Members Mark SMFPC-33-3 Owner's manual

Need Assistance? Visit us at: samsclub.com/membersmarkhelp 1 | P a g e
Assembly Instructions & User’s Manual
for
Lochlan Media Fireplace
Model Number: SMFPC-33-3 / SMFPC-33-3-E
Customer Assistance (spare/replacement parts): 1-866-942-5362
or Email: [email protected]
THIS ASSEMBLY MANUAL CONTAINS IMPORTANT. SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
LOT NUMBER: DATE PURCHASED: / /

Need Assistance? Visit us at: samsclub.com/membersmarkhelp 2 | P a g e
Table of Contents
Quality Statement.....................................................................................................................................3
Important Safety Information................................................................................................................3
Before Assembly......................................................................................................................................3
Care & Use.................................................................................................................................................3
Package Contents....................................................................................................................................4
Product Information ................................................................................................................................4
Components..............................................................................................................................................5
Hardware....................................................................................................................................................5
Tools (Not Included)................................................................................................................................5
Step 1 ..........................................................................................................................................................6
Step 2 ..........................................................................................................................................................7
Step 3 ..........................................................................................................................................................8
Step 4 - Hinge adjustment .....................................................................................................................9
Step 5 ........................................................................................................................................................10
Step 6 ........................................................................................................................................................11
Warning.......................................................................................................................................12
Troubleshooting.....................................................................................................................................13
Care & Use Instructions.......................................................................................................................13
Warranty Information............................................................................................................................13

Need Assistance? Visit us at: samsclub.com/membersmarkhelp 3 | P a g e
Quality Statement
Important Safety Information
•Please read all instructions carefully before assembling this product.
•Where applicable, and for your safety, assembly by an adult is strongly recommended.
•Use only vendor-supplied hardware to assemble this item. Using unauthorized
hardware could jeopardize the structural integrity of the item.
•Hardware may loosen overtime. Periodically check that all connections are tight.
•NOTICE: To prevent injury and property damage from unexpected tipping of
furniture, we highly recommend installation of the anti-tip kit included with this
product.
Before Assembly
•Remove all parts and hardware from the box. Place all items on a carpeted or
scratch-free work surface, as this will avoid damaging parts during assembly.
•The shipping box can provide an ideal work surface if none is available.
•Use the components and hardware lists below to identify, inventory and separate
each of the hardware and components included.
•To avoid accidentally discarding small components or hardware, do not dispose of
any packaging or contents of the shipping carton until assembly is complete.
•DO NOT USE power tools unless it is explicitly identified in this manual as required
for use during assembly. Power tools can damage the fasteners, hardware and/or
components.
•Do not fully tighten all fasteners / screws until all parts are in place. Failure to follow
these instructions may cause the fasteners / screws to misalign during assembly.
Care & Use
•Use a soft, clean cloth that will not scratch the surface when dusting.
•Use of furniture polish is not necessary. Should you choose to use polish, test first in
an inconspicuous area.
•Using solvents of any kind on your furniture may damage the finish.
•Never use water to clean your furniture as it may cause damage to the finish.
•Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill
gently. Avoid rubbing.
•Do not place furniture in direct sunlight.

