MeiTrack iButton MVT600 User manual

File Name:
MEITRACK MVT600 User Guide
Creator:
Cavana Cheung
Project:
MVT600
Creation Date:
Update Date:
2010-09-13
2011-08-01
Sub Project:
User Guide
Page:
1 of 22
Revision:
V2.0
Confidential:
External Documentation
Copyright © 2010 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
MEITRACK® MVT600
User Guide

File Name:
MEITRACK MVT600 User Guide
Creator:
Cavana Cheung
Project:
MVT600
Creation Date:
Update Date:
2010-09-13
2011-08-01
Sub Project:
User Guide
Page:
2 of 22
Revision:
V2.0
Confidential:
External Documentation
Copyright © 2010 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
Contents
1. Copyright and Disclaimer ....................................................................................3
2. Applications.......................................................................................................3
3. Product Function and Specifications......................................................................3
3.1 Product Function ..........................................................................................3
3.2 Specifications................................................................................................4
4. MVT600 and Accessories .....................................................................................5
5. View.................................................................................................................5
6. First Use ...........................................................................................................6
6.1 Install SIM Card ............................................................................................6
6.2 Charging ......................................................................................................6
6.3 LED Indications .............................................................................................6
6.4 Track by Calling.............................................................................................7
6.4.1 Multiple Phone numbers–A71.................................................................8
6.4.2 Listening-in (Voice Monitoring)–A72 ........................................................8
6.4.3 Sleep Mode –A73 .................................................................................9
6.4.4 Geo-fence Alarm –B05..........................................................................9
6.4.5 Time Zone–B35 ................................................................................. 10
6.5 Configure by Computer ................................................................................ 10
6.5.1 SMS Tracking...................................................................................... 11
6.5.2 GPRS Tracking ....................................................................................15
7. Installation...................................................................................................... 17
7.1 Install I/O Cable.......................................................................................... 17
Power/GND (PIN1/PIN2) .............................................................................. 18
7.1.2 Digital Input (PIN4/5, negative triggering) ............................................. 18
7.1.3 Digital Input (PIN3, positive triggering) .................................................18
7.1.4 Output............................................................................................... 19
7.1.5 Analog Input ...................................................................................... 19
7.1.6 Install Handset Phone (RS232 Interface)................................................20
7.1.7 Install Camera (RS232 Interface)..........................................................20
7.1.8 Install Micro SD .................................................................................. 21
7.1.9 Install RFID Reader (Wiegand Interface) ................................................ 21
7.2 Install GPS/GSM Antennas............................................................................ 21
7.3 Mount the MVT600 unit ................................................................................22

File Name:
MEITRACK MVT600 User Guide
Creator:
Cavana Cheung
Project:
MVT600
Creation Date:
Update Date:
2010-09-13
2011-08-01
Sub Project:
User Guide
Page:
3 of 22
Revision:
V2.0
Confidential:
External Documentation
Copyright © 2010 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
1. Copyright and Disclaimer
Copyright © 2010 MEITRACK. All rights reserve
MEITRACK and are trademarks that belong to Shenzhen Meiligao Electronics Co., Ltd.
.
The user manual may be changed without prior notification.
This user manual, or any part thereof, may not be reproduced for any purpose whatsoever without the written
authorization of Meiligao (MEITRACK), or transmitted in any form, either electronically or mechanically, including
photocopying and recording.
In no event shall Meiligao (MEITRACK) be liable for direct, indirect, special, incidental, or consequential damages
(including but not limited to economic loss, personal injury, and loss of asset and property) arising out of the use
or inability or illegality to use the product or documentation.
2. Applications
Vehicle Real Time Tracking
Car Security/Anti-Hijack
Fleet Management
3. Product Function and Specifications
3.1 Product Function
SiRF III GPS and Quad Band GSM 850/900/1800/1900Mhz
AGPS ( with GSM Base Station ID)
Track by SMS/GPRS (MEITRACK Protocol)
Track on Demand
Track by Time Interval
Track by Distance Interval
Track on Mobile Phone
Listen-in or Two-way Audio (Optional)
Internal Flash Memory (4M)
Inbuilt Accelerating Sensor
Inbuilt Motion Sensor
Internal Backup Battery
SOS Alarm
Geo-fence Alarm
GPS Blind Area Alarm
Low Battery Alarm
Speeding Alarm

