Members Mark GT-12289A-AAR Owner's manual

1 | P a g e
Assembly Instructions & User’s Manual
For
Member’s Mark Halstead Towel Valet
Item Number: 990018888
Model Number: GT-12289A-AAR
Customer Assistance (spare/replacement parts): 1-888-691-2824
or Email: [email protected]
THIS ASSEMBLY MANUAL CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.

2 | P a g e
Table of Contents
Quality Statement ....................................................................................................................................3
Important Safety Information................................................................................................................3
Before Assembly .....................................................................................................................................3
Care & Use.................................................................................................................................................3
Package Contents ...................................................................................................................................4
Product Information ................................................................................................................................5
Components..............................................................................................................................................5
Hardware....................................................................................................................................................5
Tools ...........................................................................................................................................................5
Step 1 .........................................................................................................................................................6
Step 2 ...........................................................................................................................................7
Step 3 .........................................................................................................................................................8
Step 4 ...........................................................................................................................................9
Step 5 .........................................................................................................................................10
Warranty Information............................................................................................................................11

3 | P a g e
Quality Statement
Important Safety Information
Please read all instructions carefully before assembling this product.
Where applicable, and for your safety, assembly by an adult is strongly
recommended.
Use only vendor-supplied hardware to assemble this item. Using unauthorized
hardware could jeopardize the structural integrity of the item.
Hardware may loosen overtime. Periodically check that all connections are tight.
Before Assembly
Remove all parts and hardware from the box. Place all items on a carpeted or
scratch-free work surface, as this will avoid damaging parts during assembly.
The shipping box can provide an ideal work surface if none is available.
Use the components and hardware lists below to identify, inventory and separate
each of the hardware and components included.
To avoid accidentally discarding small components or hardware, do not dispose
of any packaging or contents of the shipping carton until assembly is complete.
DO NOT USE power tools unless it is explicitly identified in this manual as
required for use during assembly. Power tools can damage the fasteners,
hardware and/or components.
Do not fully tighten all fasteners / screws until all parts are in place. Failure to
follow these instructions may cause the fasteners / screws to misalign during
assembly.
Care & Use
Use a soft, clean cloth that will not scratch the surface when cleaning.

4 | P a g e
Package Contents
Component
Description
Quantity
Component
Description
Quantity
A
Left leg frame
1
G
Woven panel 2
2
B
Right leg frame
1
H
Woven panel 3
1
C
Shelf 1
1
I
Allen/Hex Head Bolt
M6x40mm
12
D
Shelf 2
1
J
Allen/Hex Head Bolt
M6x35mm
16
E
Shelf 3
2
K
Allen/Hex Head Bolt
M6x20mm
4
F
Woven panel 1
2
L
M6 Washer
32
Need Assistance? Visit us at: samsclub.com/membersmarkhelp

5 | P a g e
Product Information
Product Dimensions
Towel Valet: 31.75"x20"x60.4" (80.6cmx 50.8cmx 153.4cm)
Product Weight Capacity
Table: Supports up to 100 lbs. (45 kg)
Components
(A)
Left leg frame
Qty: 1pc
(B)
Right leg frame
Qty: 1pc
(C)
Shelf 1
Qty: 1pc
(D)
Shelf 2
Qty: 1pc
(E)
Shelf 3
Qty: 2pcs
(F)
Woven panel 1
Qty: 2pcs
(G)
Woven panel 2
Qty: 2pcs
(H)
Woven panel 3
Qty: 1pc
Hardware
(I)
Allen/Hex Head Bolt
M6x40mm
Qty: 12pcs
(J)
Allen/Hex Head Bolt
M6x35mm
Qty: 16pcs
(K)
Allen/Hex Head Bolt
M6x20mm
Qty: 4pcs
(L)
M6 Washer
Qty: 32pcs
Tools
(M)
M6 Allen Wrench
Qty: 1pc
Need Assistance? Visit us at: samsclub.com/membersmarkhelp

6 | P a g e
Step 1
(A)
Left leg frame
Qty: 1pc
(C)
Shelf 1
Qty: 1pc
(D)
Shelf 2
Qty: 1pc
(E)
Shelf 3
Qty: 2pcs
(J)
Allen/Hex Head Bolt
M6x35mm
Qty: 8pcs
(K)
Allen/Hex Head Bolt
M6x20mm
Qty: 2pcs
(L)
M6 Washer
Qty: 10pcs
(M)
M6 Allen Wrench
Qty: 1pc
Carefully place the Left leg frame (A) upside down on a non-abrasive surface.
Assemble the Shelf 1 (C), Shelf 2 (D) and Shelf 3 (E) to Left leg frame (A) with M6 bolts
(K), M6 bolts (J) and M6 Washer (L) by using M6 Allen Wrench (M).
Do not tighten the bolts until assembling is completed.
Need Assistance? Visit us at: samsclub.com/membersmarkhelp

7 | P a g e
Step 2
(B)
Right leg frame
Qty: 1pc
(J)
Allen/Hex Head Bolt
M6x35mm
Qty: 8pcs
(K)
Allen/Hex Head Bolt
M6x20mm
Qty: 2pcs
(L)
M6 Washer
Qty: 10pcs
(M)
M6 Allen Wrench
Qty: 1pc
Assemble the Shelf 1 (C), Shelf 2 (D) and Shelf 3 (E) to Right leg frame (B) with M6
bolts (K), M6 bolts (J) and M6 Washer (L) by using M6 Allen Wrench (M).
Tighten all bolts with M6 Allen Wrench (M).
Need Assistance? Visit us at: samsclub.com/membersmarkhelp

8 | P a g e
Step 3
(F)
Woven panel 1
Qty: 2pcs
(H)
Woven panel 3
Qty: 1pc
(I)
Allen/Hex Head Bolt
M6x40mm
Qty: 4pcs
(L)
M6 Washer
Qty: 4pcs
(M)
M6 Allen Wrench
Qty: 1pc
Assemble the Woven panel 1 (F) to Woven panel 3 (H) with M6 bolts (I) and M6 Washer
(L) by using M6 Allen Wrench (M).
Do not tighten the bolts until assembling is completed.
Need Assistance? Visit us at: samsclub.com/membersmarkhelp

9 | P a g e
Step 4
(G)
Woven panel 2
Qty: 2pcs
(I)
Allen/Hex Head Bolt
M6x40mm
Qty: 8pcs
(L)
M6 Washer
Qty: 8pcs
(M)
M6 Allen Wrench
Qty: 1pc
Assemble the Woven panel 2 (G) to Woven panel 3 (H) with M6 bolts (I) and M6
Washer (L) by using M6 Allen Wrench (M).
Tighten all bolts with M6 Allen Wrench (M).
Need Assistance? Visit us at: samsclub.com/membersmarkhelp

10 | P a g e
Step 5
Carefully turn the Towel Valet over.
The Towel Valet is ready for your enjoyment.
Need Assistance? Visit us at: samsclub.com/membersmarkhelp