Need Assistance? Visit us at: samsclub.com/membersmarkhelp 4 | P a g e
Package Contents
Component
Description
Quantity
A
Fireplace
1
B
Adjustable Shelf
2
Product Information
Dimensions –66” x 19” x 37” (167.6cm x 48.3cm x 94cm)
Weight Capacity
A
B
FITS UP TO MOST 190.5 cm / 75”
DIAGONAL FLAT-PANEL TVs
MAXIMUM LOAD 45.4 kg / 100 lb
MAXIMUM LOAD 2.2 kg / 5 lb
MAXIMUM LOAD 22.7 kg / 50 lb
Place TV behind the stopper
THIS UNIT IS NOT INTENDED FOR USE WITH CRT TVS. USE ONLY WITH FLAT PANEL
TVS AND AUDIO/VIDEO EQUIPMENT MEETING RECOMMENDED SIZE AND WEIGHT LIMITS. NEVER USE
WITH LARGER/HEAVIER THAN RECOMMENDED FLAT PANEL TVS OR EQUIPMENT. TO AVOID INSTABILITY,
PLACE FLAT PANEL TV IN THE CENTER OF THE UNIT; THE BASE OF THE TELEVISION MUST BE ABLE TO REST
ON THE SUPPORTING SURFACE OF THE UNIT WITHOUT OVER-HANGING THE EDGES. IMPROPERLY
POSITIONED FLAT PANEL TVS, OR FLAT PANEL TVS INCLUDING OTHER EQUIPMENT THAT EXCEED
RECOMMENDED SIZE AND WEIGHT LIMITS COULD FALL OFF OR BREAK THE UNIT, CAUSING POSSIBLE
SERIOUS INJURY. FOR USE WITH TELEVISIONS WEIGHING 100 LBS (45.4 KG) OR LESS. USE WITH HEAVIER
TELEVISIONS MAY RESULT IN INSTABILITY CAUSING TIP OVER RESULTING IN DEATH OR SERIOUS INJURY.
WARNING

Need Assistance? Visit us at: samsclub.com/membersmarkhelp 5 | P a g e
Components
Component A
Part No. not available
Qty 1
Component B
Part No. 00SMFPC-33-3-B
Qty 2
Hardware
Shelf Support (H1)
Part No. 00SMFPC-33-3-T
Qty: 8+1 extra
Acrylic Stopper (H2)
Part No. 00SMFPC-33-3-U
Qty: 1
Hex Wrench (H3)
Part No. 00SMFPC-33-3-V
Qty: 1
Touch-up Pen (H4)
Part No. 00SMFPC-33-3-W
Qty: 1
Tipping Restraint Hardware Kit (H5)
Part No. 00SMFPC-33-3-X
Qty: 2
Tools (Not Included)
Phillips Screwdriver
Stud Finder
Power Drill
3 mm
18"

Need Assistance? Visit us at: samsclub.com/membersmarkhelp 6 | P a g e
Step 1
a) Unpack the units and confirm that you have all hardware and required parts.
b) Open the doors and insert four Shelf Supports (H1) in the holes at the desired height inside
each compartment. Make sure you place the four Shelf Supports at the same level, so the
shelf is not tilted.
c) Tilt and rest the Adjustable Shelves (B) onto the Shelf Supports (H1).
H1 x 8
B
B
B
A

Need Assistance? Visit us at: samsclub.com/membersmarkhelp 7 | P a g e
A
Step 2
a) If you need to remove the drawer, please press the Release Levers on the mechanisms pre-
attached underneath the drawer kit at both ends.
b) If necessary, you can push the Adjustment Clips on the bottom mechanisms to adjust the top
and bottom gaps of the drawer.
Adjustment clip
Release lever

Need Assistance? Visit us at: samsclub.com/membersmarkhelp 8 | P a g e
A
Step 3
a) The vented rear panel is removable for easy access to audio and video component hook-up.
Be sure to route the cables through the cutout.
Cable channel

Need Assistance? Visit us at: samsclub.com/membersmarkhelp 9 | P a g e
Step 4 - Hinge adjustment
a) Loosen or tighten the indicated screw to adjust the gaps forward and backward between
doors and console.
b) Rotate the screw clockwise or counterclockwise to adjust the door horizontally as shown.
c) Loosen or tighten the indicated screw to adjust the door vertically to the desired position.
Lateral
adjustment
Height
adjustment
Depth
adjustment
1
2
2~3mm
2
2mm
3
2mm

Need Assistance? Visit us at: samsclub.com/membersmarkhelp 10 | P a g e
Step 5
NOTE: To prevent your TV from tipping, you must follow these instructions if you place a flat
panel television on top of your console. Otherwise, remove the acrylic stopper template
directly.
a) Remove the paper backing from the Acrylic Stopper (H2) and place it in the cut-out of the
acrylic stopper template on the front of the top panel. Make sure it is properly aligned before
applying pressure.
b) Now, remove the acrylic stopper template carefully.
H2 x 1
A
A