File Name:
MEITRACK MVT600 User Guide
Creator:
Cavana Cheung
Project:
MVT600
Creation Date:
Update Date:
2010-09-13
2011-08-01
Sub Project:
User Guide
Page:
4 of 22
Revision:
V2.0
Confidential:
External Documentation
Copyright © 2010 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
Impact Alarm
Tow Alarm
GPS Antenna Cut Alarm
External Power Cut Alarm
Mileage Report
Engine Cut (Engine immobilization)
Inbuilt Super Magnet (optional)
Handset Phone (optional)
Camera (optional)
Micro SD Card Memory for Storing Pictures (Optional)
RFID Reader (optional)
LED Display (optional)
LCD Display (optional)
3 Digital Inputs
3 Outputs
3 Analog Input Detection
3.2 Specifications
Items
Specifications
Dimension
103*98*32mm
Weight
220g
Charging Voltage
DC 9V~36V/1.5mA
Back-up Battery
850mAh/3.7V
Power
consumption
85mA standby current
Operating
Temperature
-20℃~55℃
Humidity
5%~95%
Work Time
36 hours in power-saving mode and 8 hours in normal mode
LED
2 LED lights to show GPS, GSM and other status
Button
1 SOS and 1 power on/off
Microphone
Optional
Memory
4M Byte
Sensor
Motion sensor & Impact sensor
GSM Frequency
GSM 850/900/1800/1900MHz
GPS Chip
Latest GPS SIRF-Star III chipset
GPS Sensitivity
-159dB
Positioning
Accuracy
10 meters, 2D RMS
I/O
5 Digital Input ( 1 positive triggering and 2 negative triggering)

File Name:
MEITRACK MVT600 User Guide
Creator:
Cavana Cheung
Project:
MVT600
Creation Date:
Update Date:
2010-09-13
2011-08-01
Sub Project:
User Guide
Page:
5 of 22
Revision:
V2.0
Confidential:
External Documentation
Copyright © 2010 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
3 Analog Input Detection
3 Output
2 RS232 Interface
4. MVT600 and Accessories
MVT600 Main Unit with Battery
GPS Antenna
GSM Antenna
I/O Cable
SOS Button
USB Data Cable
CD
Optional Accessories
Camera
Handset Phone
RFID Reader
5. View
GSM LED
GPS LED
On/Off
GSM Antenna
GPS Antenna
Mic./Speaker
SIM
Micro SD
USB Port
Handset
Power, I/O
Camera
1
Camera
2
RS232
RFID Reader

File Name:
MEITRACK MVT600 User Guide
Creator:
Cavana Cheung
Project:
MVT600
Creation Date:
Update Date:
2010-09-13
2011-08-01
Sub Project:
User Guide
Page:
6 of 22
Revision:
V2.0
Confidential:
External Documentation
Copyright © 2010 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
6. First Use
6.1 Install SIM Card
Check that the SIM has not run out of credit (test the SIM in a phone to make sure it
can send and receive SMS);
Check that the SIM Lock code is turned off;
If you require the function of sending an SMS location report to the authorized phone
number when it makes a call to the MVT600, please make sure the SIM installed
supports displaying caller ID.
Before installing the SIM card, turn off the power for MVT600.
Unscrew and remove cover.
Insert the SIM card by sliding it into the card holder with the chip module facing to
the connectors on PCB.
Replace the cover and screw it in.
6.2 Charging
Please connect GND (-Black) and Power (+Red) wires to 12V or 24 external power and make sure to charge the
battery for at least 3 hours.8 hours is highly appreciated.
Configuration and testing suggested be prior to installation.
6.3 LED Indications
Press and hold the Power On/Off button for 3~5 seconds to turn on/off MVT600.
GPS LED (Blue)
On
One button is pressed or input is active.
Flashing ( every 0.1 second)
Initializing or back-up battery power is low
Flashing (0.1 second on and 2.9 seconds off)
MVT600 has a GPS fix
Flashing (1 second on and 2 seconds off)
MVT600 has no GPS fix
GSM LED (Green)
On
A call is coming in / a call is being made
Flashing ( every 0.1 second)
Initializing
Flashing (0.1 second on and 2.9 seconds off)
MVT600 is connected to the GSM network
GSM LED (green)
GPS LED (blue)
On/Off

