Mellerware Sirion 35600 User manual

Model:
35600
900W
PLEASE READ ALL INSTRUCTIONS BEFORE USE
sirion wall mount
heater

Sirion Wall Mount Heater
35600
Dear customer,
Many thanks for choosing to purchase a
Mellerware brand product.
Thanks to its technology, design and operation
and the fact that it exceeds the strictest quality
standards, a fully satisfactory use and long
product life can be assured.
Description
A Sliding heat selector
B Housing
C Floor stand
D Protective mesh grill
IMPORTANT SAFETYGUARDS
Please read and save these important safety
instructions when using electrical appliances.
Basic precautions should always be followed to
reduce the risk of fire, electric shock, and/or injury
to persons. Including the following:
1. The packaging materials contain plastic, nails,
etc. which may be hazardous and therefore
should not be left within reach of children.
2. Do not use your heater in the presence of
explosive or flammable substances.
3. Warning: In order to avoid overheating, do not
cover the heater.
4. Do not place the heater near or below a wall
socket.
5. Do not cover or obstruct protective mesh grill.
6. Do not insert foreign objects through the
intake or discharge grills.
7. Ensure there is a secure and tight connection
between the plug and the wall socket to avoid
over heating or malfunctioning of the plug.
8. To unplug the heater, grasp the plug and pull it
out from the wall socket. Never pull on the
cord, because there is danger of damaging
the cord and even electric shock (even if the
heater is switched off).
9. Maintain a sufficient distance between the
heater and objects. This will allow the hot air
to be properly circulated, and avoid over
heating of the heater and the surrounding
environment. (1m distance is
recommended)
INSTRUCTIONS FOR USE:
DA
B
C

10. Avoid installation behind a door.
11. Do not use any accessories not
recommended by the manufacturer, as this
could damage the heater and therefore void
the guarantee.
12. As with all electrical appliances, this heater
should never be used under conditions
where it may be immersed, or come into
contact with water. Do not install the heater
in the immediate vicinity of bath tubs,
showers, wash basins, swimming pools, etc.
13. Do not operate if this unit is damaged. Return
the heater to the manufacturer or approved
service agent for repairs. Do not repair
yourself as this will void the guarantee.
14. Unplug before cleaning.
15. If the power supply cord is damaged, it must
be replaced by the manufacturer or approved
service agent.
16. When not in use, store your heater in a cool
dry place.
17. The heater is intended for normal domestic
use only.
18. This appliance is intended for adult use.
Ensure that this product is not used by the
disabled, children or people unused to its.
19. Do not allow the power cord to hang or to
come into contact with the hot surfaces of the
appliance
SPECIFICATIONS
Voltage: 220-240V
Frequency: 50Hz
Total input power: 900W
FUNCTION/HEAT SELECTOR
0 OFF
I 300W
II 600W
III900W
To select the desired heat setting, slide the
function/heat selector to the level that you
are most comfortable with, according to the
functions above.
CLEANING AND CARE
1.Before cleaning the heater, ensure it is
disconnected from the wall socket, and has
cooled down completely.
2.To avoid the risk of electric shock, do not clean
the heater with water and do not immerse it in
liquid.
3.The housing may be wiped with a slightly damp,
lint free cloth.
4.If necessary, dust particles accumulated in the
air outlet openings may be removed with a
vacuum cleaner.