black) and Power (+Red) wires to the battery of vehicle.
Copyright © 2013 Meitrack Group All rights reserved.
19
All manuals and user guides at all-guides.com

File Name:
MEITRACK T322 User Guide
Creator:
Project:
T322
Creation Date:
Update Date:
2013-07-01
2013-09-17
Sub Project:
User Guide
Page:
20 of 21
Revision:
V1.2
Confidential:
External Documentation
7.2.4 ACC and Door Detection
7.2.5 Remote Control Stop Engine
7.2.6 Buzzer Alarm (Optional)
Buzzer Output
Copyright © 2013 Meitrack Group All rights reserved.
20
All manuals and user guides at all-guides.com