File Name:
MEITRACK MVT600 User Guide
Creator:
Cavana Cheung
Project:
MVT600
Creation Date:
Update Date:
2010-09-13
2011-08-01
Sub Project:
User Guide
Page:
7 of 22
Revision:
V2.0
Confidential:
External Documentation
Copyright © 2010 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
Flashing (1 second on and 2 seconds off)
MVT600 is not connected to the GSM network
6.4 Track by Calling
Make a call to MVT600 and it will report with one SMS.
For example,
Now,110727 02:48,V,16,23Km/h,61%,http://maps.google.com/maps?f=q&hl=en&q=22.540103,114.082329
&ie=UTF8&z=16&iwloc=addr&om=1
Click on the link then the location can be shown directly on Google Maps on your mobile phone.
Report description:
Now,110727 02:48,V,16,23Km/h,61%,http://maps.google.com/maps?f=q&hl=en&q=22.540103,114.082329
&ie=UTF8&z=16&iwloc=addr&om=1
Content
Description
Note
Now
Current Location
Alarm Type
110721 16:40
Date & Time: 21 July, 2011, 16:40pm
Date & Time in YYMMDD HH:MM
V
No GPS fixed
GPS Status Indicator:
A = valid, V = invalid
10
GSM signal=10
GSM Signal. Decimal Digit (0~31)
0Km/h
Speed=0
KM/h. Decimal digit
97%
Battery Power: 97%
Battery Power Balance (Percentage)
http://maps.google.c
om/maps?f=q&hl=en
&q=22.540103,114.0
82329&ie=UTF8&z=1
6&iwloc=addr&om=1
Latitude: 22.513015
Longitude: 114.057235
Google Maps Web Link with Latitude and
Longitude. Click on the link to get the
location.
If your mobile cannot visit HTTP websites, input the latitude and longitude into Google Maps as the following
picture shows to get the position:

File Name:
MEITRACK MVT600 User Guide
Creator:
Cavana Cheung
Project:
MVT600
Creation Date:
Update Date:
2010-09-13
2011-08-01
Sub Project:
User Guide
Page:
8 of 22
Revision:
V2.0
Confidential:
External Documentation
Copyright © 2010 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
More SMS commands
You can configure MVT600 by mobile phone or by computer using the MEITRACK Parameter Editor.
For more details, please refer to part 6.5 Configure by Computer.
Note:
1. Password is 4 digits only and defaulted as 0000. You can change the password by Parameter Editor and SMS
command.
2. MVT600 will only accept commands from a user with the correct password and report SMS report to the user.
If preauthorized phone number was set, only this phone number can receive SMS reports.
6.4.1 Multiple Phone numbers–A71
Command: 0000, A71, phone number 1, phone number 2, phone number 3
SMS Get: IMEI, A71, OK
Note：
Authorize a phone number for SOS alarm, calling for location report, geo-fence alarm, and low battery alarm.
Phone Number: Max 16 characters.
If no preset phone number, it is empty (default is empty).
Send command “0000, A71”to delete all phone numbers.
When the SOS button is pressed, MVT600 will make a call to phone number 1, 2 and 3. It will stop calling when
one number answers.
Example: 0000,A71,13811111111,13822222222,13833333333
SMS Get: 353358017784062,A71,OK
6.4.2 Listening-in (Voice Monitoring)–A72
Command: 0000, A72, phone number 1, phone number 2
SMS Get: IMEI, A72, OK
Note:

File Name:
MEITRACK MVT600 User Guide
Creator:
Cavana Cheung
Project:
MVT600
Creation Date:
Update Date:
2010-09-13
2011-08-01
Sub Project:
User Guide
Page:
9 of 22
Revision:
V2.0
Confidential:
External Documentation
Copyright © 2010 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
Authorize a phone number to make a silent call to the tracker. The tracker will answer the call automatically and
allows the caller to listen to what is happening around the tracker. There is no sound when the tracker is working.
Phone Number: 2 monitoring numbers at the most can be set, 16 characters per number.
If no preset phone number, it is empty (default).
If no phone number, but has “,”, the number related to this “,” is deleted.
Send command “0000, A72”to delete all phone numbers.
Example: 0000,A72,13844444444,13855555555
SMS Get: 353358017784062,A72,OK
6.4.3 Sleep Mode –A73
Command: 0000,A73,X
SMS Get: IMEI,A73,OK
Note:
This setting is for power saving.
X= 0, turn off sleep mode (default).
X=1, normal sleep.
X=2, deep sleep.
Example: 0000,A73,2
SMS Get: 353358017784062,A73,OK
6.4.4 Geo-fence Alarm –B05
Command: B05,P,latitude,longitude,radius,in,out
SMS Get: IMEI,B05,OK
Note:
P: 1 to 8. Max 8 Geo-fence waypoints can be set.
Latitude: Latitude in decimal degrees of the waypoint center.
Longitude: Longitude in decimal degrees of the waypoint center.
Radius: [1, 4294967295] in meters.
In = 0, turn off the alarm when the tracker enters the waypoint;
In = 1, turn on the alarm when the tracker enters the waypoint.
Out = 0, turn off the alarm when the tracker exits the waypoint;
Out = 1, turn on the alarm when the tracker exits the waypoint.
Example: 0000,B05,1,22.91319,114.07988,1000,0,1
SMS Get: 353358017784062,B05,OK
Once the tracker goes outside of the circle (center: 22.91319,114.07988 and radius 1000 meters), the following
message will be received.
353358017784062,ExitGEO,22.918186,114.089823,080229123816,A,10,22,16,32,1,21,6667,850,,0000

File Name:
MEITRACK MVT600 User Guide
Creator:
Cavana Cheung
Project:
MVT600
Creation Date:
Update Date:
2010-09-13
2011-08-01
Sub Project:
User Guide
Page:
10 of 22
Revision:
V2.0
Confidential:
External Documentation
Copyright © 2010 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
6.4.5 Time Zone–B35
Command: 0000,B35,T
SMS Get: IMEI,B35,OK
Note:
Default time of the tracker is GMT. You can use this command to change the time on your tracker to your local
time. This command is for SMS tracking only.
Time zone of SMS report is separated with that of GPRS data. If you need to set time zone in GPRS data, please
use SMS command: 0000, B36, T
T=0, to turn off this function.
T=[-32768,32767] to set time difference in minutes to GMT.
For those ahead of GMT, just input the time difference in minutes directly. For example, GMT+8,
W000000,032,480
‘-‘is required for those behind GMT. For example, W000000,032,-120.
Example: 0000,B35,480
SMS Get: 353358017784062,B35,OK
For more details regarding SMS commands, please refer to MEITRACK SMS Protocol.
6.5 Configure by Computer
This part shows you the basics in how to use the MEITRACK Parameter Editor.
Note: Don’t connect MVT600 to external battery when configuring.
Please refer to the MEITRACK Parameter Editor User Guide for more detailed information regarding configuration
and functions.
Run ‘PL2303_Prolific_DriverInstaller’ to install the driver for the USB data cable.
Note: PL2303_Prolific_DriverInstaller is in the folder ‘USB-232 Driver’ in the CD.
Connect the USB Data Cable between MVT600 and PC.
Open Device Manager (Device Manager is under Control Panel\System and Security\System). You can then find
‘Prolific USB-to-Serial Comm Port’ as the following picture shows.

File Name:
MEITRACK MVT600 User Guide
Creator:
Cavana Cheung
Project:
MVT600
Creation Date:
Update Date:
2010-09-13
2011-08-01
Sub Project:
User Guide
Page:
11 of 22
Revision:
V2.0
Confidential:
External Documentation
Copyright © 2010 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
Note: Remember this Com number. It needs to be input into the MEITRACK Parameter Editor. It is COM3 in this
example and it would be COM4 or COM5…in your computer.
Run ‘MEITRACK Parameter Editor.exe’ and the following configuration window will pop up:
Choose the correct Com number and terminal type in previous Device Manager then click the ‘Open Port’button.
Click ‘Read Settings’button to show the default or previous settings of the tracker.
Note: MEITRACK Parameter Editor is in the CD. The language will be automatically adjusted to be the same as
your PC operation system’s language. Please use “Ctrl+L”to change the language.
6.5.1 SMS Tracking
6.5.1.1 Track by Preset Interval
Click Tap I: SMS Tracking

File Name:
MEITRACK MVT600 User Guide
Creator:
Cavana Cheung
Project:
MVT600
Creation Date:
Update Date:
2010-09-13
2011-08-01
Sub Project:
User Guide
Page:
12 of 22
Revision:
V2.0
Confidential:
External Documentation
Copyright © 2010 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
Item
Description
User Password
SMS password for sending SMS commands and defaulted as 0000.
Phone Number
A phone number to receive SMS location reports.
SMS Report Interval
Track by time interval via SMS.
Set time interval for SMS location report.
= 0, stop tracking by time interval (default);
= [1,65535], track by interval in minute.
Auto Report Times
= 0, unlimited times for report.
= [1,255], it will stop reporting when reaching preset times
Read
Read current tracker’s settings for above items.
Write
Write above settings to the tracker.
6.5.1.2 SMS Report
Click Tap V: Authorization

File Name:
MEITRACK MVT600 User Guide
Creator:
Cavana Cheung
Project:
MVT600
Creation Date:
Update Date:
2010-09-13
2011-08-01
Sub Project:
User Guide
Page:
13 of 22
Revision:
V2.0
Confidential:
External Documentation
Copyright © 2010 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
Item
Description
Authorization Phone
A phone number to receive selected event’s SMS reports.
Event
Selected event’s SMS reports will be sent to the authorized phone
number.
For more details, please refer to MEITRACK GPRS/SMS Protocol.
For description of events from SOS/Input 1 Active to Tow Alarm,
please refer to tap II GPRS Tracking.
Other events description, please refer to below chart.
Read
Read current tracker’s settings for above items.
Write
Write above settings to the tracker.
Event Description:
Event
Description
(If the box is ticked, authorized phone number will get event report

File Name:
MEITRACK MVT600 User Guide
Creator:
Cavana Cheung
Project:
MVT600
Creation Date:
Update Date:
2010-09-13
2011-08-01
Sub Project:
User Guide
Page:
14 of 22
Revision:
V2.0
Confidential:
External Documentation
Copyright © 2010 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
by SMS or calling)
SOS/Input 1 Active
Report when input1 (SOS) is active/pressed.
Input 2 Active
Report when input 2 is active.
Input 3 Active
Report when input 3 is active.
SOS/Input1 Inactive
Report when input 1 inactive (SOS released).
Input 2 Inactive
Report when input 2 inactive.
Input 3 Inactive
Report when input 3 inactive.
Low Battery
Report when backup battery’s voltage is below 3.5V.
Low External Power
External power (car battery) is lower than predefined voltage.
You can define voltage in Main Settings.
Speeding
Report when MVT600 speeds higher than the pre-set value.
Value can be changed on tap III Main Settings
Enter Geo-fence
Report when MVT600 enters Geo-fence.
Exit Geo-fence
Report when MVT600 exits Geo-fence.
Geo-fence can be changed on tap III Main Settings.
External Power On
Alarm when external power supply is on or recover.
External Power Off
Alarm when external power supply if off or cut.
No GPS Signal
Report when MVT600 enters GPS blind area or no GPS signal.
Get GPS Signal
Report when MVT600 exits GPS blind area or get GPS signal.
Enter Sleep
Report when MVT600 enters sleep mode.
Exit Sleep
Report when MVT600 exits sleep mode.
Sleep mode can be changed on tap III Main Settings.
GPS Antenna Cut
Alarm when the GPS antenna is disconnected or cut
Device Reboot
Report when MV600 is rebooting.
Impact
Alarm when MVT600 (with impact sensor) detects impact or crash.
Heartbeat Report
Turn on heartbeat report
You can define heartbeat interval on tap III Main Settings.
Heading Change Report
Auto report when MVT600’s direction changes over predefined angle
You can define angle degree on tap III Main Settings.
Distance Interval Report
Track by distance.
Interval can be changed on tap III Main Settings.
Tow Alarm
Alarm when the tracker trembles for a period of time.
You can define tow time on tap III Main Settings.
Press Input 1 (SOS) to call
Make a call to authorized phone number when press input 1 (SOS).
Press Input 2 to call
Make a call to authorized phone number when press input 2.
Press Input 3 to call
Make a call to authorized phone number when press input 3.
Reject Incoming Call
Hand up automatically incoming call from correspondent authorized
phone number.
Call for SMS Location Report
Reject incoming call or report SMS location when no answer.
Auto Answer Incoming Call
Auto answer the incoming call for conversation
Listen-in (voice monitoring)
Auto answer the incoming call for voice monitoring

File Name:
MEITRACK MVT600 User Guide
Creator:
Cavana Cheung
Project:
MVT600
Creation Date:
Update Date:
2010-09-13
2011-08-01
Sub Project:
User Guide
Page:
15 of 22
Revision:
V2.0
Confidential:
External Documentation
Copyright © 2010 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
6.5.2 GPRS Tracking
Click Tap II: GPRS Tracking
Item
Description
GPRS
Select TCP/UDP to enable GPRS communication.
GPRS Interval
Track by time interval via GPRS.
Set time interval for GPRS tracking.
Interval is in unit of 10 seconds.
Interval = 0, stop tracking by time interval.
Max time interval = 65535*10 seconds
GPRS Report Times
= 0, report without limit.
= [1,65535], set report times, MVT600 will stop reporting when reaching
the times.
IP & Port
Input server’s IP address and port number.
Secondary IP and Port
(Backup Server)
Input backup server’s IP address and port number to avoid data losing
when main server is down. The backup server will receive data
automatically.
APN
APN user name
APN, APN username, APN password: max 32 bytes.
If no username and password required, leave them blank.

File Name:
MEITRACK MVT600 User Guide
Creator:
Cavana Cheung
Project:
MVT600
Creation Date:
Update Date:
2010-09-13
2011-08-01
Sub Project:
User Guide
Page:
16 of 22
Revision:
V2.0
Confidential:
External Documentation
Copyright © 2010 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
APN password
Tracker ID
MVT600’s IMEI. It is the only ID in GPRS packet.
Read
Read current tracker’s settings for above items.
Write
Write above settings to the tracker.
Tick the box for receiving GPRS report.
Event Description:
Event
Description
(If the box is ticked, authorized phone number will get event report
by SMS or calling)
SOS/Input 1 Active
Report when input1 (SOS) is active/pressed.
Input 2 Active
Report when input 2 is active.
Input 3 Active
Report when input 3 is active.
SOS/Input1 Inactive
Report when input 1 inactive (SOS released).
Input 2 Inactive
Report when input 2 inactive.
Input 3 Inactive
Report when input 3 inactive.
Low Battery
Report when backup battery’s voltage is below 3.5V.
Low External Power
External power (car battery) is lower than predefined voltage.
You can define voltage in Main Settings.
Speeding
Report when MVT600 speeds higher than the pre-set value.
Value can be changed on tap III Main Settings
Enter Geo-fence
Report when MVT600 enters Geo-fence.
Exit Geo-fence
Report when MVT600 exits Geo-fence.
Geo-fence can be changed on tap III Main Settings.
External Power On
Alarm when external power supply is on or recover.
External Power Off
Alarm when external power supply if off or cut.
No GPS Signal
Report when MVT600 enters GPS blind area or no GPS signal.
Get GPS Signal
Report when MVT600 exits GPS blind area or get GPS signal.
Enter Sleep
Report when MVT600 enters sleep mode.
Exit Sleep
Report when MVT600 exits sleep mode.
Sleep mode can be changed on tap III Main Settings.
GPS Antenna Cut
Alarm when the GPS antenna is disconnected or cut
Device Reboot
Report when MV600 is rebooting.
Impact
Alarm when MVT600 (with impact sensor) detects impact or crash.
Heartbeat Report
Turn on heartbeat report
You can define heartbeat interval on tap III Main Settings.
Heading Change Report
Auto report when MVT600’s direction changes over predefined angle
You can define angle degree on tap III Main Settings.
Distance Interval Report
Track by distance.
Interval can be changed on tap III Main Settings.
Tow Alarm
Alarm when the tracker trembles for a period of time.

File Name:
MEITRACK MVT600 User Guide
Creator:
Cavana Cheung
Project:
MVT600
Creation Date:
Update Date:
2010-09-13
2011-08-01
Sub Project:
User Guide
Page:
17 of 22
Revision:
V2.0
Confidential:
External Documentation
Copyright © 2010 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
You can define tow time on tap III Main Settings.
RFID
RFID data.
For more information about GPRS settings, please refer to MEITRACK SMS/GPRS Protocol.
7. Installation
7.1 Install I/O Cable
The I/O cable is a 12-pin cable including power, analog input, negative/positive input and output.
I/O
1
Power(+)
3
Input 3
5
Input 2
7
Output 1
9
Output 2
11
Output 3
2
GND(-)
4
Input 1 (-)
6
GND(-)
8
AD Input 1
10
AD Input 2
12
AD Input 3
PIN Number
Color
Description
1 (Power)
Red
DC In (power source). Input voltage: 9V~36V. 12V suggested
2 (GND)
Black
Ground
3 (IN3)
White
Digital Input3. Positive triggering, for detecting status of vehicle door or ACC.
4 (IN1)
White
Digital Input1. Negative triggering( Defaulted as SOS Panic Button)
5 (IN2)
White
Digital Input2. Negative triggering, for detecting status of vehicle door.
6 (GND)
Black
Ground. It can be used to connect with temperature/fuel sensor etc.
7 (OUT1)
Yellow
Output1. It can be used to connect with relay for engineer immobilization.
Low voltage (0V) when effective and open drain when ineffective.
Output open drain sink voltage (ineffective): 45V max.
Output low voltage sink current (effective): 500mA max
8 (AD1)
Blue
12 Bits Resolution Analog Input1. 0~6V DC Detection. It can be used to connect
with temperature/fuel sensor etc.
9 (OUT2)
Yellow
Output2. It can be used to connect with relay for engineer immobilization.
Low voltage (0V) when effective and open drain when ineffective.
Output open drain sink voltage (ineffective): 45V max.
Output low voltage sink current (effective): 500mA max.

File Name:
MEITRACK MVT600 User Guide
Creator:
Cavana Cheung
Project:
MVT600
Creation Date:
Update Date:
2010-09-13
2011-08-01
Sub Project:
User Guide
Page:
18 of 22
Revision:
V2.0
Confidential:
External Documentation
Copyright © 2010 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
10 (AD2)
Blue
12 Bits Resolution Analog Input2. 0~6V DC Detection. It can be used to connect
with temperature/fuel sensor etc.
11 (OUT3)
Yellow
Output3. It can be used to connect with relay for engineer immobilization.
Low voltage (0V) when effective and open drain when ineffective.
Output open drain sink voltage (ineffective): 45V max.
Output low voltage sink current (effective): 500mA max.
12 (AD3)
Blue
12 Bits Resolution Analog Input3. 0~6V DC Detection. It can be used to connect
with relay for engineer immobilization.
Power/GND (PIN1/ PIN2)
Connect GND (-Black) and Power (+Red) wires to the battery of vehicle.
7.1.2 Digital Input (PIN4/5, negative triggering)
7.1.3 Digital Input (PIN3, positive triggering)

File Name:
MEITRACK MVT600 User Guide
Creator:
Cavana Cheung
Project:
MVT600
Creation Date:
Update Date:
2010-09-13
2011-08-01
Sub Project:
User Guide
Page:
19 of 22
Revision:
V2.0
Confidential:
External Documentation
Copyright © 2010 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
7.1.4 Output
7.1.5 Analog Input
7.1.5.1 Analog Input Application 1–Detect External Power Voltage
Input range：0-6V
Voltage Caculating Formula: input voltage=(AD*3.3*2)/4096
0x0C9B=>3227(decimal)=>(3227*3.3*2)/4096=5.1997V(voltage)
0x0D9D=>3845(decimal)=>(3845*3.3*2)/4096=5.6154V(voltage)
7.1.5.2 Analog Input Application 2 –Fuel Detection (percentage of fuel)
Note:
Fuel level sensors supplied by us are resistance-type sensors with output resistance: 0-200Ω (ohm).
For the circuit shown on above figure, if VCC is 12V, R should be 200Ω (ohm) and if VCC is 24V then R should
be 600Ω (ohm) to make the input range to AD1 or AD2 is 0-6V.
Below formula is for calculating the fuel percentage left for this fuel level sensor:
The value must be converted into decimal, for example, 0x0267 is 615 in decimal.
Percentage Left =
* 100%
1.1*AD value
4096 X 2 –1.1*AD value

File Name:
MEITRACK MVT600 User Guide
Creator:
Cavana Cheung
Project:
MVT600
Creation Date:
Update Date:
2010-09-13
2011-08-01
Sub Project:
User Guide
Page:
20 of 22
Revision:
V2.0
Confidential:
External Documentation
Copyright © 2010 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
7.1.6 Install Handset Phone (RS232 Interface)
PIN Number
Color
Description
1
Red
Power Output. Output Voltage: 5V
2
Black
Ground
3
White
Handset Phone RS232 TX (MVT600 RX)
4
Yellow
Handset Phone RS232 RX (MVT600 TX)
5
Orange
Microphone Positive
6
Grey
Microphone Negative
7
Purple
Speaker Positive
8
Brown
Speaker Negative
Note: This interface also supports LCD display;navigator provided conforms to MEITRACK Protocol.
7.1.7 Install Camera (RS232 Interface)
Camera1 RS232 Interface
PIN Number
Color
Description
1
Red
Power Output. Output Voltage: 5V
2
Black
Ground
3
Yellow
Camera RS232 TX (MVT600 RX)
4
Green
Camera RS232 RX (MVT600 TX)
Camera2 RS232 Interface
PIN Number
Color
Description
1
Red
Power Output. Output Voltage: 5V
2
Black
Ground
3
Yellow
Camera RS232 TX (MVT600 RX)
4
Green
Camera RS232 RX (MVT600 TX)
GPS RS232 Data Interface
PIN Number
Color(Suggested)
Description